64  * This function will craft a jumptable at 0x0 which will redirect interrupt
68  *  ldr pc, [pc, #0x18] ..... for each vector, thus repeated 8 times
71  * The "ldr pc, [pc, #0x18]" instruction above loads address from memory at
72  * offset 0x18 from current value of PC register. Note that PC is already
74  * actually 0x20, this the associated <destination address>. Loading the PC
79 	/* ldr pc, [pc, #0x18] */  in mx28_fixup_vt()
80 	const uint32_t ldr_pc = 0xe59ff018;  in mx28_fixup_vt()
81 	/* Jumptable location is 0x0 */  in mx28_fixup_vt()
82 	uint32_t *vt = (uint32_t *)0x0;  in mx28_fixup_vt()
85 	for (i = 0; i < 8; i++) {  in mx28_fixup_vt()
97 	return 0;  in arch_misc_init()
132 	return 0;  in arch_cpu_init()
139 	uint8_t rev = readl(&digctl_regs->hw_digctl_chipid) & 0x000000FF;  in get_cpu_rev()
144 		case 0x0:  in get_cpu_rev()
145 		case 0x1:  in get_cpu_rev()
146 		case 0x2:  in get_cpu_rev()
147 		case 0x3:  in get_cpu_rev()
148 		case 0x4:  in get_cpu_rev()
149 			return (MXC_CPU_MX23 << 12) | (rev + 0x10);  in get_cpu_rev()
151 			return 0;  in get_cpu_rev()
155 		case 0x1:  in get_cpu_rev()
156 			return (MXC_CPU_MX28 << 12) | 0x12;  in get_cpu_rev()
158 			return 0;  in get_cpu_rev()
161 		return 0;  in get_cpu_rev()
182 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);  in print_cpuinfo()
186 		get_imx_type((cpurev & 0xFF000) >> 12),  in print_cpuinfo()
187 		(cpurev & 0x000F0) >> 4,  in print_cpuinfo()
188 		(cpurev & 0x0000F) >> 0,  in print_cpuinfo()
191 	return 0;  in print_cpuinfo()
201 	return 0;  in do_mx28_showclocks()
231 	return 0;  in cpu_eth_init()
237 	mac[0] = 0x00;  in mx28_adjust_mac()
238 	mac[1] = 0x04; /* Use FSL vendor MAC address by default */  in mx28_adjust_mac()
253 	memset(mac, 0, 6);  in imx_get_mac_from_fuse()
265 	mac[2] = (data >> 24) & 0xff;  in imx_get_mac_from_fuse()
266 	mac[3] = (data >> 16) & 0xff;  in imx_get_mac_from_fuse()
267 	mac[4] = (data >> 8) & 0xff;  in imx_get_mac_from_fuse()
268 	mac[5] = data & 0xff;  in imx_get_mac_from_fuse()
274 	memset(mac, 0, 6);  in imx_get_mac_from_fuse()
281 		((CONFIG_SYS_TEXT_BASE - sizeof(struct mxs_spl_data)) & ~0xf);  in mxs_dram_init()
283 	if (data->mem_dram_size == 0) {  in mxs_dram_init()
285 			"Error, the RAM size passed up from SPL is 0!\n");  in mxs_dram_init()
290 	return 0;  in mxs_dram_init()