arm/dts/sun4i-a10-gemei-g9.dts

6  * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "sun4i-a10.dtsi"
47 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/input/input.h>
50 #include <dt-bindings/interrupt-controller/irq.h>
54 	compatible = "gemei,g9", "allwinner,sun4i-a10";
61 		stdout-path = "serial0:115200n8";
71  *   Touchscreen - gt801_2plus1 @ i2c adapter 2 @ 0x48
75 	pinctrl-names = "default";
76 	pinctrl-0 = <&codec_pa_pin>;
77 	allwinner,pa-gpios = <&pio 7 15 GPIO_ACTIVE_HIGH>;
82 	cpu-supply = <&reg_dcdc2>;
94 	pinctrl-names = "default";
95 	pinctrl-0 = <&i2c0_pins_a>;
107 	pinctrl-names = "default";
108 	pinctrl-0 = <&i2c1_pins_a>;
115 		interrupt-parent = <&pio>;
121 	vref-supply = <&reg_ldo2>;
148 	pinctrl-names = "default";
149 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
150 	vmmc-supply = <&reg_vcc3v3>;
151 	bus-width = <4>;
152 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH01 */
153 	cd-inverted;
167 	regulator-always-on;
168 	regulator-min-microvolt = <1000000>;
169 	regulator-max-microvolt = <1400000>;
170 	regulator-name = "vdd-cpu";
174 	regulator-always-on;
175 	regulator-min-microvolt = <1250000>;
176 	regulator-max-microvolt = <1250000>;
177 	regulator-name = "vdd-int-dll";
181 	regulator-name = "vdd-rtc";
185 	regulator-always-on;
186 	regulator-min-microvolt = <3000000>;
187 	regulator-max-microvolt = <3000000>;
188 	regulator-name = "avcc";
201 	pinctrl-names = "default";
202 	pinctrl-0 = <&uart0_pins_a>;
207 	usb1_vbus-supply = <&reg_usb1_vbus>;
208 	usb2_vbus-supply = <&reg_usb2_vbus>;