arm/dts/meson-gxbb.dtsi

4  * This file is dual-licensed: you can use it either under the terms
43 #include "meson-gx.dtsi"
44 #include <dt-bindings/gpio/meson-gxbb-gpio.h>
45 #include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
46 #include <dt-bindings/clock/gxbb-clkc.h>
47 #include <dt-bindings/clock/gxbb-aoclkc.h>
48 #include <dt-bindings/reset/gxbb-aoclkc.h>
51 	compatible = "amlogic,meson-gxbb";
55 			compatible = "amlogic,meson-gxbb-usb2-phy";
56 			#phy-cells = <0>;
58 			resets = <&reset RESET_USB_OTG>;
60 			clock-names = "usb_general", "usb";
65 			compatible = "amlogic,meson-gxbb-usb2-phy";
66 			#phy-cells = <0>;
68 			resets = <&reset RESET_USB_OTG>;
70 			clock-names = "usb_general", "usb";
75 			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
79 			clock-names = "otg";
81 			phy-names = "usb2-phy";
87 			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
91 			clock-names = "otg";
93 			phy-names = "usb2-phy";
104 	clock-names = "stmmaceth", "clkin0", "clkin1";
109 		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
110 		#address-cells = <2>;
111 		#size-cells = <2>;
118 			reg-names = "mux", "pull", "gpio";
119 			gpio-controller;
120 			#gpio-cells = <2>;
121 			gpio-ranges = <&pinctrl_aobus 0 0 14>;
257 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
258 		#address-cells = <2>;
259 		#size-cells = <2>;
267 			reg-names = "mux", "pull", "pull-enable", "gpio";
268 			gpio-controller;
269 			#gpio-cells = <2>;
270 			gpio-ranges = <&pinctrl_periphs 0 14 120>;
396 		eth_rgmii_pins: eth-rgmii {
416 		eth_rmii_pins: eth-rmii {
525 	clkc: clock-controller@0 {
526 		compatible = "amlogic,gxbb-clkc";
527 		#clock-cells = <1>;
534 		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
546 		interrupt-names = "gp", "gpmmu", "pp", "pmu",
550 		clock-names = "bus", "core";
557 		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
560 		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
563 		assigned-clock-rates = <0>, /* Do Nothing */
586 	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
592 	clock-names = "clkin", "core", "sana", "adc_clk", "adc_sel";
599 	clock-names = "core", "clkin0", "clkin1";
606 	clock-names = "core", "clkin0", "clkin1";
613 	clock-names = "core", "clkin0", "clkin1";
621 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
626 	clock-names = "core";
630 	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
631 	resets = <&reset RESET_HDMITX_CAPB3>,
632 		 <&reset RESET_HDMI_SYSTEM_RESET>,
633 		 <&reset RESET_HDMI_TX>;
634 	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
638 	clock-names = "isfr", "iahb", "venci";