Lines Matching full:ports

160 	  properly when DMA is enabled. Make sure that ports where
243 	  provide all of these ports, depending on how the serial port
259 	  Select the number of available UART ports for the Samsung S3C
268 	  Allow selection of the S3C24XX on-board serial ports for use as
285 	  provide all of these ports, depending on how the serial port
307 	  provide all of these ports, depending on how the serial port
385 	  for serial ports in newer DECstation systems.  These include the
440 	  can enable its onboard serial ports by enabling this option.
550 	int "Maximum number of uartlite serial ports"
569 	  This driver supports the Zilog8530 serial ports found on many Sparc
570 	  systems.  Say Y or M if you want to be able to these serial ports.
584 	  This driver supports the 8250 serial ports that run the keyboard and
586 	  to these serial ports.
640 	  This driver supports the Siemens SAB82532 DUSCC serial ports on newer
642 	  serial ports.
664 	  This driver supports the Zilog8530 serial ports found on SGI
665 	  systems.  Say Y or M if you want to be able to these serial ports.
679 	int "Maximum number of SCI(F) serial ports" if EXPERT
712 	  to use serial ports, say Y.  Otherwise, say N.
728 	  Support for the LPC32XX high speed serial ports (up to 900kbps).
739 	  ports on the LPC32XX as the console, you can do so by answering
756 	  This serial driver supports the Freescale Coldfire serial ports.
759 	int "Default baudrate for Coldfire serial ports"
764 	  ColdFire serial ports. The usual default varies from board to board,
779 	  This driver supports the Zilog z85C30 serial ports found on
781 	  Say Y or M if you want to be able to these serial ports.
791 	  both z85C30 and 8250 type ports at the same time.
797 	  access the built-in serial ports on powermacs will need to
800 	  If you enable this option, any z85c30 ports in the system will
805 	  Say N unless you need the z85c30 ports on your (Power)Mac
822 	  This driver supports the SCC and SMC serial ports on Motorola 
846 	  If you have a PIC32, this driver supports the serial ports.
848 	  Say Y or M to use PIC32 serial ports, otherwise say N. Note that
858 	  of the serial ports.
867 	  This driver supports MPC52xx and MPC512x PSC serial ports. If you would
912 	int "Maximum number of TMPTX39XX/49XX SIO ports"
948 	  of cards which provide multiple serial ports. You would need
1008 	  can enable its onboard serial ports by enabling this option.
1078 	  This driver supports the QE serial ports on Freescale embedded
1094 	  Support for console on SCCNXP serial ports.
1104 	  This selects support for SC16IS7xx serial ports.
1205 	int "Maximum number of Altera UART ports"
1210 	  UART ports. The usual default varies from board to board, and
1214 	int "Default baudrate for Altera UART ports"
1219 	  Altera UART ports. The usual default varies from board to board,
1314 	int "Maximum number of AR933X serial ports"
1318 	  Set this to the number of serial ports you want the driver
1326 	  This driver support the USART and UART ports on
1340 	  This driver support the UART ports on ARM MPS2.
1363 	int "Number of ARC UART ports"
1368 	  Set this to the number of serial ports you want the driver
1388 	int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1392 	  If multiple cards are present, the default limit of 32 ports may
1576 	int "Maximum number of CSIO/UART ports (1-8)"