Lines Matching +full:geni +full:- +full:uart
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
26 This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
37 Say Y here if you wish to use an AMBA PrimeCell UART as the system
53 This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
65 Say Y here if you wish to use an AMBA PrimeCell UART as the system
89 bool "Early console using RISC-V SBI"
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
129 bool "AT91 on-chip serial port support"
135 This enables the driver for the on-chip UARTs of the Atmel
143 Say Y here if you wish to use an on-chip UART on a Atmel
178 Say Y if you have an external 8250/16C550 UART. If unsure, say N.
204 This enables the driver for the on-chip UARTs of the Amlogic
213 Say Y here if you wish to use a Amlogic MesonX UART as the
224 This enables the driver for the on-chip UARTs of the Cirrus
241 Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
259 Select the number of available UART ports for the Samsung S3C
268 Allow selection of the S3C24XX on-board serial ports for use as
283 Support for the on-chip UART on the CSR SiRFprimaII series,
305 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
312 tristate "NVIDIA Tegra Combined UART"
316 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
346 This selects support for an advanced UART from Maxim (Dallas).
349 that can be controlled through I2C or high-speed SPI.
359 DZ11-family serial controllers for DECstations and VAXstations,
707 bool "Enable PNX8XXX SoCs' UART Support"
711 If you have a MIPS-based Philips SoC such as PNX8330 and you want
719 If you have a MIPS-based Philips SoC such as PNX8330 and you want
734 bool "Enable LPC32XX high speed UART serial console"
795 the pmac_zilog and 8250 drivers to co-exist, but may cause
797 access the built-in serial ports on powermacs will need to
802 unable to use the 8250 module for PCMCIA or other 16C550-style
830 Say Y here if you wish to use a SCC or SMC CPM UART as the system
950 box, for instance in order to become a dial-in server. This driver
959 tristate "MSM on-chip serial port support"
970 bool "MSM on-chip GENI HW based early console support"
974 Serial early console driver for Qualcomm Technologies Inc's GENI
978 tristate "QCOM on-chip GENI based serial port support"
984 bool "QCOM GENI Serial Console support"
989 Serial console driver for Qualcomm Technologies Inc's GENI based
993 bool "VIA VT8500 on-chip serial port support"
1011 with the omap-serial driver. DMA support can be enabled from platform
1030 tristate "SiFive UART support"
1035 contains a SiFive UART IP block. This type of UART is present on
1039 bool "Console on SiFive UART"
1044 Select this option if you would like to use a SiFive UART as the
1059 Support for UART on Lantiq and Intel SoCs.
1064 bool "Console on Lantiq UART"
1069 Select this option if you would like to use a Lantiq UART as the
1085 This selects support for an advanced UART from NXP (Philips).
1134 tristate "Support for timberdale UART"
1138 Add support for UART controller on timberdale.
1141 tristate "Broadcom BCM63xx/BCM33xx UART support"
1145 This enables the driver for the onchip UART core found on
1151 BCM7xxx (STB) - DOCSIS console
1177 tristate "Altera JTAG UART support"
1180 This driver supports the Altera JTAG UART port.
1183 bool "Altera JTAG UART console support"
1188 Enable a Altera JTAG UART port to be the system console.
1199 tristate "Altera UART support"
1202 This driver supports the Altera softcore UART port.
1205 int "Maximum number of Altera UART ports"
1210 UART ports. The usual default varies from board to board, and
1214 int "Default baudrate for Altera UART ports"
1219 Altera UART ports. The usual default varies from board to board,
1223 bool "Altera UART console support"
1228 Enable a Altera UART port to be the system console.
1238 tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
1242 This driver is for PCH(Platform controller Hub) UART of Intel EG20T
1244 Enabling PCH_DMA, this PCH UART works as DMA mode.
1248 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1254 bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH"
1258 Say Y here if you wish to use the PCH UART as the system console
1269 UART (AUART) port.
1279 tristate "Cadence (Xilinx Zynq) UART support"
1283 This driver supports the Cadence UART. It is found e.g. in Xilinx
1287 bool "Cadence UART console support"
1292 Enable a Cadence UART port to be the system console.
1301 built-in UART of the SoC, say Y to this option.
1311 Enable a built-in UART port of the AR933X to be the system console.
1322 tristate "EFM32 UART/USART port"
1326 This driver support the USART and UART ports on
1330 bool "MPS2 UART console support"
1336 bool "MPS2 UART port"
1340 This driver support the UART ports on ARM MPS2.
1343 bool "EFM32 UART/USART console support"
1348 tristate "ARC UART driver support"
1351 Driver for on-chip UART for ARC(Synopsys) for the legacy
1355 bool "Console on ARC UART"
1360 Enable system Console on ARC UART
1363 int "Number of ARC UART ports"
1400 Support for the on-chip lpuart on some Freescale SOCs.
1412 tristate "Freescale LINFlexD UART serial port support"
1416 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1419 bool "Console on Freescale LINFlexD UART serial port"
1424 If you have enabled the LINFlexD UART serial port on the Freescale
1432 Support for the on-chip USART on Conexant Digicolor SoCs.
1447 This driver is for the on-chip Asychronous Serial Controller on
1464 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1478 bool "Spreadtrum UART console support"
1494 This driver is for the on-chip Serial Controller on
1511 This driver is for Marvell EBU SoC's UART. If you have a machine
1512 based on the Armada-3700 SoC and wish to use the on-board serial
1524 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1534 This driver is for Actions Semiconductor S500/S900 SoC's UART.
1535 Say 'Y' here if you wish to use the on-board serial port.
1545 Say 'Y' here if you wish to use Actions Semiconductor S500/S900 UART
1553 This driver is for RDA8810PL SoC's UART.
1554 Say 'Y' here if you wish to use the on-board serial port.
1564 Say 'Y' here if you wish to use the RDA8810PL UART as the system
1568 tristate "Milbeaut USIO/UART serial port support"
1573 This selects the USIO/UART IP found in Socionext Milbeaut SoCs.
1576 int "Maximum number of CSIO/UART ports (1-8)"
1582 bool "Support for console on MILBEAUT USIO/UART serial port"
1588 Say 'Y' here if you wish to use a USIO/UART of Socionext Milbeaut