arm/dts/am335x-pxm2.dtsi

6  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
14 #include <dt-bindings/input/input.h>
18 		stdout-path = &uart0;
19 		tick-timer = &timer2;
24 			cpu0-supply = <&vdd1_reg>;
29 		compatible = "pwm-backlight";
31 		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
40 		default-brightness-level = <80>;
41 		power-supply = <&backlight_reg>;
42 		enable-gpios = <&gpio3 16 0>;
46 		compatible = "regulator-fixed";
47 		regulator-name = "backlight_reg";
48 		regulator-boot-on;
51 	gpio_keys: restart-keys {
52 		compatible = "gpio-keys";
53 		#address-cells = <1>;
54 		#size-cells = <0>;
61 			gpio-key,wakeup;
66 		compatible = "gpio-leds";
88 		compatible = "regulator-gpio";
89                 regulator-name = "lcd-3v3";
90 		regulator-min-microvolt = <1800000>;
91                 regulator-max-microvolt = <3300000>;
92 		regulator-type = "voltage";
93 		startup-delay-us = <100>;
96 		enable-at-boot;
98                 enable-active-high;
102 		compatible = "regulator-fixed";
103 		regulator-name = "vbat";
104 		regulator-min-microvolt = <5000000>;
105 		regulator-max-microvolt = <5000000>;
106 		regulator-boot-on;
110 		compatible = "regulator-fixed";
111 		regulator-name = "vmmc";
112 		regulator-min-microvolt = <3300000>;
113 		regulator-max-microvolt = <3300000>;
123 	phy-mode = "rgmii-txid";
128 	phy-mode = "rgmii-txid";
132 	pinctrl-names = "default", "sleep";
133 	pinctrl-0 = <&davinci_mdio_default>;
134 	pinctrl-1 = <&davinci_mdio_sleep>;
147 		pinctrl-names = "default";
148 		pinctrl-0 = <&ecap0_pins>;
153 	pinctrl-names = "default";
154 	pinctrl-0 = <&nandflash_pins>;
161 		nand-bus-width = <8>;
162 		ti,nand-ecc-opt = "bch8";
163 		gpmc,device-nand = "true";
164 		gpmc,device-width = <1>;
165 		gpmc,sync-clk-ps = <0>;
166 		gpmc,cs-on-ns = <0>;
167 		gpmc,cs-rd-off-ns = <44>;
168 		gpmc,cs-wr-off-ns = <44>;
169 		gpmc,adv-on-ns = <6>;
170 		gpmc,adv-rd-off-ns = <34>;
171 		gpmc,adv-wr-off-ns = <44>;
172 		gpmc,we-on-ns = <0>;
173 		gpmc,we-off-ns = <40>;
174 		gpmc,oe-on-ns = <0>;
175 		gpmc,oe-off-ns = <54>;
176 		gpmc,access-ns = <64>;
177 		gpmc,rd-cycle-ns = <82>;
178 		gpmc,wr-cycle-ns = <82>;
179 		gpmc,wait-on-read = "true";
180 		gpmc,wait-on-write = "true";
181 		gpmc,bus-turnaround-ns = <0>;
182 		gpmc,cycle2cycle-delay-ns = <0>;
183 		gpmc,clk-activation-ns = <0>;
184 		gpmc,wait-monitoring-ns = <0>;
185 		gpmc,wr-access-ns = <40>;
186 		gpmc,wr-data-mux-bus-ns = <0>;
188 		#address-cells = <1>;
189 		#size-cells = <1>;
195 	pinctrl-names = "default";
196 	pinctrl-0 = <&i2c0_pins>;
197 	clock-frequency = <400000>;
211 	pinctrl-names = "default";
212 	pinctrl-0 = <&i2c1_pins>;
213 	clock-frequency = <100000>;
223 	pinctrl-names = "default";
224 	pinctrl-0 = <&i2c2_pins>;
225 	clock-frequency = <100000>;
231 		interrupt-parent = <&gpio1>;
233 		wakeup-gpios = <&gpio1 25 0>;
242 	pinctrl-names = "default", "sleep";
243 	pinctrl-0 = <&cpsw_default>;
244 	pinctrl-1 = <&cpsw_sleep>;
249 	vmmc-supply = <&vmmc>;
250 	bus-width = <4>;
251 	cd-gpios = <&gpio0 6 0>;
252 	wp-gpios = <&gpio3 18 0>;
257 	rgmii-no-delay;
263 	vcc1-supply = <&vbat>;
264 	vcc2-supply = <&vbat>;
265 	vcc3-supply = <&vbat>;
266 	vcc4-supply = <&vbat>;
267 	vcc5-supply = <&vbat>;
268 	vcc6-supply = <&vbat>;
269 	vcc7-supply = <&vbat>;
270 	vccio-supply = <&vbat>;
274 			regulator-always-on;
278 			regulator-always-on;
282 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
283 			regulator-name = "vdd_mpu";
284 			regulator-min-microvolt = <912500>;
285 			regulator-max-microvolt = <1312500>;
286 			regulator-boot-on;
287 			regulator-always-on;
291 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
292 			regulator-name = "vdd_core";
293 			regulator-min-microvolt = <912500>;
294 			regulator-max-microvolt = <1150000>;
295 			regulator-boot-on;
296 			regulator-always-on;
300 			regulator-always-on;
304 			regulator-always-on;
308 			regulator-always-on;
312 			regulator-always-on;
316 			regulator-always-on;
320 			regulator-always-on;
324 			regulator-always-on;
328 			regulator-always-on;
332 			regulator-min-microvolt = <1800000>;
333 			regulator-max-microvolt = <3300000>;
334 			regulator-always-on;
340 	pinctrl-names = "default";
341 	pinctrl-0 = <&uart0_pins>;
372 	pinctrl-names = "default";
373 	pinctrl-0 = <&clkout2_pin &gpio_pin>;
376 		pinctrl-single,pins = <
382 		pinctrl-single,pins = <
400 		pinctrl-single,pins = <
418 		pinctrl-single,pins = <
426 		pinctrl-single,pins = <
434 		pinctrl-single,pins = <
442 		pinctrl-single,pins = <
455 		pinctrl-single,pins = <
462 		pinctrl-single,pins = <
469 		pinctrl-single,pins = <
476 		pinctrl-single,pins = <
510 		pinctrl-single,pins = <
530 		pinctrl-single,pins = <
538 	wdt-keep-enabled;