arm/dts/imx7d-sdb.dts

4  * SPDX-License-Identifier:	GPL-2.0+
7 /dts-v1/;
9 #include "imx7d.dtsi"
13 	compatible = "fsl,imx7d-sdb", "fsl,imx7d";
20 		compatible = "spi-gpio";
21 		pinctrl-names = "default";
22 		pinctrl-0 = <&pinctrl_spi1>;
24 		gpio-sck = <&gpio1 13 0>;
25 		gpio-mosi = <&gpio1 9 0>;
26 		cs-gpios = <&gpio1 12 0>;
27 		num-chipselects = <1>;
28 		#address-cells = <1>;
29 		#size-cells = <0>;
33 			gpio-controller;
34 			#gpio-cells = <2>;
36 			registers-number = <1>;
37 			registers-default = /bits/ 8 <0x74>; /* Enable PERI_3V3, SENSOR_RST_B and HDMI_RST*/
38 			spi-max-frequency = <100000>;
43 		compatible = "simple-bus";
44 		#address-cells = <1>;
45 		#size-cells = <0>;
48 			compatible = "regulator-fixed";
50 			regulator-name = "usb_otg1_vbus";
51 			regulator-min-microvolt = <5000000>;
52 			regulator-max-microvolt = <5000000>;
54 			enable-active-high;
58 			compatible = "regulator-fixed";
60 			regulator-name = "usb_otg2_vbus";
61 			regulator-min-microvolt = <5000000>;
62 			regulator-max-microvolt = <5000000>;
64 			enable-active-high;
68 			compatible = "regulator-fixed";
69 			regulator-name = "VDD_SD1";
70 			regulator-min-microvolt = <3300000>;
71 			regulator-max-microvolt = <3300000>;
73 			startup-delay-us = <200000>;
74 			enable-active-high;
80 	imx7d-sdb {
169 	clock-frequency = <100000>;
170 	pinctrl-names = "default";
171 	pinctrl-0 = <&pinctrl_i2c1>;
180 				regulator-min-microvolt = <700000>;
181 				regulator-max-microvolt = <3300000>;
182 				regulator-boot-on;
183 				regulator-always-on;
184 				regulator-ramp-delay = <6250>;
189 				regulator-min-microvolt = <700000>;
190 				regulator-max-microvolt = <1475000>;
191 				regulator-boot-on;
192 				regulator-always-on;
193 				regulator-ramp-delay = <6250>;
197 				regulator-min-microvolt = <1500000>;
198 				regulator-max-microvolt = <1850000>;
199 				regulator-boot-on;
200 				regulator-always-on;
204 				regulator-min-microvolt = <900000>;
205 				regulator-max-microvolt = <1650000>;
206 				regulator-boot-on;
207 				regulator-always-on;
211 				regulator-min-microvolt = <5000000>;
212 				regulator-max-microvolt = <5150000>;
216 				regulator-min-microvolt = <1000000>;
217 				regulator-max-microvolt = <3000000>;
218 				regulator-boot-on;
219 				regulator-always-on;
223 				regulator-boot-on;
224 				regulator-always-on;
228 				regulator-min-microvolt = <1800000>;
229 				regulator-max-microvolt = <3300000>;
230 				regulator-always-on;
234 				regulator-min-microvolt = <800000>;
235 				regulator-max-microvolt = <1550000>;
236 				regulator-always-on;
240 				regulator-min-microvolt = <2850000>;
241 				regulator-max-microvolt = <3300000>;
242 				regulator-always-on;
246 				regulator-min-microvolt = <2850000>;
247 				regulator-max-microvolt = <3300000>;
248 				regulator-always-on;
252 				regulator-min-microvolt = <1800000>;
253 				regulator-max-microvolt = <3300000>;
254 				regulator-always-on;
258 				regulator-min-microvolt = <1800000>;
259 				regulator-max-microvolt = <3300000>;
260 				regulator-always-on;
267 	clock-frequency = <100000>;
268 	pinctrl-names = "default";
269 	pinctrl-0 = <&pinctrl_i2c2>;
274 	clock-frequency = <100000>;
275 	pinctrl-names = "default";
276 	pinctrl-0 = <&pinctrl_i2c3>;
281 	clock-frequency = <100000>;
282 	pinctrl-names = "default";
283 	pinctrl-0 = <&pinctrl_i2c4>;
288 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
289 	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
290 	cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
291 	wp-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
292 	vmmc-supply = <&reg_sd1_vmmc>;
297 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
298 	pinctrl-0 = <&pinctrl_usdhc2>;
299 	non-removable;
304 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
305 	pinctrl-0 = <&pinctrl_usdhc3>;
306 	bus-width = <8>;
307 	non-removable;