arm/dts/sun7i-a20-hummingbird.dts

6  * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
51 #include <dt-bindings/pinctrl/sun4i-a10.h>
55 	compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
66 		stdout-path = "serial0:115200n8";
70 		compatible = "regulator-fixed";
71 		pinctrl-names = "default";
72 		pinctrl-0 = <&mmc3_vdd_pin_a20_hummingbird>;
73 		regulator-name = "mmc3_vdd";
74 		regulator-min-microvolt = <3000000>;
75 		regulator-max-microvolt = <3000000>;
76 		enable-active-high;
81 		compatible = "regulator-fixed";
82 		pinctrl-names = "default";
83 		pinctrl-0 = <&gmac_vdd_pin_a20_hummingbird>;
84 		regulator-name = "gmac_vdd";
85 		regulator-min-microvolt = <3000000>;
86 		regulator-max-microvolt = <3000000>;
87 		enable-active-high;
93 	target-supply = <&reg_ahci_5v>;
106 	pinctrl-names = "default";
107 	pinctrl-0 = <&gmac_pins_rgmii_a>;
109 	phy-mode = "rgmii";
110 	phy-supply = <&reg_gmac_vdd>;
112 	snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
113 	snps,reset-active-low;
115 	snps,reset-delays-us = <0 10000 1000000>;
118 	phy1: ethernet-phy@1 {
124 	pinctrl-names = "default";
125 	pinctrl-0 = <&i2c0_pins_a>;
129 		compatible = "x-powers,axp209";
131 		interrupt-parent = <&nmi_intc>;
133 		interrupt-controller;
134 		#interrupt-cells = <1>;
139 	pinctrl-names = "default";
140 	pinctrl-0 = <&i2c1_pins_a>;
145 	pinctrl-names = "default";
146 	pinctrl-0 = <&i2c2_pins_a>;
151 	pinctrl-names = "default";
152 	pinctrl-0 = <&i2c3_pins_a>;
157 	pinctrl-names = "default";
158 	pinctrl-0 = <&ir0_rx_pins_a>;
163 	pinctrl-names = "default";
164 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
165 	vmmc-supply = <&reg_vcc3v0>;
166 	bus-width = <4>;
167 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
168 	cd-inverted;
173 	pinctrl-names = "default";
174 	pinctrl-0 = <&mmc3_pins_a>;
175 	vmmc-supply = <&reg_mmc3_vdd>;
176 	bus-width = <4>;
177 	non-removable;
220 	pinctrl-names = "default";
221 	pinctrl-0 = <&pwm0_pins_a>;
226 	pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
232 	pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
242 	pinctrl-names = "default";
243 	pinctrl-0 = <&spi2_pins_b>,
249 	pinctrl-names = "default";
250 	pinctrl-0 = <&uart0_pins_a>;
255 	pinctrl-names = "default";
256 	pinctrl-0 = <&uart2_pins_a>;
261 	pinctrl-names = "default";
262 	pinctrl-0 = <&uart3_pins_a>;
267 	pinctrl-names = "default";
268 	pinctrl-0 = <&uart4_pins_a>;
273 	pinctrl-names = "default";
274 	pinctrl-0 = <&uart5_pins_a>;
279 	usb1_vbus-supply = <&reg_usb1_vbus>;
280 	usb2_vbus-supply = <&reg_usb2_vbus>;