arm/dts/sun4i-a10-cubieboard.dts

5  * This file is dual-licensed: you can use it either under the terms
10  *  a) This file is free software; you can redistribute it and/or
44 /dts-v1/;
45 #include "sun4i-a10.dtsi"
46 #include "sunxi-common-regulators.dtsi"
48 #include <dt-bindings/gpio/gpio.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
53 	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
60 		stdout-path = "serial0:115200n8";
64 		compatible = "gpio-leds";
65 		pinctrl-names = "default";
66 		pinctrl-0 = <&led_pins_cubieboard>;
76 			linux,default-trigger = "heartbeat";
82 	target-supply = <&reg_ahci_5v>;
91 	cpu-supply = <&reg_dcdc2>;
103 	pinctrl-names = "default";
104 	pinctrl-0 = <&emac_pins_a>;
114 	pinctrl-names = "default";
115 	pinctrl-0 = <&i2c0_pins_a>;
125 	pinctrl-names = "default";
126 	pinctrl-0 = <&i2c1_pins_a>;
131 	pinctrl-names = "default";
132 	pinctrl-0 = <&ir0_rx_pins_a>;
139 	phy1: ethernet-phy@1 {
145 	pinctrl-names = "default";
146 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
147 	vmmc-supply = <&reg_vcc3v3>;
148 	bus-width = <4>;
149 	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
150 	cd-inverted;
189 	regulator-always-on;
190 	regulator-min-microvolt = <1000000>;
191 	regulator-max-microvolt = <1450000>;
192 	regulator-name = "vdd-cpu";
196 	regulator-always-on;
197 	regulator-min-microvolt = <1000000>;
198 	regulator-max-microvolt = <1400000>;
199 	regulator-name = "vdd-int-dll";
203 	regulator-name = "vdd-rtc";
207 	regulator-always-on;
208 	regulator-min-microvolt = <3000000>;
209 	regulator-max-microvolt = <3000000>;
210 	regulator-name = "avcc";
222 	pinctrl-names = "default";
223 	pinctrl-0 = <&spi0_pins_a>,
229 	pinctrl-names = "default";
230 	pinctrl-0 = <&uart0_pins_a>;
240 	pinctrl-names = "default";
241 	pinctrl-0 = <&usb0_id_detect_pin>;
242 	usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
243 	usb1_vbus-supply = <&reg_usb1_vbus>;
244 	usb2_vbus-supply = <&reg_usb2_vbus>;