417 	u8 status;  in pqi_clear_soft_reset_status()  local
422 	status = pqi_read_soft_reset_status(ctrl_info);  in pqi_clear_soft_reset_status()
423 	status &= ~clear;  in pqi_clear_soft_reset_status()
424 	writeb(status, ctrl_info->soft_reset_status);  in pqi_clear_soft_reset_status()
571 	io_request->status = 0;  in pqi_reinit_io_request()
1402 	char *status;  in pqi_show_volume_status()  local
1409 		status = "Volume online";  in pqi_show_volume_status()
1412 		status = "Volume failed";  in pqi_show_volume_status()
1415 		status = "Volume not configured";  in pqi_show_volume_status()
1418 		status = "Volume degraded";  in pqi_show_volume_status()
1421 		status = "Volume ready for recovery operation";  in pqi_show_volume_status()
1424 		status = "Volume undergoing recovery";  in pqi_show_volume_status()
1427 		status = "Wrong physical drive was replaced";  in pqi_show_volume_status()
1430 		status = "A physical drive not properly connected";  in pqi_show_volume_status()
1433 		status = "Hardware is overheating";  in pqi_show_volume_status()
1436 		status = "Hardware has overheated";  in pqi_show_volume_status()
1439 		status = "Volume undergoing expansion";  in pqi_show_volume_status()
1442 		status = "Volume waiting for transforming volume";  in pqi_show_volume_status()
1445 		status = "Volume queued for expansion";  in pqi_show_volume_status()
1448 		status = "Volume disabled due to SCSI ID conflict";  in pqi_show_volume_status()
1451 		status = "Volume has been ejected";  in pqi_show_volume_status()
1454 		status = "Volume undergoing background erase";  in pqi_show_volume_status()
1457 		status = "Volume ready for predictive spare rebuild";  in pqi_show_volume_status()
1460 		status = "Volume undergoing rapid parity initialization";  in pqi_show_volume_status()
1463 		status = "Volume queued for rapid parity initialization";  in pqi_show_volume_status()
1466 		status = "Encrypted volume inaccessible - key not present";  in pqi_show_volume_status()
1469 		status = "Volume undergoing encryption process";  in pqi_show_volume_status()
1472 		status = "Volume undergoing encryption re-keying process";  in pqi_show_volume_status()
1475 		status = "Volume encrypted but encryption is disabled";  in pqi_show_volume_status()
1478 		status = "Volume pending migration to encrypted state";  in pqi_show_volume_status()
1481 		status = "Volume pending encryption rekeying";  in pqi_show_volume_status()
1484 		status = "Volume not supported on this controller";  in pqi_show_volume_status()
1487 		status = "Volume status not available";  in pqi_show_volume_status()
1492 		status = unknown_state_buffer;  in pqi_show_volume_status()
1499 		device->bus, device->target, device->lun, status);  in pqi_show_volume_status()
2589 	u8 status;  in pqi_wait_for_pqi_mode_ready()  local
2608 		status = readb(&pqi_registers->function_and_status_code);  in pqi_wait_for_pqi_mode_ready()
2609 		if (status == PQI_STATUS_IDLE)  in pqi_wait_for_pqi_mode_ready()
2676 	scsi_status = error_info->status;  in pqi_process_raid_io_error()
2780 		scsi_status = error_info->status;  in pqi_process_aio_io_error()
2783 		switch (error_info->status) {  in pqi_process_aio_io_error()
2802 			io_request->status = -EAGAIN;  in pqi_process_aio_io_error()
2945 			io_request->status =  in pqi_process_io_intr()
2948 					response)->status);  in pqi_process_io_intr()
2951 			io_request->status =  in pqi_process_io_intr()
2957 			io_request->status = -EAGAIN;  in pqi_process_io_intr()
3074 	u8 status;  in pqi_poll_for_soft_reset_status()  local
3079 		status = pqi_read_soft_reset_status(ctrl_info);  in pqi_poll_for_soft_reset_status()
3080 		if (status & PQI_SOFT_RESET_INITIATE)  in pqi_poll_for_soft_reset_status()
3083 		if (status & PQI_SOFT_RESET_ABORT)  in pqi_poll_for_soft_reset_status()
3135 	enum pqi_soft_reset_status status;  in pqi_ofa_process_event()  local
3148 			status = pqi_poll_for_soft_reset_status(ctrl_info);  in pqi_ofa_process_event()
3149 			pqi_process_soft_reset(ctrl_info, status);  in pqi_ofa_process_event()
3780 	u8 status;  in pqi_create_admin_queues()  local
3804 		status = readb(&pqi_registers->function_and_status_code);  in pqi_create_admin_queues()
3805 		if (status == PQI_STATUS_IDLE)  in pqi_create_admin_queues()
4010 		if (error_info->status == SAM_STAT_GOOD)  in pqi_process_raid_io_error_synchronous()
4014 		if (error_info->status == SAM_STAT_GOOD ||  in pqi_process_raid_io_error_synchronous()
4015 			error_info->status == SAM_STAT_CHECK_CONDITION)  in pqi_process_raid_io_error_synchronous()
4145 	if (response->status != PQI_GENERAL_ADMIN_STATUS_SUCCESS)  in pqi_validate_admin_response()
4208 	if (response.status != PQI_GENERAL_ADMIN_STATUS_SUCCESS) {  in pqi_report_device_capability()
5207 	if (io_request->status == -EAGAIN)  in pqi_aio_io_complete()
5688 		rc = io_request->status;  in pqi_lun_reset()
5978 	ciss_error_info->scsi_status = pqi_error_info->status;  in pqi_error_info_to_ciss()
7901 	.status = SAM_STAT_CHECK_CONDITION,
7919 			io_request->status = -ENXIO;  in pqi_fail_all_outstanding_requests()
8789 		status) != 0x0);  in verify_structures()
8813 		status) != 0x5);  in verify_structures()
8945 		status) != 11);  in verify_structures()