Lines Matching +full:disable +full:- +full:wp
4 * Copyright (C) 2011 - 2015 Xilinx
7 * SPDX-License-Identifier: GPL-2.0+
9 /dts-v1/;
10 #include "zynq-7000.dtsi"
14 compatible = "xlnx,zynq-zc706", "xlnx,zynq-7000";
31 stdout-path = "serial0:115200n8";
35 compatible = "usb-nop-xceiv";
36 #phy-cells = <0>;
41 ps-clk-frequency = <33333333>;
46 phy-mode = "rgmii-id";
47 phy-handle = <ðernet_phy>;
48 pinctrl-names = "default";
49 pinctrl-0 = <&pinctrl_gem0_default>;
51 ethernet_phy: ethernet-phy@7 {
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_gpio0_default>;
63 clock-frequency = <400000>;
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_i2c0_default>;
69 #address-cells = <1>;
70 #size-cells = <0>;
74 #address-cells = <1>;
75 #size-cells = <0>;
77 si570: clock-generator@5d {
78 #clock-cells = <0>;
80 temperature-stability = <50>;
82 factory-fout = <156250000>;
83 clock-frequency = <148500000>;
88 #address-cells = <1>;
89 #size-cells = <0>;
91 adv7511: hdmi-tx@39 {
94 adi,input-depth = <8>;
95 adi,input-colorspace = "yuv422";
96 adi,input-clock = "1x";
97 adi,input-style = <3>;
98 adi,input-justification = "evenly";
103 #address-cells = <1>;
104 #size-cells = <0>;
113 #address-cells = <1>;
114 #size-cells = <0>;
119 gpio-controller;
120 #gpio-cells = <2>;
125 #address-cells = <1>;
126 #size-cells = <0>;
135 #address-cells = <1>;
136 #size-cells = <0>;
147 pinctrl_gem0_default: gem0-default {
155 slew-rate = <0>;
156 io-standard = <4>;
159 conf-rx {
161 bias-high-impedance;
162 low-power-disable;
165 conf-tx {
167 low-power-enable;
168 bias-disable;
171 mux-mdio {
176 conf-mdio {
178 slew-rate = <0>;
179 io-standard = <1>;
180 bias-disable;
184 pinctrl_gpio0_default: gpio0-default {
192 slew-rate = <0>;
193 io-standard = <1>;
196 conf-pull-up {
198 bias-pull-up;
201 conf-pull-none {
203 bias-disable;
207 pinctrl_i2c0_default: i2c0-default {
215 bias-pull-up;
216 slew-rate = <0>;
217 io-standard = <1>;
221 pinctrl_sdhci0_default: sdhci0-default {
229 slew-rate = <0>;
230 io-standard = <1>;
231 bias-disable;
234 mux-cd {
239 conf-cd {
241 bias-high-impedance;
242 bias-pull-up;
243 slew-rate = <0>;
244 io-standard = <1>;
247 mux-wp {
252 conf-wp {
254 bias-high-impedance;
255 bias-pull-up;
256 slew-rate = <0>;
257 io-standard = <1>;
261 pinctrl_uart1_default: uart1-default {
269 slew-rate = <0>;
270 io-standard = <1>;
273 conf-rx {
275 bias-high-impedance;
278 conf-tx {
280 bias-disable;
284 pinctrl_usb0_default: usb0-default {
292 slew-rate = <0>;
293 io-standard = <1>;
296 conf-rx {
298 bias-high-impedance;
301 conf-tx {
304 bias-disable;
310 u-boot,dm-pre-reloc;
315 u-boot,dm-pre-reloc;
317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_sdhci0_default>;
322 u-boot,dm-pre-reloc;
324 pinctrl-names = "default";
325 pinctrl-0 = <&pinctrl_uart1_default>;
331 usb-phy = <&usb_phy0>;
332 pinctrl-names = "default";
333 pinctrl-0 = <&pinctrl_usb0_default>;