scsi/aic7xxx/aic79xx.seq

60 		 * Convert ERROR status into a sequencer
128 		 * and re-selections.  Make the LED status
149 	 * We have received good status for this transaction.  There may
169 	 * Since this status did not consume a FIFO, we have to
185 	 * notice that status has been received and complete the SCB.
222 	 * bad SCSI status (currently only for underruns), we
622 		 * and re-selections.  Make the LED status
637 		 * any stale busfree status.  This avoids
675 		 * and re-selections.  Make the LED status
823 		 * any stale busfree status.  This avoids
1172  * so, check to see if there is a residual or the status byte is something
1191 	 * any status will do.  Optimize this fast path.
1203 	 * If we recevied good status but never successfully sent the
1312 		 * busfree status was cleared at the
1329 	 * We only set BUSFREE status once either a new
1871 		 * Rev A.  Snapshot LQISTAT2 so the status is not missed
1882 		 * FIFO.  This status is the only way we can detect if we
2029  * prior to clearing this status and executing the common code for
2061  * LAST_SEG_DONE status has been seen in the current FIFO.
2094 	 * If status has been received, it is safe to skip
2117  * Watch over the status transfer.  Our host sense buffer is
2118  * large enough to take the maximum allowed status packet.
2121  * phases that are typically caused by CRC errors in status packet
2174 	 * turns out that the status handler doesn't need a references
2175 	 * count since the status received flag, and thus completion
2184  * Nonpackreq is a polled status.  It can come true in three situations:
2219 		 * any stale busfree status.  This avoids