arm/dts/sun4i-a10-hackberry.dts

4  * Maxime Ripard <maxime.ripard@free-electrons.com>
6  * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun4i-a10.dtsi"
47 #include "sunxi-common-regulators.dtsi"
49 #include <dt-bindings/gpio/gpio.h>
50 #include <dt-bindings/pinctrl/sun4i-a10.h>
54 	compatible = "miniand,hackberry", "allwinner,sun4i-a10";
61 		stdout-path = "serial0:115200n8";
64 	reg_emac_3v3: emac-3v3 {
65 		compatible = "regulator-fixed";
66 		regulator-name = "emac-3v3";
67 		regulator-min-microvolt = <3300000>;
68 		regulator-max-microvolt = <3300000>;
69 		startup-delay-us = <20000>;
70 		enable-active-high;
83 &emac {
84 	pinctrl-names = "default";
85 	pinctrl-0 = <&emac_pins_a>;
95 	pinctrl-names = "default";
96 	pinctrl-0 = <&ir0_rx_pins_a>;
101 	phy-supply = <&reg_emac_3v3>;
104 	phy0: ethernet-phy@0 {
110 	pinctrl-names = "default";
111 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
112 	vmmc-supply = <&reg_vcc3v3>;
113 	bus-width = <4>;
114 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
115 	cd-inverted;
128 	pinctrl-names = "default";
129 	pinctrl-0 = <&hackberry_hogs>;
151 	pinctrl-0 = <&usb2_vbus_pin_hackberry>;
157 	usb1_vbus-supply = <&reg_usb1_vbus>;
158 	usb2_vbus-supply = <&reg_usb2_vbus>;
163 	pinctrl-names = "default";
164 	pinctrl-0 = <&uart0_pins_a>;