Lines Matching refs:PCMCIA
3 # PCCARD (PCMCIA/CardBus) bus subsystem configuration
7 tristate "PCCard (PCMCIA/CardBus) support"
10 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
13 actually two varieties of these cards: 16 bit PCMCIA and 32 bit
21 config PCMCIA config
22 tristate "16-bit PCMCIA support"
26 This option enables support for 16-bit PCMCIA cards. Most older
27 PC-cards are such 16-bit PCMCIA cards, so unless you know you're
30 To use 16-bit PCMCIA cards, you will need supporting software in
41 depends on PCMCIA
45 Some PCMCIA cards require an updated Card Information Structure (CIS)
59 for 32 bit PC-cards (the original PCMCIA standard specifies only
63 bridge. Virtually all modern PCMCIA bridges do this, and most of
77 select PCCARD_NONSTATIC if PCMCIA != n
80 all modern PCMCIA bridges are CardBus compatible. A "bridge" is
81 the hardware inside your computer that PCMCIA cards are plugged
116 depends on PCMCIA && PCI
119 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge
120 device, found in some older laptops and PCMCIA card readers.
124 depends on PCMCIA && PCI
127 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device,
133 depends on PCMCIA && ISA
136 Say Y here to include support for ISA-bus PCMCIA host bridges that
139 "bridge" is the hardware inside your computer that PCMCIA cards are
144 depends on PCMCIA && ISA
147 Say Y here to include support for the Databook TCIC family of PCMCIA
150 PCMCIA cards are plugged into. If unsure, say N.
153 tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
154 depends on MIPS_DB1XXX && PCMCIA
156 Enable this driver of you want PCMCIA support on your Alchemy
163 tristate "MyCable XXS1500 PCMCIA socket support"
164 depends on PCMCIA && MIPS_XXS1500
166 Support for the PCMCIA/CF socket interface on MyCable XXS1500
173 depends on BCM63XX && PCMCIA
183 depends on ARM && ARCH_SA1100 && PCMCIA
187 Say Y here to include support for SA11x0-based PCMCIA or CF
195 depends on ARM && SA1111 && PCMCIA
202 Say Y here to include support for SA1111-based PCMCIA or CF
210 depends on ARM && ARCH_PXA && PCMCIA
219 Say Y here to include support for the PXA2xx PCMCIA controller
225 Say Y here to enable debugging for the SoC PCMCIA layer.
245 depends on CPU_VR41XX && ISA && PCMCIA
249 depends on CPU_VR41XX && PCI && PCMCIA
253 depends on PCMCIA && ARCH_OMAP16XX
261 depends on PCMCIA && ARCH_AT91
268 depends on PCMCIA && PPC_PASEMI