Lines Matching +full:1 +full:c60000
21 i2c0 = "/i2c@12C60000";
58 google,board-rev-gpios = <&gpy4 0 0>, <&gpy4 1 0>,
72 samsung,timing = <1 3 3>;
90 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
142 samsung,interface-mode = <1>;
143 samsung,dp-enabled = <1>;
159 samsung,color-depth = <1>;
166 default-brightness-level = <1>;
196 <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
225 #clock-cells = <1>;
257 regulator-name = "P1.1V_LDO_OUT7";
341 op_mode = <1>;
385 op_mode = <1>;
414 samsung,color-depth = <1>;
416 samsung,lane-count = <1>;
462 #address-cells = <1>;
535 reset-gpios = <&gpc3 1 GPIO_ACTIVE_LOW>;
541 * SW setting: [1:0] SW output 1.2V voltage is
545 /* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */
550 * measure for fine tune b00: 1us,
561 0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */
565 * [5:2]NOF=64LSB [1:0]DCO scale is 2/5
585 /* Counter number add 1ms counter delay */
623 /* Set SSC enabled and +/-1% central spreading */
635 port@1 {