Lines Matching +full:sun5i +full:- +full:a13 +full:- +full:pinctrl
4 * This file is dual-licensed: you can use it either under the terms
43 /dts-v1/;
44 #include "sun5i-a13.dtsi"
45 #include "sunxi-common-regulators.dtsi"
46 #include <dt-bindings/gpio/gpio.h>
47 #include <dt-bindings/input/input.h>
48 #include <dt-bindings/interrupt-controller/irq.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
50 #include <dt-bindings/pwm/pwm.h>
54 compatible = "empire-electronix,d709", "allwinner,sun5i-a13";
61 compatible = "pwm-backlight";
63 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
64 default-brightness-level = <8>;
69 stdout-path = "serial0:115200n8";
74 cpu-supply = <®_dcdc2>;
82 pinctrl-names = "default";
83 pinctrl-0 = <&i2c0_pins_a>;
95 pinctrl-names = "default";
96 pinctrl-0 = <&i2c1_pins_a>;
106 vref-supply = <®_ldo2>;
125 pinctrl-names = "default";
126 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>;
127 vmmc-supply = <®_vcc3v3>;
128 bus-width = <4>;
129 cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
130 cd-inverted;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pwm0_pins>;
168 regulator-always-on;
169 regulator-min-microvolt = <1000000>;
170 regulator-max-microvolt = <1400000>;
171 regulator-name = "vdd-cpu";
175 regulator-always-on;
176 regulator-min-microvolt = <1250000>;
177 regulator-max-microvolt = <1250000>;
178 regulator-name = "vdd-int-pll";
182 regulator-name = "vdd-rtc";
186 regulator-always-on;
187 regulator-min-microvolt = <3000000>;
188 regulator-max-microvolt = <3000000>;
189 regulator-name = "avcc";
193 regulator-min-microvolt = <3300000>;
194 regulator-max-microvolt = <3300000>;
195 regulator-name = "vcc-wifi";
204 pinctrl-names = "default";
205 pinctrl-0 = <&uart1_pins_b>;
219 pinctrl-names = "default";
220 pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
221 usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */
222 usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
223 usb0_vbus-supply = <®_usb0_vbus>;
224 usb1_vbus-supply = <®_ldo3>;