arm/dts/sun7i-a20-cubieboard2.dts

4  * Maxime Ripard <maxime.ripard@free-electrons.com>
6  * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun7i-a20.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
51 #include <dt-bindings/pinctrl/sun4i-a10.h>
55 	compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20";
62 		stdout-path = "serial0:115200n8";
66 		compatible = "gpio-leds";
67 		pinctrl-names = "default";
68 		pinctrl-0 = <&led_pins_cubieboard2>;
83 	target-supply = <&reg_ahci_5v>;
87 &codec {
92 	cpu-supply = <&reg_dcdc2>;
104 	pinctrl-names = "default";
105 	pinctrl-0 = <&gmac_pins_mii_a>;
107 	phy-mode = "mii";
110 	phy1: ethernet-phy@1 {
116 	pinctrl-names = "default";
117 	pinctrl-0 = <&i2c0_pins_a>;
122 		interrupt-parent = <&nmi_intc>;
128 	pinctrl-names = "default";
129 	pinctrl-0 = <&i2c1_pins_a>;
134 	pinctrl-names = "default";
135 	pinctrl-0 = <&ir0_rx_pins_a>;
140 	pinctrl-names = "default";
141 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
142 	vmmc-supply = <&reg_vcc3v3>;
143 	bus-width = <4>;
144 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
145 	cd-inverted;
189 	regulator-always-on;
190 	regulator-min-microvolt = <1000000>;
191 	regulator-max-microvolt = <1450000>;
192 	regulator-name = "vdd-cpu";
196 	regulator-always-on;
197 	regulator-min-microvolt = <1000000>;
198 	regulator-max-microvolt = <1400000>;
199 	regulator-name = "vdd-int-dll";
203 	regulator-name = "vdd-rtc";
207 	regulator-always-on;
208 	regulator-min-microvolt = <3000000>;
209 	regulator-max-microvolt = <3000000>;
210 	regulator-name = "avcc";
222 	pinctrl-names = "default";
223 	pinctrl-0 = <&uart0_pins_a>;
228 	pinctrl-names = "default";
229 	pinctrl-0 = <&usb0_id_detect_pin>;
230 	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
231 	usb1_vbus-supply = <&reg_usb1_vbus>;
232 	usb2_vbus-supply = <&reg_usb2_vbus>;