159 #define serial_outp(up, offset, value)	serial_out(up, offset, value)  macro
199 		serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);  in __enable_rsa()
219 			serial_outp(up, UART_RSA_FRR, 0);  in enable_rsa()
242 			serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);  in disable_rsa()
402 		serial_outp(up, UART_TX, up->port.x_char);  in transmit_chars()
625 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
626 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
627 		serial_outp(up, UART_IER, 0);  in sunsu_startup()
628 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
630 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
631 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
632 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
648 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_startup()
649 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_startup()
651 		serial_outp(up, UART_FCR, 0);  in sunsu_startup()
688 	serial_outp(up, UART_LCR, UART_LCR_WLEN8);  in sunsu_startup()
703 	serial_outp(up, UART_IER, up->ier);  in sunsu_startup()
736 	serial_outp(up, UART_IER, 0);  in sunsu_shutdown()
753 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_shutdown()
756 	serial_outp(up, UART_FCR, 0);  in sunsu_shutdown()
880 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_change_speed()
881 		serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);  in sunsu_change_speed()
883 	serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */  in sunsu_change_speed()
884 	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */  in sunsu_change_speed()
885 	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */  in sunsu_change_speed()
887 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
888 	serial_outp(up, UART_LCR, cval);		/* reset DLAB */  in sunsu_change_speed()
893 			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_change_speed()
895 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
1060 		serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()
1065 		serial_outp(up, UART_IER, 0x0f);  in sunsu_autoconfig()
1070 		serial_outp(up, UART_IER, scratch);  in sunsu_autoconfig()
1088 		serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);  in sunsu_autoconfig()
1090 		serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1094 	serial_outp(up, UART_LCR, 0xBF);	/* set up for StarTech test */  in sunsu_autoconfig()
1095 	serial_outp(up, UART_EFR, 0);		/* EFR is the same as FCR */  in sunsu_autoconfig()
1096 	serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1097 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1115 		serial_outp(up, UART_LCR, UART_LCR_DLAB);  in sunsu_autoconfig()
1119 			serial_outp(up, UART_LCR, 0xBF);  in sunsu_autoconfig()
1126 		serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);  in sunsu_autoconfig()
1127 		serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1137  			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1138 			serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1139 			serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1145 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1147 	serial_outp(up, UART_LCR, save_lcr);  in sunsu_autoconfig()
1150 		serial_outp(up, UART_SCR, 0xa5);  in sunsu_autoconfig()
1152 		serial_outp(up, UART_SCR, 0x5a);  in sunsu_autoconfig()
1154 		serial_outp(up, UART_SCR, scratch);  in sunsu_autoconfig()
1171 		serial_outp(up, UART_RSA_FRR, 0);  in sunsu_autoconfig()
1173 	serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1174 	serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |  in sunsu_autoconfig()
1177 	serial_outp(up, UART_FCR, 0);  in sunsu_autoconfig()
1179 	serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()