Lines Matching +full:wp +full:- +full:controller
9 /dts-v1/;
15 compatible = "fsl,imx6sx-sabreauto", "fsl,imx6sx";
22 compatible = "simple-bus";
23 #address-cells = <1>;
24 #size-cells = <0>;
27 compatible = "regulator-fixed";
29 pinctrl-names = "default";
30 pinctrl-0 = <&pinctrl_vcc_sd3>;
31 regulator-name = "VCC_SD3";
32 regulator-min-microvolt = <3000000>;
33 regulator-max-microvolt = <3000000>;
35 enable-active-high;
41 pinctrl-names = "default";
42 pinctrl-0 = <&pinctrl_uart1>;
47 pinctrl-names = "default", "state_100mhz", "state_200mhz";
48 pinctrl-0 = <&pinctrl_usdhc3>;
49 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
50 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
51 bus-width = <8>;
52 cd-gpios = <&gpio7 10 GPIO_ACTIVE_LOW>;
53 wp-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
54 keep-power-in-suspend;
55 wakeup-source;
56 vmmc-supply = <&vcc_sd3>;
61 pinctrl-names = "default";
62 pinctrl-0 = <&pinctrl_usdhc4>;
63 bus-width = <8>;
64 cd-gpios = <&gpio7 11 GPIO_ACTIVE_LOW>;
65 no-1-8-v;
66 keep-power-in-suspend;
67 wakeup-source;
72 clock-frequency = <100000>;
73 pinctrl-names = "default";
74 pinctrl-0 = <&pinctrl_i2c2_1>;
79 clock-frequency = <100000>;
80 pinctrl-names = "default";
81 pinctrl-0 = <&pinctrl_i2c3_2>;
87 gpio-controller;
88 #gpio-cells = <2>;
94 gpio-controller;
95 #gpio-cells = <2>;
100 imx6x-sabreauto {
101 pinctrl_i2c2_1: i2c2grp-1 {
108 pinctrl_i2c3_2: i2c3grp-2 {
135 MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
139 pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
154 pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
178 MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */