Lines Matching refs:dBm

113 	  When low power mode is enabled, the output power will be clipped at ~+10dBm and the
372 	Power       (0 to 24 dBm)
382     Tx Power    (-11 to 9 dBm)
4671         [rssi_threshold]  : weak RSSI pkt threshold in dBm (absolute value)
4678             - Enable rx abort and set weak RSSI Threshold to -60 dBm
4680             - Enable rx abort and set weak RSSI Threshold to -40 dBm
4688     this threshold. Default margin is set to -10 dBm. Ceiling rssi threshold
4689     can be changed by specifying. Default ceil is set to -70 dBm.
4702         [margin]          : rssi margin in dBm (absolute val)
4704         [ceil_thresh]     : ceiling weak RSSI pkt threshold in dBm
4711             - Enable dynamic rx abort, set margin to -10 dBm and set ceil
4712               RSSI Threshold to -60 dBm
4714             - Enable dynamic rx abort, set margin to -5 dBm and set ceil
4715               RSSI Threshold to -50 dBm
4794     dBm. In dynamic and enhanced modes, cck desense will be turned on only in
4819         [margin]           : rssi margin in dBm (absolute val)
4821         [ceil_thresh]      : ceiling weak RSSI pkt threshold in dBm
4832             - Set dynamic mode, margin to -10 dBm and ceil RSSI Threshold to
4833               -70 dBm
4835             - Set dynamic enhanced mode, margin to -10 dBm, ceil RSSI Threshold
4836               to -60 dBm, num on intervals to 30 and num off intervals to 5.
4838             - Set dynamic mode, margin to -10 dBm and ceil RSSI Threshold to
4839               -50 dBm
4841             - Set dynamic enhanced mode, set margin to -5 dBm, set ceil RSSI
4842               Threshold to -60 dBm, and retain previous num on/off intervals