Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/kernel/drivers/video/fbdev/Kconfig

1 # SPDX-License-Identifier: GPL-2.0-only
20 	  a well-defined interface, so the software doesn't need to know
21 	  anything about the low-level (hardware register) stuff.
27 	  On several non-X86 architectures, the frame buffer device is the
35 	  and the Framebuffer-HOWTO at
36 	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
40 	  are compiling a kernel for a non-x86 architecture.
46 	  device-aware may cause unexpected results. If unsure, say N.
104 	  Allow generic frame-buffer functions to work on displays with 1, 2
136 	  Allow generic frame-buffer to provide get_fb_unmapped_area
144 	  non-native endianness (e.g. Little-Endian framebuffer on a
145 	  Big-Endian machine). Most probably you don't have such hardware,
153 	bool "Support for Big- and Little-Endian framebuffers"
156 	bool "Support for Big-Endian framebuffers only"
159 	bool "Support for Little-Endian framebuffers only"
180 	  Common utility functions useful to fbdev drivers of VGA-based
214 	  terms of number of tiles in the x- and y-axis.
233 	depends on FB && (ZORRO || PCI)
238 	  This enables support for Cirrus Logic GD542x/543x based boards on
241 	  If you have a PCI-based system, this enables support for these
242 	  chips: GD-543x, GD-544x, GD-5480.
251 	depends on FB && ((AMIGA && BROKEN) || PCI)
256 	  This is the frame buffer device driver for cards based on
260 		ELSA Gloria Synergy PCI
261 		Appian Jeronimo PRO (both heads) PCI
262 		3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
263 		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
271 	depends on FB_PM2 && PCI
293 	  will be called amba-clcd.
303 	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
320 	bool "SA-1100 LCD support"
326 	  This is a framebuffer device for the SA-1100 LCD Controller.
327 	  See <http://www.linux-fbdev.org/> for information on framebuffer
330 	  If you plan to use the LCD display with your SA-1100 system, say
346 	depends on FB && PCI && (BROKEN || !SPARC64)
445 	  is based on the KS-108 lcd controller and is typically a matrix
464 	depends on (FB = y) && PPC && (!PPC_PSERIES || PCI)
508 	depends on (FB = y) && PPC32 && PCI
518 	depends on (FB = y) && PCI
527 	depends on (FB = y) && PCI
531 	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
535 	tristate "VGA 16-color graphics support"
558 	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
592 	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
593 	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
594 	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
596 	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
600 	  you manage to get it going. ;-)
636 	bool "EFI-based Framebuffer Support"
695 	  Say Y if you want support for SBUS or UPA based frame buffer device.
770 	  This is the frame buffer device driver for the SBUS-based Sun ZX
774 	bool "Sun XVR-500 3DLABS Wildcat support"
775 	depends on (FB = y) && PCI && SPARC64
780 	  This is the framebuffer device for the Sun XVR-500 and similar
781 	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
787 	bool "Sun XVR-2500 3DLABS Wildcat support"
788 	depends on (FB = y) && PCI && SPARC64
793 	  This is the framebuffer device for the Sun XVR-2500 and similar
794 	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
800 	bool "Sun XVR-1000 support"
806 	  This is the framebuffer device for the Sun XVR-1000 and similar
875 	depends on FB && PCI
901 	  Because fbdev-2.6 requires that drivers must be able to
922 	depends on FB && PCI
947 	  Because fbdev-2.6 requires that drivers must be able to
968 	depends on FB && PCI
976 	  This driver supports graphics cards based on Intel740 chip.
980 	depends on FB && PCI && X86_32 && AGP_INTEL
987 	  This driver supports the on-board graphics built in to the Intel 810
1009 	  monitor is recommended, but can still work with non-compliant ones.
1031 	depends on FB && PCI && X86
1041 	depends on FB_LE80578 && FB && PCI && X86
1047 	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
1055 	  This driver supports the on-board graphics built in to the Intel
1080 	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
1084 	depends on FB && PCI
1127 	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
1139 	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
1160 	  interconnects Matrox optional devices, like MGA-TVO on G200 and
1165 	  second head of G400 or MGA-TVO on G200 or G400.
1168 	  i2c-matroxfb.
1177 	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1178 	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
1186 	  also load i2c-matroxfb to get it to run.
1190 	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1203 	depends on FB && PCI
1212 	  a framebuffer device.  There are both PCI and AGP versions.  You
1216 	  https://products.amd.com/en-us/GraphicCardResult.aspx
1243 	depends on FB && PCI
1265 	tristate "ATI Mach64 display support" if PCI || ATARI
1272 	select FB_ATY_CT if SPARC64 && PCI
1282 	depends on PCI && FB_ATY
1284 	  Say Y here to support use of ATI's 64-bit Rage boards (or other
1285 	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
1297 	bool "Mach64 GX support" if PCI
1302 	  board (or other boards based on the Mach64 GX chipset) as a
1316 	depends on FB && PCI
1337 	depends on FB && PCI
1344 	  This driver supports notebooks and computers with S3 Savage PCI/AGP
1361 	  Because fbdev-2.6 requires that drivers must be able to
1375 	depends on FB && PCI
1405 	depends on FB && PCI && GPIOLIB && I2C && (X86 || COMPILE_TEST)
1443 	depends on FB && PCI
1450 	  This driver supports notebooks with NeoMagic PCI chips.
1458 	depends on FB && PCI
1463 	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
1471 	depends on FB && PCI
1478 	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1488 	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1501 	depends on FB && PCI
1507 	  Voodoo2 (cvg) based graphics card.
1519 	depends on FB && PCI
1533 	depends on FB && PCI
1540 	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
1555 	depends on FB && PCI
1564 	  Driver for PCI graphics boards with ARK 2000PV chip
1569 	depends on FB && PCI
1581 	depends on FB && PCI
1641 	bool "Wondermedia WM8xxx-series frame buffer support"
1649 	  This is the framebuffer driver for WonderMedia WM8xxx-series
1673 	tristate "PMAG-AA TURBOchannel framebuffer support"
1679 	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1680 	  used mainly in the MIPS-based DECstation series.
1683 	tristate "PMAG-BA TURBOchannel framebuffer support"
1689 	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1690 	  used mainly in the MIPS-based DECstation series.
1693 	tristate "PMAGB-B TURBOchannel framebuffer support"
1699 	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1700 	  in the MIPS-based DECstation series. The card is currently only
1722 	  Olivetti M700-10 systems.
1731 	  Say Y here if you want to support the built-in frame buffer of
1742 	  Frame buffer driver for the built-in LCD controller in the Marvell
1754 	  Frame buffer driver for the built-in LCD controller in the Intel
1816 	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
1837 	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
1847 	  on the Sharp SL-6000 series
1869 	  Frame buffer driver for the built-in FB controller in the Samsung
1893 	  Frame buffer driver for the built-in LCD controller in the Samsung
1937 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1938 	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1953 	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1954 	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1965 	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
2031 	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
2042 	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
2079 	  This driver implements the front-end of the Xen virtual
2080 	  frame buffer driver.  It communicates with a back-end
2084 	tristate "E-Ink Metronome/8track controller support"
2092 	  This driver implements support for the E-Ink Metronome
2093 	  controller. The pre-release name for this device was 8track
2094 	  and could also have been called by some vendors as PVI-nnnn.
2099 	depends on PCI || (OF && PPC)
2104 	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
2111 	bool "Carmine/Coral-P(A) GDC"
2112 	depends on PCI
2114 	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
2115 	  PCI graphics controller devices.
2133 	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
2146 	  ep93xx-fb.
2169 	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
2177 	  This driver implements support for the E-Ink Broadsheet
2183 	tristate "Microsoft Hyper-V Synthetic Video support"
2191 	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
2200 	  Say Y if you want support for a simple frame-buffer.
2204 	  pre-allocated frame buffer surface.
2227 	depends on FB && PCI