Lines Matching +full:at91rm9200 +full:- +full:tcb
2 * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
6 * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
12 #include <dt-bindings/pinctrl/at91.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
14 #include <dt-bindings/gpio/gpio.h>
15 #include <dt-bindings/clock/at91.h>
20 interrupt-parent = <&aic>;
40 #address-cells = <0>;
41 #size-cells = <0>;
44 compatible = "arm,arm926ej-s";
55 compatible = "fixed-clock";
56 #clock-cells = <0>;
57 clock-frequency = <0>;
61 compatible = "fixed-clock";
62 #clock-cells = <0>;
63 clock-frequency = <0>;
67 compatible = "fixed-clock";
68 #clock-cells = <0>;
69 clock-frequency = <5000000>;
74 compatible = "mmio-sram";
79 compatible = "simple-bus";
80 #address-cells = <1>;
81 #size-cells = <1>;
83 u-boot,dm-pre-reloc;
86 compatible = "simple-bus";
87 #address-cells = <1>;
88 #size-cells = <1>;
90 u-boot,dm-pre-reloc;
92 aic: interrupt-controller@fffff000 {
93 #interrupt-cells = <3>;
94 compatible = "atmel,at91rm9200-aic";
95 interrupt-controller;
97 atmel,external-irqs = <29 30 31>;
101 compatible = "atmel,at91sam9260-sdramc";
106 compatible = "atmel,at91sam9260-pmc", "syscon";
109 interrupt-controller;
110 #address-cells = <1>;
111 #size-cells = <0>;
112 #interrupt-cells = <1>;
113 u-boot,dm-pre-reloc;
116 compatible = "atmel,at91rm9200-clk-main-osc";
117 #clock-cells = <0>;
118 interrupts-extended = <&pmc AT91_PMC_MOSCS>;
123 compatible = "atmel,at91rm9200-clk-main";
124 #clock-cells = <0>;
129 compatible = "fixed-clock";
130 #clock-cells = <0>;
131 clock-frequency = <32768>;
132 clock-accuracy = <50000000>;
136 compatible = "atmel,at91sam9260-clk-slow";
137 #clock-cells = <0>;
142 compatible = "atmel,at91rm9200-clk-pll";
143 #clock-cells = <0>;
144 interrupts-extended = <&pmc AT91_PMC_LOCKA>;
147 atmel,clk-input-range = <1000000 32000000>;
148 #atmel,pll-clk-output-range-cells = <4>;
149 atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
154 compatible = "atmel,at91rm9200-clk-pll";
155 #clock-cells = <0>;
156 interrupts-extended = <&pmc AT91_PMC_LOCKB>;
159 atmel,clk-input-range = <1000000 5000000>;
160 #atmel,pll-clk-output-range-cells = <4>;
161 atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
165 compatible = "atmel,at91rm9200-clk-master";
166 #clock-cells = <0>;
167 interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
169 atmel,clk-output-range = <0 105000000>;
170 atmel,clk-divisors = <1 2 4 0>;
171 u-boot,dm-pre-reloc;
175 compatible = "atmel,at91rm9200-clk-usb";
176 #clock-cells = <0>;
177 atmel,clk-divisors = <1 2 4 0>;
182 compatible = "atmel,at91rm9200-clk-programmable";
183 #address-cells = <1>;
184 #size-cells = <0>;
185 interrupt-parent = <&pmc>;
189 #clock-cells = <0>;
195 #clock-cells = <0>;
202 compatible = "atmel,at91rm9200-clk-system";
203 #address-cells = <1>;
204 #size-cells = <0>;
207 #clock-cells = <0>;
213 #clock-cells = <0>;
219 #clock-cells = <0>;
225 #clock-cells = <0>;
232 compatible = "atmel,at91rm9200-clk-peripheral";
233 #address-cells = <1>;
234 #size-cells = <0>;
236 u-boot,dm-pre-reloc;
239 #clock-cells = <0>;
241 u-boot,dm-pre-reloc;
245 #clock-cells = <0>;
247 u-boot,dm-pre-reloc;
251 #clock-cells = <0>;
253 u-boot,dm-pre-reloc;
257 #clock-cells = <0>;
262 #clock-cells = <0>;
267 #clock-cells = <0>;
272 #clock-cells = <0>;
277 #clock-cells = <0>;
282 #clock-cells = <0>;
288 #clock-cells = <0>;
292 #clock-cells = <0>;
297 #clock-cells = <0>;
302 #clock-cells = <0>;
307 #clock-cells = <0>;
312 #clock-cells = <0>;
317 #clock-cells = <0>;
322 #clock-cells = <0>;
327 #clock-cells = <0>;
332 #clock-cells = <0>;
337 #clock-cells = <0>;
342 #clock-cells = <0>;
347 #clock-cells = <0>;
352 #clock-cells = <0>;
357 #clock-cells = <0>;
362 #clock-cells = <0>;
369 compatible = "atmel,at91sam9260-rstc";
375 compatible = "atmel,at91sam9260-shdwc";
381 compatible = "atmel,at91sam9260-pit";
388 compatible = "atmel,at91rm9200-tcb";
394 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
398 compatible = "atmel,at91rm9200-tcb";
404 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
408 compatible = "atmel,at91rm9200-gpio";
411 #gpio-cells = <2>;
412 gpio-controller;
413 interrupt-controller;
414 #interrupt-cells = <2>;
416 u-boot,dm-pre-reloc;
420 compatible = "atmel,at91rm9200-gpio";
423 #gpio-cells = <2>;
424 gpio-controller;
425 interrupt-controller;
426 #interrupt-cells = <2>;
428 u-boot,dm-pre-reloc;
432 compatible = "atmel,at91rm9200-gpio";
435 #gpio-cells = <2>;
436 gpio-controller;
437 interrupt-controller;
438 #interrupt-cells = <2>;
440 u-boot,dm-pre-reloc;
444 #address-cells = <1>;
445 #size-cells = <1>;
446 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
453 atmel,mux-mask = <
459 u-boot,dm-pre-reloc;
463 u-boot,dm-pre-reloc;
464 pinctrl_dbgu: dbgu-0 {
472 pinctrl_usart0: usart0-0 {
478 pinctrl_usart0_rts: usart0_rts-0 {
483 pinctrl_usart0_cts: usart0_cts-0 {
488 pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
494 pinctrl_usart0_dcd: usart0_dcd-0 {
499 pinctrl_usart0_ri: usart0_ri-0 {
506 pinctrl_usart1: usart1-0 {
512 pinctrl_usart1_rts: usart1_rts-0 {
517 pinctrl_usart1_cts: usart1_cts-0 {
524 pinctrl_usart2: usart2-0 {
530 pinctrl_usart2_rts: usart2_rts-0 {
535 pinctrl_usart2_cts: usart2_cts-0 {
542 pinctrl_usart3: usart3-0 {
548 pinctrl_usart3_rts: usart3_rts-0 {
553 pinctrl_usart3_cts: usart3_cts-0 {
560 pinctrl_uart0: uart0-0 {
568 pinctrl_uart1: uart1-0 {
576 pinctrl_nand: nand-0 {
584 pinctrl_macb_rmii: macb_rmii-0 {
598 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
610 pinctrl_macb_rmii_mii_alt: macb_rmii_mii-1 {
624 pinctrl_mmc0_clk: mmc0_clk-0 {
629 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
635 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
642 pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
648 pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
657 pinctrl_ssc0_tx: ssc0_tx-0 {
664 pinctrl_ssc0_rx: ssc0_rx-0 {
673 pinctrl_spi0: spi0-0 {
682 pinctrl_spi1: spi1-0 {
691 pinctrl_i2c_gpio0: i2c_gpio0-0 {
699 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
703 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
707 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
711 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
715 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
719 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
723 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
727 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
731 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
737 pinctrl_tcb1_tclk0: tcb1_tclk0-0 {
741 pinctrl_tcb1_tclk1: tcb1_tclk1-0 {
745 pinctrl_tcb1_tclk2: tcb1_tclk2-0 {
749 pinctrl_tcb1_tioa0: tcb1_tioa0-0 {
753 pinctrl_tcb1_tioa1: tcb1_tioa1-0 {
757 pinctrl_tcb1_tioa2: tcb1_tioa2-0 {
761 pinctrl_tcb1_tiob0: tcb1_tiob0-0 {
765 pinctrl_tcb1_tiob1: tcb1_tiob1-0 {
769 pinctrl_tcb1_tiob2: tcb1_tiob2-0 {
776 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
779 pinctrl-names = "default";
780 pinctrl-0 = <&pinctrl_dbgu>;
782 clock-names = "usart";
787 compatible = "atmel,at91sam9260-usart";
790 atmel,use-dma-rx;
791 atmel,use-dma-tx;
792 pinctrl-names = "default";
793 pinctrl-0 = <&pinctrl_usart0>;
795 clock-names = "usart";
800 compatible = "atmel,at91sam9260-usart";
803 atmel,use-dma-rx;
804 atmel,use-dma-tx;
805 pinctrl-names = "default";
806 pinctrl-0 = <&pinctrl_usart1>;
808 clock-names = "usart";
813 compatible = "atmel,at91sam9260-usart";
816 atmel,use-dma-rx;
817 atmel,use-dma-tx;
818 pinctrl-names = "default";
819 pinctrl-0 = <&pinctrl_usart2>;
821 clock-names = "usart";
826 compatible = "atmel,at91sam9260-usart";
829 atmel,use-dma-rx;
830 atmel,use-dma-tx;
831 pinctrl-names = "default";
832 pinctrl-0 = <&pinctrl_usart3>;
834 clock-names = "usart";
839 compatible = "atmel,at91sam9260-usart";
842 atmel,use-dma-rx;
843 atmel,use-dma-tx;
844 pinctrl-names = "default";
845 pinctrl-0 = <&pinctrl_uart0>;
847 clock-names = "usart";
852 compatible = "atmel,at91sam9260-usart";
855 atmel,use-dma-rx;
856 atmel,use-dma-tx;
857 pinctrl-names = "default";
858 pinctrl-0 = <&pinctrl_uart1>;
860 clock-names = "usart";
865 compatible = "cdns,at91sam9260-macb", "cdns,macb";
868 pinctrl-names = "default";
869 pinctrl-0 = <&pinctrl_macb_rmii>;
871 clock-names = "hclk", "pclk";
876 compatible = "atmel,at91sam9260-udc";
880 clock-names = "pclk", "hclk";
885 compatible = "atmel,at91sam9260-i2c";
888 #address-cells = <1>;
889 #size-cells = <0>;
898 #address-cells = <1>;
899 #size-cells = <0>;
900 pinctrl-names = "default";
902 clock-names = "mci_clk";
907 compatible = "atmel,at91rm9200-ssc";
910 pinctrl-names = "default";
911 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
913 clock-names = "pclk";
918 #address-cells = <1>;
919 #size-cells = <0>;
920 compatible = "atmel,at91rm9200-spi";
923 pinctrl-names = "default";
924 pinctrl-0 = <&pinctrl_spi0>;
926 clock-names = "spi_clk";
931 #address-cells = <1>;
932 #size-cells = <0>;
933 compatible = "atmel,at91rm9200-spi";
936 pinctrl-names = "default";
937 pinctrl-0 = <&pinctrl_spi1>;
939 clock-names = "spi_clk";
944 #address-cells = <1>;
945 #size-cells = <0>;
946 compatible = "atmel,at91sam9260-adc";
950 clock-names = "adc_clk", "adc_op_clk";
951 atmel,adc-use-external-triggers;
952 atmel,adc-channels-used = <0xf>;
953 atmel,adc-vref = <3300>;
954 atmel,adc-startup-time = <15>;
955 atmel,adc-res = <8 10>;
956 atmel,adc-res-names = "lowres", "highres";
957 atmel,adc-use-res = "highres";
961 trigger-name = "timer-counter-0";
962 trigger-value = <0x1>;
966 trigger-name = "timer-counter-1";
967 trigger-value = <0x3>;
972 trigger-name = "timer-counter-2";
973 trigger-value = <0x5>;
978 trigger-name = "external";
979 trigger-value = <0xd>;
980 trigger-external;
985 compatible = "atmel,at91sam9260-rtt";
993 compatible = "atmel,at91sam9260-wdt";
997 atmel,watchdog-type = "hardware";
998 atmel,reset-type = "all";
999 atmel,dbg-halt;
1004 compatible = "atmel,at91sam9260-gpbr", "syscon";
1011 compatible = "atmel,at91rm9200-nand";
1012 #address-cells = <1>;
1013 #size-cells = <1>;
1017 atmel,nand-addr-offset = <21>;
1018 atmel,nand-cmd-offset = <22>;
1019 pinctrl-names = "default";
1020 pinctrl-0 = <&pinctrl_nand>;
1029 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
1033 clock-names = "ohci_clk", "hclk", "uhpck";
1039 compatible = "i2c-gpio";
1043 i2c-gpio,sda-open-drain;
1044 i2c-gpio,scl-open-drain;
1045 i2c-gpio,delay-us = <2>; /* ~100 kHz */
1046 #address-cells = <1>;
1047 #size-cells = <0>;
1048 pinctrl-names = "default";
1049 pinctrl-0 = <&pinctrl_i2c_gpio0>;