arm/dts/sun7i-a20-icnova-swac.dts

4  * This file is dual-licensed: you can use it either under the terms
9  *  a) This file is free software; you can redistribute it and/or
43 /dts-v1/;
44 #include "sun7i-a20.dtsi"
45 #include "sunxi-common-regulators.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/interrupt-controller/irq.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
52 	model = "ICnova-A20 SWAC";
53 	compatible = "swac,icnova-a20-swac", "incircuit,icnova-a20", "allwinner,sun7i-a20";
60 		stdout-path = "serial0:115200n8";
65 	cpu-supply = <&reg_dcdc2>;
77 	pinctrl-names = "default";
78 	pinctrl-0 = <&gmac_pins_mii_a>;
80 	phy-mode = "mii";
83 	phy1: ethernet-phy@1 {
89 	pinctrl-names = "default";
90 	pinctrl-0 = <&i2c0_pins_a>;
95 		interrupt-parent = <&nmi_intc>;
101 	pinctrl-names = "default";
102 	pinctrl-0 = <&i2c1_pins_a>;
107 	pinctrl-names = "default";
108 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
109 	vmmc-supply = <&reg_vcc3v3>;
110 	bus-width = <4>;
111 	cd-gpios = <&pio 8 5 GPIO_ACTIVE_HIGH>; /* PI5 */
112 	cd-inverted;
127 	regulator-always-on;
128 	regulator-min-microvolt = <1000000>;
129 	regulator-max-microvolt = <1400000>;
130 	regulator-name = "vdd-cpu";
134 	regulator-always-on;
135 	regulator-min-microvolt = <1000000>;
136 	regulator-max-microvolt = <1400000>;
137 	regulator-name = "vdd-int-dll";
141 	regulator-name = "vdd-rtc";
145 	regulator-always-on;
146 	regulator-min-microvolt = <3000000>;
147 	regulator-max-microvolt = <3000000>;
148 	regulator-name = "avcc";
160 	pinctrl-names = "default";
161 	pinctrl-0 = <&uart0_pins_a>;
166 	usb1_vbus-supply = <&reg_usb1_vbus>;
167 	usb2_vbus-supply = <&reg_usb2_vbus>;