arm/dts/imx6qdl-logicpd.dtsi

3  * This file is adapted from imx6qdl-sabresd.dtsi.
11  * http://www.opensource.org/licenses/gpl-license.html
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-bindings/input/input.h>
21 		stdout-path = &uart1;
32 	vin-supply = <&sw1a_reg>;
37 	vin-supply = <&sw1c_reg>;
41 	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
43 	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
48 	clock-frequency = <100000>;
49 	pinctrl-names = "default";
50 	pinctrl-0 = <&pinctrl_i2c3>;
53 	pmic: pfuze100@08 {
54 		compatible = "fsl,pfuze100";
59 				regulator-min-microvolt = <725000>;
60 				regulator-max-microvolt = <1450000>;
61 				regulator-name = "vddcore";
62 				regulator-boot-on;
63 				regulator-always-on;
64 				regulator-ramp-delay = <6250>;
68 				regulator-min-microvolt = <725000>;
69 				regulator-max-microvolt = <1450000>;
70 				regulator-name = "vddsoc";
71 				regulator-boot-on;
72 				regulator-always-on;
73 				regulator-ramp-delay = <6250>;
77 				regulator-min-microvolt = <3300000>;
78 				regulator-max-microvolt = <3300000>;
79 				regulator-name = "gen_3v3";
80 				regulator-boot-on;
81 				regulator-always-on;
85 				regulator-min-microvolt = <400000>;
86 				regulator-max-microvolt = <1975000>;
87 				regulator-name = "sw3a_vddr";
88 				regulator-boot-on;
89 				regulator-always-on;
93 				regulator-min-microvolt = <400000>;
94 				regulator-max-microvolt = <1975000>;
95 				regulator-name = "sw3b_vddr";
96 				regulator-boot-on;
97 				regulator-always-on;
101 				regulator-min-microvolt = <800000>;
102 				regulator-max-microvolt = <3300000>;
103 				regulator-name = "gen_rgmii";
108 				regulator-min-microvolt = <5000000>;
109 				regulator-max-microvolt = <5150000>;
110 				regulator-name = "gen_5v0";
114 				regulator-min-microvolt = <1000000>;
115 				regulator-max-microvolt = <3000000>;
116 				regulator-name = "gen_vsns";
117 				regulator-boot-on;
118 				regulator-always-on;
122 				regulator-boot-on;
123 				regulator-always-on;
127 				regulator-min-microvolt = <1500000>;
128 				regulator-max-microvolt = <1500000>;
129 				regulator-name = "gen_1v5";
133 				regulator-name = "vgen2";
134 				regulator-min-microvolt = <800000>;
135 				regulator-max-microvolt = <1550000>;
139 				regulator-name = "gen_vadj_0";
140 				regulator-min-microvolt = <3000000>;
141 				regulator-max-microvolt = <3000000>;
145 				regulator-name = "gen_1v8";
146 				regulator-min-microvolt = <1800000>;
147 				regulator-max-microvolt = <1800000>;
148 				regulator-always-on;
152 				regulator-name = "gen_adj_1";
153 				regulator-min-microvolt = <3300000>;
154 				regulator-max-microvolt = <3300000>;
155 				regulator-always-on;
159 				regulator-name = "gen_2v5";
160 				regulator-min-microvolt = <2500000>;
161 				regulator-max-microvolt = <2500000>;
162 				regulator-always-on;
170 		read-only;
182 	pinctrl-names = "default";
183 	pinctrl-0 = <&pinctrl_hog>;
325 	pinctrl-names = "default";
326 	pinctrl-0 = <&pinctrl_uart1>;
331 	pinctrl-names = "default";
332 	pinctrl-0 = <&pinctrl_uart2>;
337 	pinctrl-names = "default";
338 	pinctrl-0 = <&pinctrl_usdhc1>;
339 	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
340 	keep-power-in-suspend;
341 	enable-sdio-wakeup;
346 	pinctrl-names = "default";
347 	pinctrl-0 = <&pinctrl_usdhc3>;
348 	non-removable;
349 	keep-power-in-suspend;
350 	enable-sdio-wakeup;
351 	vmmc-supply = <&sw2_reg>;
353 	#address-cells = <1>;
354 	#size-cells = <0>;
358 		  interrupt-parent = <&gpio7>;