Lines Matching refs:aggregation

1069 		   values between 0 - 7, 0xff to disable aggregation.
1071 		   values between 0 - 7, 0xff to disable aggregation.
1846 		No AMSDU aggregation.
1851 			a	8K aggregation size (if TX buffer size is 8K)
1852 			b	4K aggregation size (if TX buffer size is 4K)
1853 			c	2K aggregation size (if TX buffer size is 2K)
1856 			a	4K aggregation size (if TX buffer size is 8K/4K)
1857 			b	2K aggregation size (if TX buffer size is 2K)
1860 			a	No aggregation
1864 			a	8K aggregation size (if TX buffer size is 8K)
1865 			b	4K aggregation size (if TX buffer size is 4K)
1866 			c	2K aggregation size (if TX buffer size is 2K)
1869 			a	4K aggregation size (if TX buffer size is 8K/4K)
1870 			b	2K aggregation size (if TX buffer size is 2K)
1873 			a	No aggregation
1878 			a	8K aggregation size (if TX buffer size is 8K)
1879 			b	4K aggregation size (if TX buffer size is 4K)
1880 			c	2K aggregation size (if TX buffer size is 2K)
1883 			a	No aggregation
1887 			a	8K aggregation size (if TX buffer size is 8K)
1888 			b	4K aggregation size (if TX buffer size is 4K)
1889 			c	2K aggregation size (if TX buffer size is 2K)
1892 			a	No aggregation
3325 	This command is used to set/get the Tx, Rx SDIO aggregation parameters.
3343 		mlanutl mlan0 mpactrl       : Get MP aggregation parameters
3345 		                           : Disable MP aggregation for Tx, Rx respectively
3347 		                           : Enable MP aggregation for Tx, Rx
4258 	This command is used to set/get aggregation parameters.
4264 		[l]: Enable (1) or disable (0) Tx aggregation
4267 		mlanutl mlan0 aggrctrl                              : Display aggregation configurations
4268 		mlanutl mlan0 aggrctrl 0                            : Disable Tx aggregation
4269 		mlanutl mlan0 aggrctrl 1                            : Enable Tx aggregation
4272 	This command is used to set/get USB aggregation parameters.
4278 		[l]: Enable (1) or disable (0) Tx aggregation
4279 		[m]: Enable (1) or disable (0) Rx aggregation
4280 		[n]: Tx aggregation max size/number
4281 		     For number based aggregation, the values supported are
4283 		     For size based aggregation, the number supported are
4285 		[o]: Rx aggregation max size/number
4290 		[p]: Tx aggregation alignment
4292 		[q]: Rx aggregation alignment
4294 		[r]: Tx aggregation timeout
4297 		[s]: Rx aggregation timeout
4301 		mlanutl mlan0 usbaggrctrl                           : Display USB aggregation configurations
4302 		mlanutl mlan0 usbaggrctrl 0 0                       : Disable both Tx and Rx aggregation
4303 		mlanutl mlan0 usbaggrctrl 1 1 4 8 2048 512 1000 200 : Enable both Tx and Rx aggregation
5010     This command gets or sets the configuration of multicast packet aggregation.
5017              Bit 0: MC aggregation
5022              Bit 0: MC aggregation
5027             mlanutl uap0 mc_aggr_cfg 1 1                    Enable MC aggregation
5028 …mlanutl uap0 mc_aggr_cfg 7 7                    Enable MC aggregation,Packet expiry,CTS2Self featu…
5029 …        mlanutl uap0 mc_aggr_cfg                        Query current MC aggregation configuration.