arm/dts/at91-sama5d3_xplained.dts

2  * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
9 /dts-v1/;
14 	compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
17 		u-boot,dm-pre-reloc;
18 		stdout-path = &dbgu;
31 			clock-frequency = <32768>;
35 			clock-frequency = <12000000>;
42 				u-boot,dm-pre-reloc;
43 …pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd…
44 				vmmc-supply = <&vcc_mmc0_reg>;
45 				vqmmc-supply = <&vcc_3v3_reg>;
49 					bus-width = <8>;
50 					cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
55 				u-boot,dm-pre-reloc;
56 				vmmc-supply = <&vcc_3v3_reg>;
57 				vqmmc-supply = <&vcc_3v3_reg>;
61 					bus-width = <4>;
62 					cd-gpios = <&pioE 1 GPIO_ACTIVE_LOW>;
67 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
76 				pinctrl-0 = <&pinctrl_i2c0_pu>;
84 					compatible = "active-semi,act8865";
90 							regulator-name = "VCC_1V8";
91 							regulator-min-microvolt = <1800000>;
92 							regulator-max-microvolt = <1800000>;
93 							regulator-always-on;
97 							regulator-name = "VCC_1V2";
98 							regulator-min-microvolt = <1200000>;
99 							regulator-max-microvolt = <1200000>;
100 							regulator-always-on;
104 							regulator-name = "VCC_3V3";
105 							regulator-min-microvolt = <3300000>;
106 							regulator-max-microvolt = <3300000>;
107 							regulator-always-on;
111 							regulator-name = "FUSE_2V5";
112 							regulator-min-microvolt = <2500000>;
113 							regulator-max-microvolt = <2500000>;
117 							regulator-name = "VDDANA";
118 							regulator-min-microvolt = <3300000>;
119 							regulator-max-microvolt = <3300000>;
120 							regulator-always-on;
127 				phy-mode = "rgmii";
128 				#address-cells = <1>;
129 				#size-cells = <0>;
132 				ethernet-phy@7 {
138 				pinctrl-names = "default";
139 				pinctrl-0 = <&pinctrl_pwm0_pwmh0_0 &pinctrl_pwm0_pwmh1_0>;
148 				pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
157 				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
161 					bus-width = <4>;
162 					cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
167 				cs-gpios = <&pioC 25 0>;
172 				pinctrl-0 = <
190 				pinctrl-0 = <&pinctrl_i2c2_pu>;
195 				phy-mode = "rmii";
196 				#address-cells = <1>;
197 				#size-cells = <0>;
200 				ethernet-phy@1 {
206 				u-boot,dm-pre-reloc;
212 					u-boot,dm-pre-reloc;
231 						u-boot,dm-pre-reloc;
237 						u-boot,dm-pre-reloc;
251 			nand-bus-width = <8>;
252 			nand-ecc-mode = "hw";
253 			atmel,has-pmecc;
254 			atmel,pmecc-cap = <4>;
255 			atmel,pmecc-sector-size = <512>;
256 			nand-on-flash-bbt;
291 			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
292 			pinctrl-names = "default";
293 			pinctrl-0 = <&pinctrl_usba_vbus>;
298 			num-ports = <3>;
299 			atmel,vbus-gpio = <0
312 		compatible = "regulator-fixed";
314 		regulator-name = "mmc0-card-supply";
315 		regulator-min-microvolt = <3300000>;
316 		regulator-max-microvolt = <3300000>;
317 		regulator-always-on;
321 		compatible = "gpio-keys";
323 		pinctrl-names = "default";
324 		pinctrl-0 = <&pinctrl_key_gpio>;
328 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
330 			wakeup-source;
335 		compatible = "gpio-leds";
339 			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
340 			linux,default-trigger = "heartbeat";
345 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;