Lines Matching refs:DFS
2152 This command is used to enable/disable DFS offload. The valid value is 0/1.
2162 mlanutl uap0 dfs_offload 1 : enable DFS offload
2163 mlanutl uap0 dfs_offload 0 : disable DFS offload
2409 This command is used to set/get settings for DFS testing.
2452 This command was the DFS test command to trigger fake radar event.
2471 This command is used to get/set DFS Repeater mode.
2493 <channel> 5G DFS channel to monitor for radar, when channel=0, stop CAC.
2507 This command is used to start/stop auto zero DFS
2513 mlanutl dfs0 autodfs 0 : stop Auto Zero DFS
2514 mlanutl dfs0 autodfs 1 config/autodfs.conf : start Auto Zero DFS
2517 This command is used to set/get settings for DFS W53 configuration for JP-DFS.
2523 <n> user-configured value for DFS W53 configuration for JP-DFS
2538 <n> user-configured value for DFS mode in driver
2539 0 - driver default DFS mode
2540 1 - driver disable DFS master when AP and STA operate in same DFS channel
2543 mlanutl uap0 dfs_mode : get DFS mode configuration
2544 mlanutl uap0 dfs_mode 1 : set DFS mode to 1
2545 mlanutl uap0 dfs_mode 0 : set DFS mode to 0