arm/dts/rk3288-veyron-mickey.dts

6  * This file is dual-licensed: you can use it either under the terms
45 /dts-v1/;
46 #include "rk3288-veyron-chromebook.dtsi"
50 	compatible = "google,veyron-mickey-rev8", "google,veyron-mickey-rev7",
51 		     "google,veyron-mickey-rev6", "google,veyron-mickey-rev5",
52 		     "google,veyron-mickey-rev4", "google,veyron-mickey-rev3",
53 		     "google,veyron-mickey-rev2", "google,veyron-mickey-rev1",
54 		     "google,veyron-mickey-rev0", "google,veyron-mickey",
57 	vcc_5v: vcc-5v {
58 		vin-supply = <&vcc33_sys>;
62 		compatible = "regulator-fixed";
63 		regulator-name = "vcc33_io";
64 		regulator-always-on;
65 		regulator-boot-on;
66 		vin-supply = <&vcc33_sys>;
71 	/delete-node/ trips;
72 	/delete-node/ cooling-maps;
112 	cooling-maps {
117 		 * heat--we'll let the GPU do the rest itself.
121 			cooling-device =
127 		 * with the fact that there are two passive cooling devices:
130 		 * - 1.2 GHz - 1.0 GHz (almost hot)
131 		 * - 800 MHz           (hot)
132 		 * - 800 MHz - 696 MHz (hotter)
133 		 * - 696 MHz - min     (very hot)
136 		 * - 800 MHz appears to be a "sweet spot" for me.  I can run
138 		 * - After 696 MHz we stop lowering voltage, so throttling
143 			cooling-device =
148 			cooling-device =
153 			cooling-device =
158 			cooling-device =
165 	rockchip,pctl-timing = <0x215 0xc8 0x0 0x35 0x26 0x2 0x70 0x2000d
170 	rockchip,phy-timing = <0x48d7dd93 0x187008d8 0x121076
172 	rockchip,sdram-params = <0x20d266a4 0x5b6 2 533000000 6 9 1>;
176 	/delete-property/mmc-hs200-1_8v;
189 	clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out";
194 	pinctrl-names = "default";
195 	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
196 	dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>,
199 	/delete-property/ vcc6-supply;
200 	/delete-property/ vcc12-supply;
202 	vcc11-supply = <&vcc33_sys>;
206 		/delete-node/ LDO_REG1;
207 		/delete-node/ LDO_REG7;
211 			regulator-always-on;
212 			regulator-boot-on;
213 			regulator-min-microvolt = <1000000>;
214 			regulator-max-microvolt = <1000000>;
215 			regulator-name = "vdd10_lcd";
216 			regulator-suspend-mem-disabled;
220 			regulator-always-on;
221 			regulator-boot-on;
222 			regulator-min-microvolt = <1800000>;
223 			regulator-max-microvolt = <1800000>;
224 			regulator-name = "vcc18_lcd";
225 			regulator-suspend-mem-disabled;
232 		power_hdmi_on: power-hdmi-on {
238 		dvs_1: dvs-1 {
242 		dvs_2: dvs-2 {
273 	enable-active-high;
275 	pinctrl-names = "default";
276 	pinctrl-0 = <&power_hdmi_on>;