arm/dts/ast2500.dtsi

3  * https://raw.githubusercontent.com/torvalds/linux/34ea5c9d/arch/arm/boot/dts/aspeed-g5.dtsi
9 	compatible = "aspeed,ast2500";
10 	#address-cells = <1>;
11 	#size-cells = <1>;
12 	interrupt-parent = <&vic>;
15 		#address-cells = <1>;
16 		#size-cells = <0>;
19 			compatible = "arm,arm1176jzf-s";
26 		compatible = "simple-bus";
27 		#address-cells = <1>;
28 		#size-cells = <1>;
31 		vic: interrupt-controller@1e6c0080 {
32 			compatible = "aspeed,ast2400-vic";
33 			interrupt-controller;
34 			#interrupt-cells = <1>;
35 			valid-sources = <0xfefff7ff 0x0807ffff>;
43 			no-hw-checksum;
51 			no-hw-checksum;
56 			compatible = "simple-bus";
57 			#address-cells = <1>;
58 			#size-cells = <1>;
62 				#clock-cells = <0>;
63 				compatible = "aspeed,g5-clkin-clock";
68 				compatible = "aspeed,g5-scu", "syscon", "simple-mfd";
72 					compatible = "aspeed,g5-pinctrl";
73 					aspeed,external-nodes = <&gfx &lhc>;
884 				#clock-cells = <0>;
885 				compatible = "aspeed,g5-hpll-clock";
891 				#clock-cells = <0>;
892 				compatible = "aspeed,g5-ahb-clock";
898 				#clock-cells = <0>;
899 				compatible = "aspeed,g5-apb-clock";
905 				#clock-cells = <0>;
906 				compatible = "aspeed,uart-clock";
911 				compatible = "aspeed,ast2500-gfx", "syscon";
913 				reg-io-width = <4>;
917 				compatible = "mmio-sram";
922 				#gpio-cells = <2>;
923 				gpio-controller;
924 				compatible = "aspeed,ast2500-gpio";
927 				gpio-ranges = <&pinctrl 0 0 220>;
928 				interrupt-controller;
932 				compatible = "aspeed,ast2400-timer";
964 				reg-shift = <2>;
967 				no-loopback-test;
972 				compatible = "aspeed,ast2500-lpc", "simple-mfd";
975 				#address-cells = <1>;
976 				#size-cells = <1>;
979 				lpc_bmc: lpc-bmc@0 {
980 					compatible = "aspeed,ast2500-lpc-bmc";
984 				lpc_host: lpc-host@80 {
985 					compatible = "aspeed,ast2500-lpc-host", "simple-mfd", "syscon";
988 					#address-cells = <1>;
989 					#size-cells = <1>;
992 					reg-io-width = <4>;
995 						compatible = "aspeed,ast2500-lhc";
1004 				reg-shift = <2>;
1007 				no-loopback-test;
1014 				reg-shift = <2>;
1017 				no-loopback-test;
1024 				reg-shift = <2>;
1027 				no-loopback-test;
1034 				reg-shift = <2>;
1037 				current-speed = <38400>;
1038 				no-loopback-test;
1045 				reg-shift = <2>;
1048 				no-loopback-test;