419 	 * other type of charging.  in ab8500_power_supply_changed()
452 		 * USB charging and no psy has been created, but we still  in ab8500_charger_set_usb_connected()
701 	 * This means that charging current from USB source  in ab8500_charger_max_usb_curr()
769 		dev_err(di->dev, "USB Type - Charging not allowed\n");  in ab8500_charger_max_usb_curr()
781 			dev_dbg(di->dev, "USB Type - Charging not allowed\n");  in ab8500_charger_max_usb_curr()
799 		dev_err(di->dev, "USB Type invalid - try charging anyway\n");  in ab8500_charger_max_usb_curr()
1073  * to the register. Returns -1 if charging is not allowed
1130  * charging is started. Instead we need to implement
1327  * Power ON/OFF charging LED indication
1335 		/* Power ON charging LED indicator, set LED current to 5mA */  in ab8500_charger_led_en()
1352 		/* Power off charging LED indicator */  in ab8500_charger_led_en()
1366  * ab8500_charger_ac_en() - enable or disable ac charging
1369  * @vset:	charging voltage
1370  * @iset:	charging current
1372  * Enable/Disable AC/Mains charging and turns on/off the charging led
1393 		/* Enable AC charging */  in ab8500_charger_ac_en()
1399 		 * This will turn off charging for a short while.  in ab8500_charger_ac_en()
1423 				"charging not started\n");  in ab8500_charger_ac_en()
1427 		/* ChVoltLevel: maximum battery charging voltage */  in ab8500_charger_ac_en()
1463 		/* Power on charging LED indication */  in ab8500_charger_ac_en()
1470 		/* Disable AC charging */  in ab8500_charger_ac_en()
1489 			 * We can't turn off charging completely  in ab8500_charger_ac_en()
1491 			 * If we do, charging will not start again.  in ab8500_charger_ac_en()
1535 		dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);  in ab8500_charger_ac_en()
1543  * ab8500_charger_usb_en() - enable usb charging
1546  * @vset:	charging voltage
1549  * Enable/Disable USB charging and turns on/off the charging led respectively.
1572 		 * This will turn off charging for a short while.  in ab8500_charger_usb_en()
1588 		/* Enable USB charging */  in ab8500_charger_usb_en()
1597 				"charging not started\n");  in ab8500_charger_usb_en()
1625 		/* If success power on charging LED indication */  in ab8500_charger_usb_en()
1652 		/* Disable USB charging */  in ab8500_charger_usb_en()
1653 		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);  in ab8500_charger_usb_en()
1690 		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);  in ab8500_charger_usb_en()
1725  * ab8500_charger_usb_check_enable() - enable usb charging
1727  * @vset:	charging voltage
1753 		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");  in ab8500_charger_usb_check_enable()
1774  * ab8500_charger_ac_check_enable() - enable usb charging
1776  * @vset:	charging voltage
1802 		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");  in ab8500_charger_ac_check_enable()
1939  * charger when charging with at some specific levels. This issue is only valid
2283 	 * to start the charging process. but by jumping  in ab8500_charger_usb_link_status_work()
2426 		 * of 1sec for enabling charging  in ab8500_charger_usb_state_changed_work()
2432 		 * USB is configured, enable charging with the charging  in ab8500_charger_usb_state_changed_work()
2825 	 * needs to be restarted for charging to start again  in ab8500_charger_chwdexp_handler()
2893  * online:     ac/mains charging is in progress or not
2960  * online:     usb charging is in progress or not
3034  * charging of the backup battery
3144 		dev_err(di->dev, "failed to setup backup battery charging\n");  in ab8500_charger_init_hw_registers()
3148 	/* Enable backup battery charging */  in ab8500_charger_init_hw_registers()
3305 	/* Disable AC charging */  in ab8500_charger_remove()
3308 	/* Disable USB charging */  in ab8500_charger_remove()
3543 	 * interrupts during charging  in ab8500_charger_probe()