Lines Matching +full:mux +full:- +full:gpios
4 * Copyright (C) 2011 - 2015 Xilinx
7 * SPDX-License-Identifier: GPL-2.0+
9 /dts-v1/;
10 #include "zynq-7000.dtsi"
14 compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000";
31 stdout-path = "serial0:115200n8";
34 gpio-keys {
35 compatible = "gpio-keys";
36 #address-cells = <1>;
37 #size-cells = <0>;
41 gpios = <&gpio0 12 0>;
43 wakeup-source;
48 gpios = <&gpio0 14 0>;
50 wakeup-source;
56 compatible = "gpio-leds";
60 gpios = <&gpio0 10 0>;
61 linux,default-trigger = "heartbeat";
66 compatible = "usb-nop-xceiv";
67 #phy-cells = <0>;
73 compatible = "mmio-sram";
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_can0_default>;
85 ps-clk-frequency = <33333333>;
90 phy-mode = "rgmii-id";
91 phy-handle = <ðernet_phy>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_gem0_default>;
94 phy-reset-gpio = <&gpio0 11 0>;
95 phy-reset-active-low;
97 ethernet_phy: ethernet-phy@7 {
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_gpio0_default>;
109 clock-frequency = <400000>;
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_i2c0_default>;
115 #address-cells = <1>;
116 #size-cells = <0>;
120 #address-cells = <1>;
121 #size-cells = <0>;
123 si570: clock-generator@5d {
124 #clock-cells = <0>;
126 temperature-stability = <50>;
128 factory-fout = <156250000>;
129 clock-frequency = <148500000>;
134 #address-cells = <1>;
135 #size-cells = <0>;
137 adv7511: hdmi-tx@39 {
140 adi,input-depth = <8>;
141 adi,input-colorspace = "yuv422";
142 adi,input-clock = "1x";
143 adi,input-style = <3>;
144 adi,input-justification = "right";
149 #address-cells = <1>;
150 #size-cells = <0>;
159 #address-cells = <1>;
160 #size-cells = <0>;
165 gpio-controller;
166 #gpio-cells = <2>;
171 #address-cells = <1>;
172 #size-cells = <0>;
181 #address-cells = <1>;
182 #size-cells = <0>;
201 pinctrl_can0_default: can0-default {
202 mux {
209 slew-rate = <0>;
210 io-standard = <1>;
213 conf-rx {
215 bias-high-impedance;
218 conf-tx {
220 bias-disable;
224 pinctrl_gem0_default: gem0-default {
225 mux {
232 slew-rate = <0>;
233 io-standard = <4>;
236 conf-rx {
238 bias-high-impedance;
239 low-power-disable;
242 conf-tx {
244 bias-disable;
245 low-power-enable;
248 mux-mdio {
253 conf-mdio {
255 slew-rate = <0>;
256 io-standard = <1>;
257 bias-disable;
261 pinctrl_gpio0_default: gpio0-default {
262 mux {
273 slew-rate = <0>;
274 io-standard = <1>;
277 conf-pull-up {
279 bias-pull-up;
282 conf-pull-none {
284 bias-disable;
288 pinctrl_i2c0_default: i2c0-default {
289 mux {
296 bias-pull-up;
297 slew-rate = <0>;
298 io-standard = <1>;
302 pinctrl_sdhci0_default: sdhci0-default {
303 mux {
310 slew-rate = <0>;
311 io-standard = <1>;
312 bias-disable;
315 mux-cd {
320 conf-cd {
322 bias-high-impedance;
323 bias-pull-up;
324 slew-rate = <0>;
325 io-standard = <1>;
328 mux-wp {
333 conf-wp {
335 bias-high-impedance;
336 bias-pull-up;
337 slew-rate = <0>;
338 io-standard = <1>;
342 pinctrl_uart1_default: uart1-default {
343 mux {
350 slew-rate = <0>;
351 io-standard = <1>;
354 conf-rx {
356 bias-high-impedance;
359 conf-tx {
361 bias-disable;
365 pinctrl_usb0_default: usb0-default {
366 mux {
373 slew-rate = <0>;
374 io-standard = <1>;
377 conf-rx {
379 bias-high-impedance;
382 conf-tx {
385 bias-disable;
391 u-boot,dm-pre-reloc;
396 u-boot,dm-pre-reloc;
398 pinctrl-names = "default";
399 pinctrl-0 = <&pinctrl_sdhci0_default>;
403 u-boot,dm-pre-reloc;
405 pinctrl-names = "default";
406 pinctrl-0 = <&pinctrl_uart1_default>;
412 usb-phy = <&usb_phy0>;
413 pinctrl-names = "default";
414 pinctrl-0 = <&pinctrl_usb0_default>;