Lines Matching +full:chip +full:- +full:select
1 # SPDX-License-Identifier: GPL-2.0-only
11 select RTC_LIB
17 select RTC_LIB
44 This clock should be battery-backed, so that it reads the correct
45 time when the system boots from a power-off state. Otherwise, your
80 select NVMEM
130 Provides an emulation for RTC_UIE if the underlying rtc chip
132 once-per-second update interrupts, used for synchronization.
150 will be called rtc-test.
164 will be called rtc-88pm860x.
174 will be called rtc-88pm80x.
177 select REGMAP_I2C
178 tristate "Abracon AB-RTCMC-32.768kHz-B5ZE-S3"
181 AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip.
184 will be called rtc-ab-b5ze-s3.
187 select REGMAP_I2C
188 tristate "Abracon AB-RTCMC-32.768kHz-EOZ9"
191 AB-RTCMC-32.768kHz-EOA9 I2C RTC chip.
194 will be called rtc-ab-e0z9.
198 select WATCHDOG_CORE if WATCHDOG
201 families of ultra-low-power battery- and capacitor-backed real-time
205 will be called rtc-abx80x.
208 tristate "X-Powers AC100"
211 If you say yes here you get support for the real-time clock found
212 in X-Powers AC100 family peripheral ICs.
215 will be called rtc-ac100.
218 tristate "Broadcom STB wake-timer"
222 If you say yes here you get support for the wake-timer found on
226 be called rtc-brcmstb-waketimer.
236 will be called rtc-as3722.
239 tristate "Dallas/Maxim DS1307/37/38/39/40/41, ST M41T00, EPSON RX-8025, ISL12057"
240 select REGMAP_I2C
241 select WATCHDOG_CORE if WATCHDOG
246 ST M41T00, EPSON RX-8025, Intersil ISL12057 and probably other chips.
253 sysfs, but other chip features may not be available.
256 will be called rtc-ds1307.
259 bool "Century bit support for rtc-ds1307"
276 DS1374 real-time clock chips. If an interrupt is associated
280 will be called rtc-ds1374.
285 select WATCHDOG_CORE
289 real-time clock chips.
295 Dallas/Maxim DS1672 timekeeping chip.
298 will be called rtc-ds1672.
304 Say Y to enable support for the HYM8563 I2C RTC chip. Apart
309 will be called rtc-hym8563.
321 Maxim MAX6900 I2C RTC chip.
324 will be called rtc-max6900.
329 select REGMAP_IRQ
335 will be called rtc-max8907.
345 will be called rtc-max8925.
355 will be called rtc-max8998.
365 will be called rtc-max8997.
375 will be called rtc-max77686.
385 will be called rk808-rtc.
395 will be called rtc-rockchip.
404 will be called rtc-rs5c372.
410 Intersil ISL1208 RTC chip.
413 will be called rtc-isl1208.
419 Intersil ISL12022 RTC chip.
422 will be called rtc-isl12022.
429 Intersil ISL12026 RTC chip.
432 will be called rtc-isl12026.
438 Xicor/Intersil X1205 RTC chip.
441 will be called rtc-x1205.
450 will be called rtc-pcf8523.
454 select REGMAP_I2C
456 If you say yes here you get support for the PCF85063 RTC chip
459 will be called rtc-pcf85063.
463 select REGMAP_I2C
465 If you say yes here you get support for the PCF85363 RTC chip.
468 will be called rtc-pcf85363.
470 The nvmem interface will be named pcf85363-#, where # is the
471 zero-based instance number.
477 Philips PCF8563 RTC chip. The Epson RTC8564
481 will be called rtc-pcf8563.
487 RTC chip found on Acorn RiscPCs. This driver supports the
490 chip, but the year will probably have to be tweaked.
493 will be called rtc-pcf8583.
504 will be called rtc-m41t80.
521 will be called rtc-bd70528.
527 BQ32000 I2C RTC chip.
530 will be called rtc-bq32k.
543 TWL92330 "Menelaus" power management chip, used with OMAP2
556 will be called rtc-twl.
566 will be called rtc-palma.
584 will be called rtc-tps65910.
602 will be called rtc-rc5t583.
612 will be called rtc-rc5t619.
615 tristate "Seiko Instruments S-35390A"
616 select BITREVERSE
619 Instruments S-35390A.
622 will be called rtc-s35390a.
629 Ramtron FM3130 is a chip with two separate devices inside,
633 will be called rtc-fm3130.
637 select REGMAP_I2C
640 chip.
643 will be called rtc-rx8010.
646 tristate "Epson RX-8571/RX-8581"
647 select REGMAP_I2C
649 If you say yes here you will get support for the Epson RX-8571/
650 RX-8581.
653 will be called rtc-rx8581.
656 tristate "Epson RX-8025SA/NB"
659 RX-8025SA/NB RTC chips.
662 will be called rtc-rx8025.
671 will be called rtc-em3027.
675 select REGMAP_I2C
681 will be called rtc-rv3028.
685 select REGMAP_I2C
691 will be called rtc-rv3032.
700 will be called rtc-rv8803.
705 select REGMAP_IRQ
706 select REGMAP_I2C
712 will be called rtc-s5m.
716 select REGMAP_I2C
722 will be called rtc-sd3078
734 ST M41T93 SPI RTC chip.
737 will be called rtc-m41t93.
743 ST M41T94 SPI RTC chip.
746 will be called rtc-m41t94.
755 will be called rtc-ds1302.
760 Select this driver to get support for the Dallas/Maxim DS1305
765 will be called rtc-ds1305.
768 select REGMAP_SPI
776 will be called rtc-ds1343.
779 select REGMAP_SPI
785 This driver only supports the RTC feature, and not other chip
789 will be called rtc-ds1347.
798 other chip features such as alarms.
801 will be called rtc-ds1390.
807 Maxim MAX6916 SPI RTC chip.
809 This driver only supports the RTC feature, and not other chip
813 will be called rtc-max6916.
816 tristate "Epson RTC-9701JE"
819 Epson RTC-9701JE SPI RTC chip.
822 will be called rtc-r9701.
825 tristate "Epson RX-4581"
827 If you say yes here you will get support for the Epson RX-4581.
830 will be called rtc-rx4581.
833 tristate "Epson RX-6110"
834 select REGMAP_SPI
836 If you say yes here you will get support for the Epson RX-6610.
839 will be called rtc-rx6110.
848 will be called rtc-rs5c348.
854 Maxim MAX6902 SPI RTC chip.
857 will be called rtc-max6902.
861 select REGMAP_SPI
864 RTC chip.
867 will be called rtc-pcf2123.
875 will be called rtc-mcp795.
894 select REGMAP_I2C if I2C
895 select REGMAP_SPI if SPI_MASTER
898 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
902 will be called rtc-ds3232.
910 rtc-ds3232
915 select REGMAP_I2C if I2C
916 select REGMAP_SPI if SPI_MASTER
917 select WATCHDOG_CORE if WATCHDOG
928 will be called rtc-pcf2127.
933 select REGMAP_I2C if I2C
934 select REGMAP_SPI if SPI_MASTER
940 will be called rtc-rv3029c2.
949 rtc-rv3029.
958 tristate "PC-style 'CMOS'"
961 select RTC_MC146818_LIB
964 found in every PC or ACPI-based system, and some other boards.
975 will be called rtc-cmos.
978 bool "Alpha PC-style CMOS"
980 select RTC_MC146818_LIB
983 Direct support for the real-time clock found on every Alpha
1015 Dallas DS1511 timekeeping/watchdog chip.
1018 will be called rtc-ds1511.
1025 Maxim/Dallas DS1553 timekeeping chip.
1028 will be called rtc-ds1553.
1039 will be called rtc-ds1685.
1050 clock chip.
1052 This chip is commonly found in SGI O2 (IP32) and SGI Octane (IP30)
1053 systems, as well as EPPC-405-UC modules by electronic system design
1060 clock chip.
1062 This is an older RTC chip, supplanted by the DS1685/DS1687 above,
1064 Cycle counters, plus a customer-specific, 8-byte ROM/Serial number.
1074 clock chip.
1076 This chip features 2kb of extended NV-SRAM. It may possibly be
1083 clock chip.
1085 This chip features 4kb of extended NV-SRAM.
1091 clock chip.
1093 This chip features 8kb of extended NV-SRAM.
1102 Maxim/Dallas DS1742/1743 timekeeping chip.
1105 will be called rtc-ds1742.
1111 Dallas DS2404 RTC chip.
1114 will be called rtc-ds2404.
1121 DA9052-BC and DA9053-AA/Bx PMICs.
1131 will be called rtc-da9055
1141 will be called "rtc-da9063".
1151 will be called rtc-efi.
1158 Simtek STK17TA8 timekeeping chip.
1161 will be called rtc-stk17ta8.
1170 will be called rtc-m48t86.
1177 ST M48T35 RTC chip.
1180 will be called "rtc-m48t35".
1187 ST M48T59 RTC chip and compatible ST M48T08 and M48T02.
1193 will be called "rtc-m48t59".
1200 timekeeping chip. It is used in some Amiga models (e.g. A2000).
1203 will be called rtc-msm6242.
1210 BQ4802 RTC chip.
1213 will be called rtc-bq4802.
1220 timekeeping chip. It is used in some Amiga models (e.g. A3000
1224 will be called rtc-rp5c01.
1230 EM Microelectronic v3020 RTC chip.
1233 will be called rtc-v3020.
1243 will be called "rtc-wm831x".
1253 will be called "rtc-wm8350".
1264 will be called rtc-sc27xx.
1282 tristate "ST-Ericsson AB3100 RTC"
1286 Select this to enable the ST-Ericsson AB3100 Mixed Signal IC RTC
1287 support. This chip contains a battery- and capacitor-backed RTC.
1290 tristate "ST-Ericsson AB8500 RTC"
1292 select RTC_INTF_DEV
1293 select RTC_INTF_DEV_UIE_EMUL
1295 Select this to enable the ST-Ericsson AB8500 power management IC RTC
1296 support. This chip contains a battery- and capacitor-backed RTC.
1307 will be called rtc-opal.
1324 will be called rtc-cros-ec.
1326 comment "on-CPU RTC drivers"
1336 will be called rtc-asm9260.
1346 will be called rtc-davinci.
1356 will be called rtc-digicolor.
1365 will be called "rtc-imxdi".
1378 will be called "rtc-fsl-ftm-alarm".
1383 select REGMAP_MMIO
1389 will be called "rtc-meson".
1400 will be called rtc-meson-vrtc.
1407 select GENERIC_PINCONF
1409 Say "yes" here to support the on chip real time clock
1410 present on TI OMAP1, AM33xx, DA8xx/OMAP-L13x, AM43xx and DRA7xx.
1413 will be called rtc-omap.
1420 select this in the respective mach-XXXX/Kconfig file.
1436 will be called rtc-s3c.
1446 will be called rtc-ep93xx.
1456 module will be called rtc-sa1100.
1459 tristate "SuperH On-Chip RTC"
1462 Say Y here to enable support for the on-chip RTC found in
1466 module will be called rtc-sh.
1476 module will be called rtc-vr41xx.
1486 module will be called rtc-pl030.
1496 module will be called rtc-pl031.
1511 select MFD_SYSCON
1526 This is a driver for the Au1xxx on-chip Counter0 (Time-Of-Year
1530 will be called rtc-au1xxx.
1551 select RTC_DRV_SA1100
1609 If you say yes here you will get support for the in-chip RTC
1614 will be called rtc-mv.
1620 If you say yes here you will get support for the in-chip RTC
1624 will be called armada38x-rtc.
1634 module will be called rtc-cadence.
1645 will be called rtc-ftrtc010.
1654 will be called rtc-ps3.
1657 tristate "ST-Ericsson COH 901 331 RTC"
1660 If you say Y here you will get access to ST-Ericsson
1661 COH 901 331 RTC clock found in some ST-Ericsson Mobile
1665 will be called "rtc-coh901331".
1671 select STMP_DEVICE
1677 will be called rtc-stmp3xxx.
1694 tristate "Freescale MPC5121 built-in RTC"
1698 built-in RTC on MPC5121 or on MPC5200.
1701 will be called rtc-mpc5121.
1712 will be called rtc-jz4740.
1724 so, the module will be called rtc-lpc24xx.
1733 will be called rtc-lpc32xx.
1743 module will be called rtc-pm8xxx.
1753 will be called rtc-tegra.
1759 This is a driver for the loongson1 on-chip Counter0 (Time-Of-Year
1763 will be called rtc-ls1x.
1773 will be called "rtc-mxc".
1783 will be called "rtc-mxc_v2".
1787 select REGMAP_MMIO
1796 will be called "rtc-snvs".
1811 This driver can also be built as a module called rtc-sirfsoc.
1822 module will be called rtc-st-lpc.
1832 will be called rtc-moxart
1842 will be called rtc-mt2712.
1849 MT6397 PMIC. You should enable MT6397 PMIC MFD before select
1852 If you want to use MediaTek(R) RTC interface, select Y or M here.
1862 will be called rtc-mt7622.
1865 tristate "APM X-Gene RTC"
1869 If you say yes here you get support for the APM X-Gene SoC real time
1873 will be called "rtc-xgene".
1883 will be called rtc-pic32
1886 tristate "EPSON TOYOCOM RTC-7301SF/DG"
1887 select REGMAP_MMIO
1891 RTC-7301SF/DG chips.
1894 will be called rtc-r7301.
1898 select REGMAP_MMIO
1901 If you say yes here you get support for the STM32 On-Chip
1905 will be called "rtc-stm32".
1931 will be called "rtc-aspeed".
1939 select HID_SENSOR_IIO_COMMON
1945 rtc-hid-sensor-time.