Lines Matching refs:association

1177 		2: configuration of VHT capabilities for association (STA only)
1179 	Note: For the STA, the VHT capabilities configuration is applied in association,
1189 	If <txrx> is 2 (association),
1195 	<vhtcap> - This parameter specifies the VHT capabilities info if <txrx> is 2 (association)
1197 		   The VHT Tx operation should be a subset of VHT capabilities for association.
1403 	next association. (as HTCapInfo is sent only during Association).
1474 	1) The data rate can be set only after association.
1901 	valid after association as before association there is no rate info.
1904 			association). This feature is enabled by default by the driver during
2002 		                   driver will auto retry if association failed;
2010 		                             authentication/association while reconnecting
2055 	Request an association to a given SSID/BSSID pair. This the only accurate
2056 	way to pick a specific AP and ESS for an association. The entry must
2057 	already exist in the scan table for the association to be attempted.
2550 	Note: The configurations can be set only before association.
2551 	      For get, the configurations will be returned before association
2552 	      and the current status will be returned after association.
2693 	   current association (if any).
3022 	The setting only takes effect in next association.
3473 	   should be provided after association.
3695 	This command is used to turn on/off re-association in driver.
3705 		mlanutl mlan0 reassoctrl         : Get re-association status
3706 		mlanutl mlan0 reassoctrl 1       : Turn re-association on
3711 	and association.
4592     The command needs to be issued before association.