Lines Matching +full:bitclock +full:- +full:inversion
2 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
8 /dts-v1/;
11 #include "am57xx-commercial-grade.dtsi"
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
16 compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
19 stdout-path = &uart3;
34 vdd_3v3: fixedregulator-vdd_3v3 {
35 compatible = "regulator-fixed";
36 regulator-name = "vdd_3v3";
37 vin-supply = <®en1>;
38 regulator-min-microvolt = <3300000>;
39 regulator-max-microvolt = <3300000>;
42 aic_dvdd: fixedregulator-aic_dvdd {
43 compatible = "regulator-fixed";
44 regulator-name = "aic_dvdd_fixed";
45 vin-supply = <&vdd_3v3>;
46 regulator-min-microvolt = <1800000>;
47 regulator-max-microvolt = <1800000>;
50 vtt_fixed: fixedregulator-vtt {
52 compatible = "regulator-fixed";
53 regulator-name = "vtt_fixed";
54 vin-supply = <&smps3_reg>;
55 regulator-min-microvolt = <3300000>;
56 regulator-max-microvolt = <3300000>;
57 regulator-always-on;
58 regulator-boot-on;
59 enable-active-high;
64 compatible = "gpio-leds";
67 label = "beagle-x15:usr0";
69 linux,default-trigger = "heartbeat";
70 default-state = "off";
74 label = "beagle-x15:usr1";
76 linux,default-trigger = "cpu0";
77 default-state = "off";
81 label = "beagle-x15:usr2";
83 linux,default-trigger = "mmc0";
84 default-state = "off";
88 label = "beagle-x15:usr3";
90 linux,default-trigger = "disk-activity";
91 default-state = "off";
97 compatible = "gpio-fan";
99 gpio-fan,speed-map = <0 0>,
101 #cooling-cells = <2>;
105 compatible = "hdmi-connector";
112 remote-endpoint = <&tpd12s015_out>;
121 #address-cells = <1>;
122 #size-cells = <0>;
128 remote-endpoint = <&hdmi_out>;
136 remote-endpoint = <&hdmi_connector_in>;
143 compatible = "simple-audio-card";
144 simple-audio-card,name = "BeagleBoard-X15";
145 simple-audio-card,widgets =
148 simple-audio-card,routing =
153 simple-audio-card,format = "dsp_b";
154 simple-audio-card,bitclock-master = <&sound0_master>;
155 simple-audio-card,frame-master = <&sound0_master>;
156 simple-audio-card,bitclock-inversion;
158 simple-audio-card,cpu {
159 sound-dai = <&mcasp3>;
162 sound0_master: simple-audio-card,codec {
163 sound-dai = <&tlv320aic3104>;
171 pinctrl-single,pins = <
183 pinctrl-single,pins = <
199 clock-frequency = <400000>;
204 interrupt-parent = <&gpio1>;
207 #interrupt-cells = <2>;
208 interrupt-controller;
210 ti,system-power-controller;
213 compatible = "ti,tps659038-pmic";
218 regulator-name = "smps12";
219 regulator-min-microvolt = < 850000>;
220 regulator-max-microvolt = <1250000>;
221 regulator-always-on;
222 regulator-boot-on;
227 regulator-name = "smps3";
228 regulator-min-microvolt = <1350000>;
229 regulator-max-microvolt = <1350000>;
230 regulator-always-on;
231 regulator-boot-on;
236 regulator-name = "smps45";
237 regulator-min-microvolt = < 850000>;
238 regulator-max-microvolt = <1250000>;
239 regulator-always-on;
240 regulator-boot-on;
245 regulator-name = "smps6";
246 regulator-min-microvolt = <850000>;
247 regulator-max-microvolt = <1150000>;
248 regulator-always-on;
249 regulator-boot-on;
256 regulator-name = "smps8";
257 regulator-min-microvolt = <1800000>;
258 regulator-max-microvolt = <1800000>;
259 regulator-always-on;
260 regulator-boot-on;
267 regulator-name = "ldo1";
268 regulator-min-microvolt = <1800000>;
269 regulator-max-microvolt = <3300000>;
270 regulator-boot-on;
271 regulator-always-on;
276 regulator-name = "ldo2";
277 regulator-min-microvolt = <3300000>;
278 regulator-max-microvolt = <3300000>;
279 regulator-always-on;
280 regulator-boot-on;
285 regulator-name = "ldo3";
286 regulator-min-microvolt = <1800000>;
287 regulator-max-microvolt = <1800000>;
288 regulator-always-on;
289 regulator-boot-on;
294 regulator-name = "ldo4";
295 regulator-min-microvolt = <1800000>;
296 regulator-max-microvolt = <1800000>;
297 regulator-always-on;
298 regulator-boot-on;
303 regulator-name = "ldo9";
304 regulator-min-microvolt = <1050000>;
305 regulator-max-microvolt = <1050000>;
306 regulator-always-on;
307 regulator-boot-on;
312 regulator-name = "ldoln";
313 regulator-min-microvolt = <1800000>;
314 regulator-max-microvolt = <1800000>;
315 regulator-always-on;
316 regulator-boot-on;
321 regulator-name = "ldousb";
322 regulator-min-microvolt = <3300000>;
323 regulator-max-microvolt = <3300000>;
324 regulator-boot-on;
329 regulator-name = "regen1";
330 regulator-boot-on;
331 regulator-always-on;
337 compatible = "ti,palmas-rtc";
338 interrupt-parent = <&tps659038>;
340 wakeup-source;
344 compatible = "ti,palmas-pwrbutton";
345 interrupt-parent = <&tps659038>;
347 wakeup-source;
348 ti,palmas-long-press-seconds = <12>;
352 compatible = "ti,palmas-gpio";
353 gpio-controller;
354 #gpio-cells = <2>;
358 compatible = "ti,palmas-usb-vid";
359 ti,enable-vbus-detection;
360 vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
368 interrupt-parent = <&gpio7>;
370 #thermal-sensor-cells = <1>;
374 #sound-dai-cells = <0>;
377 assigned-clocks = <&clkoutmux2_clk_mux>;
378 assigned-clock-parents = <&sys_clk2_dclk_div>;
381 adc-settle-ms = <40>;
383 AVDD-supply = <&vdd_3v3>;
384 IOVDD-supply = <&vdd_3v3>;
385 DRVDD-supply = <&vdd_3v3>;
386 DVDD-supply = <&aic_dvdd>;
397 clock-frequency = <400000>;
402 interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
404 interrupt-names = "irq", "wakeup";
406 vcc-supply = <&vdd_3v3>;
407 wakeup-source;
412 ti,no-reset-on-init;
413 ti,no-idle-on-init;
417 cpu0-supply = <&smps12_reg>;
418 voltage-tolerance = <1>;
423 interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
434 phy-mode = "rgmii";
440 phy-mode = "rgmii";
447 pinctrl-names = "default";
448 pinctrl-0 = <&mmc1_pins_default>;
450 bus-width = <4>;
451 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
457 pinctrl-names = "default";
458 pinctrl-0 = <&mmc2_pins_default>;
460 vmmc-supply = <&vdd_3v3>;
461 bus-width = <8>;
462 ti,non-removable;
463 cap-mmc-dual-data-rate;
471 phy-supply = <&ldousb_reg>;
475 phy-supply = <&ldousb_reg>;
491 * as "host" or "dual-role". If so, provide
509 cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
515 polling-delay-passive = <1250>; /* milliseconds */
516 polling-delay = <1500>; /* milliseconds */
519 thermal-sensors = <&tmp102 0>;
535 board_cooling_maps: cooling-maps {
538 cooling-device =
548 vdda_video-supply = <&ldoln_reg>;
553 vdda-supply = <&ldo4_reg>;
557 remote-endpoint = <&tpd12s015_in>;
567 #sound-dai-cells = <0>;
568 assigned-clocks = <&mcasp3_ahclkx_mux>;
569 assigned-clock-parents = <&sys_clkin2>;
572 op-mode = <0>; /* MCASP_IIS_MODE */
573 tdm-slots = <2>;
575 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
578 tx-num-evt = <32>;
579 rx-num-evt = <32>;