1124 	mr = BIT_3 | BIT_2 | BIT_1 | BIT_0;  in qla1280_set_target_parameters()
1198 	    (ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {  in qla1280_slave_configure()
1690 		err = qla1280_mailbox_command(ha, BIT_0 | BIT_1 | BIT_2, mb);  in qla1280_load_firmware_pio()
1704 #define CMD_ARGS	(BIT_7 | BIT_6 | BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
1708 #define CMD_ARGS	(BIT_4 | BIT_3 | BIT_2 | BIT_1 | BIT_0)
1832 	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_start_firmware()
1842 	err = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);  in qla1280_start_firmware()
1909 					       BIT_3 | BIT_2 | BIT_1 | BIT_0,  in qla1280_init_rings()
1923 						 BIT_3 | BIT_2 | BIT_1 | BIT_0,  in qla1280_init_rings()
2097 	flag = (BIT_0 << target);  in qla1280_config_target()
2143 	status = qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);  in qla1280_config_bus()
2216 			     BIT_7 | BIT_3 | BIT_2 | BIT_1 | BIT_0);  in qla1280_nvram_config()
2228 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, &mb[0]);  in qla1280_nvram_config()
2234 	 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2242 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2251 					  BIT_1 | BIT_0, &mb[0]);  in qla1280_nvram_config()
2257 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);  in qla1280_nvram_config()
2271 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2275 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2281 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2285 	status |= qla1280_mailbox_command(ha, BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2291 	status |= qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, mb);  in qla1280_nvram_config()
2374 			data |= BIT_0;  in qla1280_nvram_request()
2445 		if (mr & BIT_0) {  in qla1280_mailbox_command()
2563 	status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);  in qla1280_bus_reset()
2617 	status = qla1280_mailbox_command(ha, BIT_2 | BIT_1 | BIT_0, &mb[0]);  in qla1280_device_reset()
3367 	if (mailbox[0] & BIT_0) {  in qla1280_isr()
3430 			index = mailbox[6] & BIT_0;  in qla1280_isr()
3468 			index = mailbox[6] & BIT_0;  in qla1280_isr()
3903 	qla1280_mailbox_command(ha, BIT_6 | BIT_3 | BIT_2 | BIT_1 | BIT_0,  in qla1280_get_target_parameters()