Lines Matching +full:rgmii +full:- +full:txid
2 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
14 /dts-v1/;
17 #include <dt-bindings/pwm/pwm.h>
18 #include <dt-bindings/interrupt-controller/irq.h>
21 model = "TI AM335x EVM-SK";
22 compatible = "ti,am335x-evmsk", "ti,am33xx";
25 stdout-path = &uart0;
26 tick-timer = &timer2;
31 cpu0-supply = <&vdd1_reg>;
41 compatible = "regulator-fixed";
42 regulator-name = "vbat";
43 regulator-min-microvolt = <5000000>;
44 regulator-max-microvolt = <5000000>;
45 regulator-boot-on;
49 compatible = "regulator-fixed";
50 regulator-name = "lis3_reg";
51 regulator-boot-on;
55 pinctrl-names = "default";
56 pinctrl-0 = <&wl12xx_gpio>;
57 compatible = "regulator-fixed";
58 regulator-name = "vwl1271";
59 regulator-min-microvolt = <1800000>;
60 regulator-max-microvolt = <1800000>;
62 startup-delay-us = <70000>;
63 enable-active-high;
67 compatible = "regulator-fixed";
68 regulator-name = "vtt";
69 regulator-min-microvolt = <1500000>;
70 regulator-max-microvolt = <1500000>;
72 regulator-always-on;
73 regulator-boot-on;
74 enable-active-high;
78 pinctrl-names = "default";
79 pinctrl-0 = <&user_leds_s0>;
81 compatible = "gpio-leds";
86 default-state = "off";
92 default-state = "off";
98 linux,default-trigger = "mmc0";
99 default-state = "off";
105 linux,default-trigger = "heartbeat";
106 default-state = "off";
111 compatible = "gpio-keys";
112 #address-cells = <1>;
113 #size-cells = <0>;
131 wakeup-source;
142 compatible = "pwm-backlight";
144 brightness-levels = <0 58 61 66 75 90 125 170 255>;
145 default-brightness-level = <8>;
149 compatible = "simple-audio-card";
150 simple-audio-card,name = "AM335x-EVMSK";
151 simple-audio-card,widgets =
153 simple-audio-card,routing =
156 simple-audio-card,format = "dsp_b";
157 simple-audio-card,bitclock-master = <&sound_master>;
158 simple-audio-card,frame-master = <&sound_master>;
159 simple-audio-card,bitclock-inversion;
161 simple-audio-card,cpu {
162 sound-dai = <&mcasp1>;
165 sound_master: simple-audio-card,codec {
166 sound-dai = <&tlv320aic3106>;
167 system-clock-frequency = <24000000>;
173 pinctrl-names = "default", "sleep";
174 pinctrl-0 = <&lcd_pins_default>;
175 pinctrl-1 = <&lcd_pins_sleep>;
177 panel-info {
178 ac-bias = <255>;
179 ac-bias-intrpt = <0>;
180 dma-burst-sz = <16>;
183 sync-edge = <0>;
184 sync-ctrl = <1>;
185 raster-order = <0>;
186 fifo-th = <0>;
188 display-timings {
192 hback-porch = <43>;
193 hfront-porch = <8>;
194 hsync-len = <4>;
195 vback-porch = <12>;
196 vfront-porch = <4>;
197 vsync-len = <10>;
198 clock-frequency = <9000000>;
199 hsync-active = <0>;
200 vsync-active = <0>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
211 pinctrl-single,pins = <
244 pinctrl-single,pins = <
278 pinctrl-single,pins = <
287 pinctrl-single,pins = <
296 pinctrl-single,pins = <
303 pinctrl-single,pins = <
310 pinctrl-single,pins = <
316 pinctrl-single,pins = <
322 pinctrl-single,pins = <
354 pinctrl-single,pins = <
386 pinctrl-single,pins = <
394 pinctrl-single,pins = <
402 pinctrl-single,pins = <
408 pinctrl-single,pins = <
417 pinctrl-single,pins = <
426 pinctrl-single,pins = <
438 pinctrl-single,pins = <
445 pinctrl-names = "default";
446 pinctrl-0 = <&uart0_pins>;
452 pinctrl-names = "default";
453 pinctrl-0 = <&i2c0_pins>;
456 clock-frequency = <400000>;
465 Vdd-supply = <&lis3_reg>;
466 Vdd_IO-supply = <&lis3_reg>;
468 st,click-single-x;
469 st,click-single-y;
470 st,click-single-z;
471 st,click-thresh-x = <10>;
472 st,click-thresh-y = <10>;
473 st,click-thresh-z = <10>;
474 st,irq1-click;
475 st,irq2-click;
476 st,wakeup-x-lo;
477 st,wakeup-x-hi;
478 st,wakeup-y-lo;
479 st,wakeup-y-hi;
480 st,wakeup-z-lo;
481 st,wakeup-z-hi;
482 st,min-limit-x = <120>;
483 st,min-limit-y = <120>;
484 st,min-limit-z = <140>;
485 st,max-limit-x = <550>;
486 st,max-limit-y = <550>;
487 st,max-limit-z = <750>;
491 #sound-dai-cells = <0>;
497 AVDD-supply = <&vaux2_reg>;
498 IOVDD-supply = <&vaux2_reg>;
499 DRVDD-supply = <&vaux2_reg>;
500 DVDD-supply = <&vbat>;
538 pinctrl-names = "default";
539 pinctrl-0 = <&ecap2_pins>;
546 vcc1-supply = <&vbat>;
547 vcc2-supply = <&vbat>;
548 vcc3-supply = <&vbat>;
549 vcc4-supply = <&vbat>;
550 vcc5-supply = <&vbat>;
551 vcc6-supply = <&vbat>;
552 vcc7-supply = <&vbat>;
553 vccio-supply = <&vbat>;
557 regulator-always-on;
561 regulator-always-on;
565 /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
566 regulator-name = "vdd_mpu";
567 regulator-min-microvolt = <912500>;
568 regulator-max-microvolt = <1312500>;
569 regulator-boot-on;
570 regulator-always-on;
574 /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
575 regulator-name = "vdd_core";
576 regulator-min-microvolt = <912500>;
577 regulator-max-microvolt = <1150000>;
578 regulator-boot-on;
579 regulator-always-on;
583 regulator-always-on;
587 regulator-always-on;
591 regulator-always-on;
595 regulator-always-on;
599 regulator-always-on;
603 regulator-always-on;
607 regulator-always-on;
611 regulator-always-on;
615 regulator-min-microvolt = <1800000>;
616 regulator-max-microvolt = <3300000>;
617 regulator-always-on;
623 pinctrl-names = "default", "sleep";
624 pinctrl-0 = <&cpsw_default>;
625 pinctrl-1 = <&cpsw_sleep>;
631 pinctrl-names = "default", "sleep";
632 pinctrl-0 = <&davinci_mdio_default>;
633 pinctrl-1 = <&davinci_mdio_sleep>;
639 phy-mode = "rgmii-txid";
645 phy-mode = "rgmii-txid";
651 vmmc-supply = <&vmmc_reg>;
652 bus-width = <4>;
653 pinctrl-names = "default";
654 pinctrl-0 = <&mmc1_pins>;
655 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
667 ti,no-reset-on-init;
672 vmmc-supply = <&wl12xx_vmmc>;
673 ti,non-removable;
674 bus-width = <4>;
675 cap-power-off-card;
676 pinctrl-names = "default";
677 pinctrl-0 = <&mmc2_pins>;
679 #address-cells = <1>;
680 #size-cells = <0>;
684 interrupt-parent = <&gpio0>;
686 ref-clock-frequency = <38400000>;
691 #sound-dai-cells = <0>;
692 pinctrl-names = "default", "sleep";
693 pinctrl-0 = <&mcasp1_pins>;
694 pinctrl-1 = <&mcasp1_pins_sleep>;
698 op-mode = <0>; /* MCASP_IIS_MODE */
699 tdm-slots = <2>;
701 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
704 tx-num-evt = <32>;
705 rx-num-evt = <32>;
712 ti,x-plate-resistance = <200>;
713 ti,coordinate-readouts = <5>;
714 ti,wire-config = <0x00 0x11 0x22 0x33>;