arm/dts/logicpd-som-lv-37xx-devkit.dts

7 /dts-v1/;
10 #include "logicpd-som-lv.dtsi"
11 #include "omap-gpmc-smsc9221.dtsi"
14 	model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
15 	compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
18 		stdout-path = &uart1;
22 		compatible = "gpio-keys";
23 		pinctrl-names = "default";
24 		pinctrl-0 = <&gpio_key_pins>;
30 			wakeup-source;
35 		compatible = "ti,omap-twl4030";
41 		compatible = "gpio-leds";
42 		pinctrl-names = "default";
43 		pinctrl-0 = <&led_pins &led_pins_wkup>;
48 			linux,default-trigger = "cpu0";
54 			linux,default-trigger = "none";
60 	regulator-min-microvolt = <3000000>;
61 	regulator-max-microvolt = <3000000>;
65 	regulator-min-microvolt = <1800000>;
66 	regulator-max-microvolt = <1800000>;
74 	ti,bb-uvolt = <3200000>;
75 	ti,bb-uamp = <150>;
82 		pinctrl-names = "default";
83 		pinctrl-0 = <&lan9221_pins>;
84 		interrupt-parent = <&gpio5>;
91 	regulator-always-on;
96 	vdds_dsi-supply = <&vpll2>;
97 	vdda_video-supply = <&video_reg>;
98 	pinctrl-names = "default";
99 	pinctrl-0 = <&dss_dpi_pins1>;
102 			remote-endpoint = <&lcd_in>;
103 			data-lines = <16>;
114 		compatible = "regulator-fixed";
115 		regulator-name = "fixed-supply";
116 		regulator-min-microvolt = <3300000>;
117 		regulator-max-microvolt = <3300000>;
121 		compatible = "panel-dpi";
124 		/* default-on; */
125 		pinctrl-names = "default";
126 		pinctrl-0 = <&lcd_enable_pin>;
127 		enable-gpios = <&gpio5 27 GPIO_ACTIVE_HIGH>;	/* gpio155, lcd INI */
130 				remote-endpoint = <&dpi_out>;
134 		panel-timing {
135 			clock-frequency = <9000000>;
138 			hfront-porch = <3>;
139 			hback-porch = <2>;
140 			hsync-len = <42>;
141 			vback-porch = <3>;
142 			vfront-porch = <2>;
143 			vsync-len = <11>;
144 			hsync-active = <1>;
145 			vsync-active = <1>;
146 			de-active = <1>;
147 			pixelclk-active = <0>;
152 		compatible = "pwm-backlight";
153 		pinctrl-names = "default";
154 		pinctrl-0 = <&backlight_pins>;
156 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
157 		default-brightness-level = <7>;
158 		enable-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; /* gpio_8 */
163 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
164 	pinctrl-names = "default";
165 	pinctrl-0 = <&mmc1_pins>;
166 	vmmc-supply = <&vmmc1>;
167 	bus-width = <4>;
168 	cap-power-off-card;
177 		pinctrl-single,pins = <
183 		pinctrl-single,pins = <
189 		pinctrl-single,pins = <
195 		pinctrl-single,pins = <
208 		pinctrl-single,pins = <
214 		pinctrl-single,pins = <
242 		pinctrl-single,pins = <
248 		pinctrl-single,pins = <
256 	interrupts-extended = <&intc 72 &omap3_pmx_core OMAP3_UART1_RX>;
261 	pinctrl-names = "default";
262 	pinctrl-0 = <&hsusb_otg_pins>;
263 	interface-type = <0>;
264 	usb-phy = <&usb2_phy>;
266 	phy-names = "usb2-phy";