arm/dts/sun7i-a20-mk808c.dts

6  * This file is dual-licensed: you can use it either under the terms
24  *     MA 02110-1301 USA
50 /dts-v1/;
51 #include "sun7i-a20.dtsi"
52 #include "sunxi-common-regulators.dtsi"
54 #include <dt-bindings/gpio/gpio.h>
55 #include <dt-bindings/interrupt-controller/irq.h>
56 #include <dt-bindings/pinctrl/sun4i-a10.h>
60 	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
68 		stdout-path = "serial0:115200n8";
72 &codec {
85 	pinctrl-names = "default";
86 	pinctrl-0 = <&i2c0_pins_a>;
90 		compatible = "x-powers,axp209";
92 		interrupt-parent = <&nmi_intc>;
94 		interrupt-controller;
95 		#interrupt-cells = <1>;
100 	pinctrl-names = "default";
101 	pinctrl-0 = <&i2c1_pins_a>;
106 	pinctrl-names = "default";
107 	pinctrl-0 = <&i2c2_pins_a>;
112 	pinctrl-names = "default";
113 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
114 	vmmc-supply = <&reg_vcc3v0>;
115 	bus-width = <4>;
116 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
117 	cd-inverted;
162 	pinctrl-names = "default";
163 	pinctrl-0 = <&uart0_pins_a>;
168 	pinctrl-names = "default";
169 	pinctrl-0 = <&uart2_pins_a>;
179 	pinctrl-names = "default";
180 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
181 	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
182 	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
183 	usb0_vbus-supply = <&reg_usb0_vbus>;
184 	usb1_vbus-supply = <&reg_usb1_vbus>;
185 	usb2_vbus-supply = <&reg_usb2_vbus>;