Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/u-boot/arch/arm/mach-sunxi/Kconfig

610 	bool "Enable graphical uboot console on HDMI, LCD or VGA"
619 	Say Y here to add support for using a cfb console on the HDMI, LCD
638 	bool "VGA via LCD controller support"
643 	LCD interface driving a VGA connector, such as found on the
647 	bool "Force sync active high for VGA via LCD controller support"
657 	string "LCD panel power enable pin"
672 	string "LCD panel timing details"
676 	LCD panel timing details string, leave empty if there is no LCD panel.
679 	Also see: http://linux-sunxi.org/LCD
682 	int "LCD panel display clock phase"
686 	Select LCD panel display clock phase shift, range 0-3.
689 	string "LCD panel power enable pin"
693 	Set the power enable pin for the LCD panel. This takes a string in the
697 	string "LCD panel reset pin"
701 	Set the reset pin for the LCD panel. This takes a string in the format
705 	string "LCD panel backlight enable pin"
709 	Set the backlight enable pin for the LCD panel. This takes a string in the
714 	string "LCD panel backlight pwm pin"
718 	Set the backlight pwm pin for the LCD panel. This takes a string in the
722 	bool "LCD panel backlight pwm is inverted"
729 	bool "LCD panel needs to be configured via i2c"
734 	Say y here if the LCD panel needs to be configured via i2c. This
735 	will add a bitbang i2c controller using gpios to talk to the LCD.
738 	string "LCD panel i2c interface SDA pin"
742 	Set the SDA pin for the LCD i2c interface. This takes a string in the
746 	string "LCD panel i2c interface SCL pin"
750 	Set the SCL pin for the LCD i2c interface. This takes a string in the
778 	prompt "LCD panel support"
781 	Select which type of LCD panel to support.
784 	bool "Generic parallel interface LCD panel"
788 	bool "Generic lvds interface LCD panel"
792 	bool "MIPI 4-lane, 513Mbps LCD panel via SSD2828 bridge chip"
796 	7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0
799 	bool "eDP 4-lane, 1.62G LCD panel via ANX9804 bridge chip"
804 	Select this for eDP LCD panels with 4 lanes running at 1.62G,
808 	bool "Hitachi tx18d42vm LCD panel"
812 	7.85" 1024x768 Hitachi tx18d42vm LCD panel support
815 	bool "tl059wv5c0 LCD panel"