arm/dts/sun4i-a10-marsboard.dts

5  * This file is dual-licensed: you can use it either under the terms
10  *  a) This file is free software; you can redistribute it and/or
44 /dts-v1/;
45 #include "sun4i-a10.dtsi"
46 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
52 	model = "HAOYU Electronics Marsboard A10";
53 	compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
60 		stdout-path = "serial0:115200n8";
64 		compatible = "gpio-leds";
65 		pinctrl-names = "default";
66 		pinctrl-0 = <&led_pins_marsboard>;
111 	pinctrl-names = "default";
112 	pinctrl-0 = <&emac_pins_a>;
118 	pinctrl-names = "default";
119 	pinctrl-0 = <&i2c0_pins_a>;
124 	pinctrl-names = "default";
125 	pinctrl-0 = <&i2c1_pins_a>;
130 	pinctrl-names = "default";
131 	pinctrl-0 = <&i2c2_pins_a>;
138 	phy1: ethernet-phy@1 {
144 	pinctrl-names = "default";
145 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
146 	vmmc-supply = <&reg_vcc3v3>;
147 	bus-width = <4>;
148 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
149 	cd-inverted;
190 	pinctrl-names = "default";
191 	pinctrl-0 = <&spi0_pins_a>,
197 	pinctrl-names = "default";
198 	pinctrl-0 = <&uart0_pins_a>;
208 	pinctrl-names = "default";
209 	pinctrl-0 = <&usb0_id_detect_pin>;
210 	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
211 	usb1_vbus-supply = <&reg_usb1_vbus>;
212 	usb2_vbus-supply = <&reg_usb2_vbus>;