arm/dts/at91-sama5d2_xplained.dts

1 /dts-v1/;
3 #include "sama5d2-pinfunc.h"
7 	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
10 		u-boot,dm-pre-reloc;
11 		stdout-path = &uart1;
16 			num-ports = <3>;
17 			atmel,vbus-gpio = <&pioA 42 0>;
18 			pinctrl-names = "default";
19 			pinctrl-0 = <&pinctrl_usb_default>;
27 		sdmmc0: sdio-host@a0000000 {
28 			bus-width = <8>;
29 			pinctrl-names = "default";
30 			pinctrl-0 = <&pinctrl_sdmmc0_cmd_dat_default &pinctrl_sdmmc0_ck_cd_default>;
32 			u-boot,dm-pre-reloc;
35 		sdmmc1: sdio-host@b0000000 {
36 			bus-width = <4>;
37 			pinctrl-names = "default";
38 			pinctrl-0 = <&pinctrl_sdmmc1_cmd_dat_default &pinctrl_sdmmc1_ck_cd_default>;
40 			u-boot,dm-pre-reloc;
48 					compatible = "atmel,sama5d2-qspi-flash";
50 					#address-cells = <1>;
51 					#size-cells = <1>;
52 					pinctrl-names = "default";
53 					pinctrl-0 = <&pinctrl_qspi0_default>;
54 					spi-max-frequency = <83000000>;
69 				cs-gpios = <&pioA 17 0>, <0>, <0>, <0>;
70 				pinctrl-names = "default";
71 				pinctrl-0 = <&pinctrl_spi0_default>;
73 				u-boot,dm-pre-reloc;
76 					compatible = "spi-flash";
78 					spi-max-frequency = <50000000>;
79 					u-boot,dm-pre-reloc;
84 				pinctrl-names = "default";
85 				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
86 				phy-mode = "rmii";
89 				ethernet-phy@1 {
95 				pinctrl-names = "default";
96 				pinctrl-0 = <&pinctrl_uart1_default>;
98 				u-boot,dm-pre-reloc;
102 				pinctrl-names = "default";
103 				pinctrl-0 = <&pinctrl_i2c1_default>;
110 						pinmux = <PIN_PD4__TWD1>,
112 						bias-disable;
116 						pinmux = <PIN_PC9__GPIO>;
117 						bias-disable;
121 						pinmux = <PIN_PB14__GTXCK>,
131 						bias-disable;
135 						pinmux = <PIN_PA22__QSPI0_SCK>,
141 						bias-disable;
145 						pinmux = <PIN_PA1__SDMMC0_CMD>,
154 						bias-pull-up;
155 						u-boot,dm-pre-reloc;
159 						pinmux = <PIN_PA0__SDMMC0_CK>,
163 						bias-disable;
164 						u-boot,dm-pre-reloc;
168 						pinmux = <PIN_PA28__SDMMC1_CMD>,
173 						bias-pull-up;
174 						u-boot,dm-pre-reloc;
178 						pinmux = <PIN_PA22__SDMMC1_CK>,
180 						bias-disable;
181 						u-boot,dm-pre-reloc;
185 						pinmux = <PIN_PA14__SPI0_SPCK>,
188 						bias-disable;
189 						u-boot,dm-pre-reloc;
193 						pinmux = <PIN_PD2__URXD1>,
195 						bias-disable;
196 						u-boot,dm-pre-reloc;
200 						pinmux = <PIN_PB10__GPIO>;
201 						bias-disable;
205 						pinmux = <PIN_PA31__GPIO>;
206 						bias-disable;