Lines Matching +full:sda +full:- +full:open +full:- +full:drain
2 * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
4 * Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
10 #include <dt-bindings/pinctrl/at91.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/clock/at91.h>
18 interrupt-parent = <&aic>;
37 #address-cells = <0>;
38 #size-cells = <0>;
41 compatible = "arm,arm926ej-s";
52 compatible = "fixed-clock";
53 #clock-cells = <0>;
54 clock-frequency = <0>;
58 compatible = "fixed-clock";
59 #clock-cells = <0>;
60 clock-frequency = <0>;
65 compatible = "mmio-sram";
70 compatible = "simple-bus";
71 #address-cells = <1>;
72 #size-cells = <1>;
74 u-boot,dm-pre-reloc;
77 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
81 clock-names = "ohci_clk", "hclk", "uhpck";
86 compatible = "atmel,at91sam9261-lcdc";
89 pinctrl-names = "default";
90 pinctrl-0 = <&pinctrl_fb>;
92 clock-names = "lcdc_clk", "hclk";
97 compatible = "atmel,at91rm9200-nand";
98 #address-cells = <1>;
99 #size-cells = <1>;
101 atmel,nand-addr-offset = <22>;
102 atmel,nand-cmd-offset = <21>;
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_nand>;
113 compatible = "simple-bus";
114 #address-cells = <1>;
115 #size-cells = <1>;
117 u-boot,dm-pre-reloc;
120 compatible = "atmel,at91rm9200-tcb";
126 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
130 compatible = "atmel,at91sam9261-udc";
134 clock-names = "pclk", "hclk";
143 pinctrl-names = "default";
144 pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
145 #address-cells = <1>;
146 #size-cells = <0>;
148 clock-names = "mci_clk";
153 compatible = "atmel,at91sam9261-i2c";
154 pinctrl-names = "default";
155 pinctrl-0 = <&pinctrl_i2c_twi>;
158 #address-cells = <1>;
159 #size-cells = <0>;
165 compatible = "atmel,at91sam9260-usart";
168 atmel,use-dma-rx;
169 atmel,use-dma-tx;
170 pinctrl-names = "default";
171 pinctrl-0 = <&pinctrl_usart0>;
173 clock-names = "usart";
178 compatible = "atmel,at91sam9260-usart";
181 atmel,use-dma-rx;
182 atmel,use-dma-tx;
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_usart1>;
186 clock-names = "usart";
191 compatible = "atmel,at91sam9260-usart";
194 atmel,use-dma-rx;
195 atmel,use-dma-tx;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_usart2>;
199 clock-names = "usart";
204 compatible = "atmel,at91rm9200-ssc";
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
210 clock-names = "pclk";
215 compatible = "atmel,at91rm9200-ssc";
218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
221 clock-names = "pclk";
226 compatible = "atmel,at91rm9200-ssc";
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
232 clock-names = "pclk";
237 #address-cells = <1>;
238 #size-cells = <0>;
239 compatible = "atmel,at91rm9200-spi";
241 cs-gpios = <0>, <0>, <0>, <0>;
243 pinctrl-names = "default";
244 pinctrl-0 = <&pinctrl_spi0>;
246 clock-names = "spi_clk";
251 #address-cells = <1>;
252 #size-cells = <0>;
253 compatible = "atmel,at91rm9200-spi";
256 pinctrl-names = "default";
257 pinctrl-0 = <&pinctrl_spi1>;
259 clock-names = "spi_clk";
264 compatible = "atmel,at91sam9260-sdramc";
269 compatible = "atmel,at91sam9260-bus-matrix", "syscon";
273 aic: interrupt-controller@fffff000 {
274 #interrupt-cells = <3>;
275 compatible = "atmel,at91rm9200-aic";
276 interrupt-controller;
278 atmel,external-irqs = <29 30 31>;
282 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
285 pinctrl-names = "default";
286 pinctrl-0 = <&pinctrl_dbgu>;
288 clock-names = "usart";
293 compatible = "atmel,at91rm9200-gpio";
296 #gpio-cells = <2>;
297 gpio-controller;
298 interrupt-controller;
299 #interrupt-cells = <2>;
301 u-boot,dm-pre-reloc;
305 compatible = "atmel,at91rm9200-gpio";
308 #gpio-cells = <2>;
309 gpio-controller;
310 interrupt-controller;
311 #interrupt-cells = <2>;
313 u-boot,dm-pre-reloc;
317 compatible = "atmel,at91rm9200-gpio";
320 #gpio-cells = <2>;
321 gpio-controller;
322 interrupt-controller;
323 #interrupt-cells = <2>;
325 u-boot,dm-pre-reloc;
329 #address-cells = <1>;
330 #size-cells = <1>;
331 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
337 atmel,mux-mask =
342 u-boot,dm-pre-reloc;
346 u-boot,dm-pre-reloc;
347 pinctrl_dbgu: dbgu-0 {
355 pinctrl_usart0: usart0-0 {
361 pinctrl_usart0_rts: usart0_rts-0 {
366 pinctrl_usart0_cts: usart0_cts-0 {
373 pinctrl_usart1: usart1-0 {
379 pinctrl_usart1_rts: usart1_rts-0 {
384 pinctrl_usart1_cts: usart1_cts-0 {
391 pinctrl_usart2: usart2-0 {
397 pinctrl_usart2_rts: usart2_rts-0 {
402 pinctrl_usart2_cts: usart2_cts-0 {
409 pinctrl_nand: nand-0 {
417 pinctrl_mmc0_clk: mmc0_clk-0 {
422 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
428 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
437 pinctrl_ssc0_tx: ssc0_tx-0 {
444 pinctrl_ssc0_rx: ssc0_rx-0 {
453 pinctrl_ssc1_tx: ssc1_tx-0 {
460 pinctrl_ssc1_rx: ssc1_rx-0 {
469 pinctrl_ssc2_tx: ssc2_tx-0 {
476 pinctrl_ssc2_rx: ssc2_rx-0 {
485 pinctrl_spi0: spi0-0 {
494 pinctrl_spi1: spi1-0 {
503 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
507 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
511 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
515 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
519 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
523 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
527 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
531 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
535 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
541 pinctrl_i2c_bitbang: i2c-0-bitbang {
546 pinctrl_i2c_twi: i2c-0-twi {
554 pinctrl_fb: fb-0 {
582 compatible = "atmel,at91rm9200-pmc", "syscon";
585 interrupt-controller;
586 #address-cells = <1>;
587 #size-cells = <0>;
588 #interrupt-cells = <1>;
589 u-boot,dm-pre-reloc;
592 compatible = "atmel,at91rm9200-clk-main-osc";
593 #clock-cells = <0>;
594 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
599 compatible = "atmel,at91rm9200-clk-main";
600 #clock-cells = <0>;
605 compatible = "atmel,at91rm9200-clk-pll";
606 #clock-cells = <0>;
607 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
610 atmel,clk-input-range = <1000000 32000000>;
611 #atmel,pll-clk-output-range-cells = <4>;
612 atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
617 compatible = "atmel,at91rm9200-clk-pll";
618 #clock-cells = <0>;
619 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
622 atmel,clk-input-range = <1000000 5000000>;
623 #atmel,pll-clk-output-range-cells = <4>;
624 atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
628 compatible = "atmel,at91rm9200-clk-master";
629 #clock-cells = <0>;
630 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
632 atmel,clk-output-range = <0 94000000>;
633 atmel,clk-divisors = <1 2 4 0>;
634 u-boot,dm-pre-reloc;
638 compatible = "atmel,at91rm9200-clk-usb";
639 #clock-cells = <0>;
640 atmel,clk-divisors = <1 2 4 0>;
645 compatible = "atmel,at91rm9200-clk-programmable";
646 #address-cells = <1>;
647 #size-cells = <0>;
648 interrupt-parent = <&pmc>;
652 #clock-cells = <0>;
658 #clock-cells = <0>;
664 #clock-cells = <0>;
670 #clock-cells = <0>;
677 compatible = "atmel,at91rm9200-clk-system";
678 #address-cells = <1>;
679 #size-cells = <0>;
682 #clock-cells = <0>;
688 #clock-cells = <0>;
694 #clock-cells = <0>;
700 #clock-cells = <0>;
706 #clock-cells = <0>;
712 #clock-cells = <0>;
718 #clock-cells = <0>;
724 #clock-cells = <0>;
731 compatible = "atmel,at91rm9200-clk-peripheral";
732 #address-cells = <1>;
733 #size-cells = <0>;
735 u-boot,dm-pre-reloc;
738 #clock-cells = <0>;
740 u-boot,dm-pre-reloc;
744 #clock-cells = <0>;
746 u-boot,dm-pre-reloc;
750 #clock-cells = <0>;
752 u-boot,dm-pre-reloc;
756 #clock-cells = <0>;
761 #clock-cells = <0>;
766 #clock-cells = <0>;
771 #clock-cells = <0>;
776 #clock-cells = <0>;
782 #clock-cells = <0>;
786 #clock-cells = <0>;
791 #clock-cells = <0>;
796 #clock-cells = <0>;
801 #clock-cells = <0>;
806 #clock-cells = <0>;
811 #clock-cells = <0>;
816 #clock-cells = <0>;
821 #clock-cells = <0>;
826 #clock-cells = <0>;
831 #clock-cells = <0>;
838 compatible = "atmel,at91sam9260-rstc";
844 compatible = "atmel,at91sam9260-shdwc";
850 compatible = "atmel,at91sam9260-pit";
857 compatible = "atmel,at91sam9260-rtt";
865 compatible = "atmel,at91sam9260-wdt";
873 compatible = "atmel,at91sam9260-gpbr", "syscon";
881 compatible = "i2c-gpio";
882 pinctrl-names = "default";
883 pinctrl-0 = <&pinctrl_i2c_bitbang>;
884 gpios = <&pioA 7 GPIO_ACTIVE_HIGH>, /* sda */
886 i2c-gpio,sda-open-drain;
887 i2c-gpio,scl-open-drain;
888 i2c-gpio,delay-us = <2>; /* ~100 kHz */
889 #address-cells = <1>;
890 #size-cells = <0>;