arm/dts/sun5i-a13-olinuxino-micro.dts

2  * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
5  * This file is dual-licensed: you can use it either under the terms
44 /dts-v1/;
45 #include "sun5i-a13.dtsi"
46 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
52 	model = "Olimex A13-Olinuxino Micro";
53 	compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
60 		stdout-path = "serial0:115200n8";
64 		compatible = "gpio-leds";
65 		pinctrl-names = "default";
66 		pinctrl-0 = <&led_pins_olinuxinom>;
69 			label = "a13-olinuxino-micro:green:power";
71 			default-state = "on";
81 	pinctrl-names = "default";
82 	pinctrl-0 = <&i2c0_pins_a>;
87 	pinctrl-names = "default";
88 	pinctrl-0 = <&i2c1_pins_a>;
93 	pinctrl-names = "default";
94 	pinctrl-0 = <&i2c2_pins_a>;
99 	pinctrl-names = "default";
100 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
101 	vmmc-supply = <&reg_vcc3v3>;
102 	bus-width = <4>;
103 	cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
104 	cd-inverted;
161 	pinctrl-0 = <&usb0_vbus_pin_olinuxinom>;
167 	pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
173 	pinctrl-names = "default";
174 	pinctrl-0 = <&uart1_pins_b>;
184 	pinctrl-names = "default";
185 	pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
186 	usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
187 	usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
188 	usb0_vbus-supply = <&reg_usb0_vbus>;
189 	usb1_vbus-supply = <&reg_usb1_vbus>;