348       DBG( "Unable to allocate buffer\n" );  in QuecPrintHex()
361          DBG( "snprintf error %d\n", status );  in QuecPrintHex()
367    DBG( "   : %s\n", pPrintBuf );  in QuecPrintHex()
392    DBG("%s reason=%d, mDownReason=%x\n", __func__, reason, (unsigned)pDev->mDownReason);  in QuecGobiSetDownReason()
424    DBG("%s reason=%d, mDownReason=%x\n", __func__, reason, (unsigned)pDev->mDownReason);  in QuecGobiClearDownReason()
511       DBG( "Error re-submitting Int URB %d\n", status );  in ResubmitIntURB()
524    DBG( "%s called \n", __func__ );  in MergeRecQmiMsg()
590       DBG( "bad read URB\n" );  in ReadCallback()
597       DBG( "Invalid device!\n" );  in ReadCallback()
609       DBG( "Read status = %d\n", pReadURB->status );  in ReadCallback()
616    DBG( "Read %d bytes\n", pReadURB->actual_length );  in ReadCallback()
621       DBG( "not a full packet, read again\n");  in ReadCallback()
646       DBG( "Read error parsing QMUX %d\n", result );  in ReadCallback()
659       DBG( "Data buffer too small to parse\n" );  in ReadCallback()
693             DBG( "Error allocating client data memory\n" );  in ReadCallback()
712             DBG( "Error allocating pReadMemListEntry "  in ReadCallback()
784       DBG( "Invalid device!\n" );
791         DBG( "IntCallback: Int status = %d\n", pIntURB->status );
825             DBG("Error submitting Read URB %d\n", status);
836              DBG( "IntCallback: Connection Speed Change = 0x%llx\n",
844               DBG( "traffic stopping due to CONNECTION_SPEED_CHANGE\n" );
849               DBG( "resuming traffic due to CONNECTION_SPEED_CHANGE\n" );
855              DBG( "ignoring invalid interrupt in packet\n" );
908       DBG( "Invalid device!\n" );
916       DBG( "Error allocating read urb\n" );
927       DBG( "Error allocating int urb\n" );
937       DBG( "Error allocating read buffer\n" );
948       DBG( "Error allocating int buffer\n" );
962       DBG( "Error allocating setup packet buffer\n" );
985       DBG( "Invalid interrupt endpoint!\n" );
1003       DBG( "Error allocating qmi msg merge packet buffer!\n" );
1059       DBG( "Killng read URB\n" );
1065       DBG( "Killng int URB\n" );
1127       DBG( "Invalid device!\n" );
1138       DBG( "Could not find matching client ID 0x%04X\n",
1175       DBG( "Unable to register for notification\n" );
1257       DBG( "Invalid device!\n" );
1268       DBG( "Could not find matching client ID 0x%04X\n",
1295          DBG( "unable to register for notification\n" );
1312          DBG( "Down Timeout %d\n", result );
1342          DBG( "Invalid device!\n" );
1380       DBG( "null urb\n" );
1384    DBG( "Write status/size %d/%d\n", 
1425       DBG( "Invalid device!\n" );
1432       DBG( "URB mem error\n" );
1462    DBG( "Actual Write:\n" );
1474       DBG( "unable to resume interface: %d\n", result );
1514       DBG( "submit URB error %d\n", result );
1520          DBG( "Didn't get write URB back\n" );
1562       DBG( "Invalid device!\n" );
1579       DBG( "Didn't get write URB back\n" );
1605          DBG( "bad status = %d\n", pWriteURB->status );
1614       DBG( "Interrupted %d !!!\n", result );
1615       DBG( "Device may be in bad state and need reset !!!\n" );
1663       DBG( "Invalid device!\n" );
1707          DBG( "bad read data %d\n", result );
1743       DBG( "Client memory already exists\n" );
1761       DBG( "Error allocating read list\n" );
1817       DBG( "invalid device\n" );
1821    DBG( "releasing 0x%04X\n", clientID );
1833          DBG( "memory error\n" );
1846             DBG( "error %d filling req buffer\n", result );
1858                DBG( "bad write status %d\n", result );
1868                   DBG( "bad read status %d\n", result );
1880                      DBG( "error %d parsing response\n", result );
1974       DBG( "Invalid device\n" );
1982       DBG( "unlocked\n" );
2000    DBG( "Could not find client mem 0x%04X\n", clientID );
2037       DBG( "unlocked\n" );
2046       DBG( "Could not find this client's memory 0x%04X\n",
2062       DBG( "Mem error\n" );
2111       DBG( "unlocked\n" );
2120       DBG( "Could not find this client's memory 0x%04X\n",
2166       DBG( "No read memory to pop, Client 0x%04X, TID = %x\n", 
2207       DBG( "unlocked\n" );
2216       DBG( "Could not find this client's memory 0x%04X\n", clientID );
2230       DBG( "Mem error\n" );
2272       DBG( "unlocked\n" );
2281       DBG( "Could not find this client's memory 0x%04X\n", clientID );
2300       DBG( "skipping data TID = %x\n", (*ppNotifyList)->mTransactionID );
2332       DBG( "no one to notify for TID %x\n", transactionID );
2367       DBG( "unlocked\n" );
2376       DBG( "Could not find this client's memory 0x%04X\n", clientID );
2390       DBG( "Mem error\n" );
2429       DBG( "unlocked\n" );
2438       DBG( "Could not find this client's memory 0x%04X\n", clientID );
2458       DBG( "No URB's to pop\n" );
2502       DBG( "Bad file data\n" );
2508       DBG( "Invalid device! Updating f_ops\n" );
2516          DBG( "Setting up QMI for service %lu\n", arg );
2519             DBG( "Cannot use QMICTL from userspace\n" );
2526             DBG( "Close the current connection before opening a new one\n" );
2545          DBG("pFilpData->mClientID = 0x%x\n", pFilpData->mClientID );
2553             DBG( "Bad VIDPID buffer\n" );
2560             DBG( "Bad mpNetDev\n" );
2565             DBG( "Bad udev\n" );
2575             DBG( "Copy to userspace failure %d\n", result );
2585             DBG( "Bad MEID buffer\n" );
2592             DBG( "Copy to userspace failure %d\n", result );
2654       DBG( "Invalid device\n" );
2662       DBG( "Mem error\n" );
2712       DBG( "bad file data\n" );
2723    DBG( "0x%04X\n", pFilpData->mClientID );
2776       DBG( "bad file data\n" );
2817          DBG( "not closing, as this FD is open by %d other process\n", used );
2824       DBG( "Invalid device! Updating f_ops\n" );
2829    DBG( "0x%04X\n", pFilpData->mClientID );
2881       DBG( "Bad file data\n" );
2887       DBG( "Invalid device! Updating f_ops\n" );
2894       DBG( "Client ID must be set before reading 0x%04X\n",
2915       DBG( "Read data is too large for amount user has requested\n" );
2920    DBG(  "pBuf = 0x%p pSmallReadData = 0x%p, result = %d",
2925       DBG( "Error copying read data to user\n" );
2964       DBG( "Bad file data\n" );
2970       DBG( "Invalid device! Updating f_ops\n" );
2977       DBG( "Client ID must be set before writing 0x%04X\n",
2991       DBG( "Unable to copy data from userspace %d\n", status );
3042       DBG( "Bad file data\n" );
3048       DBG( "Invalid device! Updating f_ops\n" );
3055       DBG( "DeregisterQMIDevice ing\n" );
3061       DBG( "Client ID must be set before polling 0x%04X\n",
3074       DBG( "Could not find this client's memory 0x%04X\n",
3111       DBG( "Invalid device\n" );
3162       DBG( "sync response error code %d\n", result );
3194       DBG( "Device unresponsive to QMI\n" );
3199    DBG( "Sending QMI CTL Sync Request\n" );
3203       DBG( "QMI CTL Sync Procedure Error\n" );
3208       DBG( "QMI CTL Sync Procedure Successful\n" );
3272       DBG( "device already exists\n" );
3323          DBG( "Create qmi_sync_thread fail\n" );
3333       DBG( "Device unresponsive to QMI\n" );
3338    DBG( "Sending QMI CTL Sync Request\n" );
3342       DBG( "QMI CTL Sync Procedure Error\n" );
3347       DBG( "QMI CTL Sync Procedure Successful\n" );
3392       DBG( "error adding cdev\n" );
3408       DBG( "Bad net name: %s\n", pDev->mpNetDev->net->name );
3414       DBG( "Bad minor number\n" );
3477       DBG( "wrong device\n" );
3490       DBG( "QMI sync ing\n" );
3499          DBG("WaitQueue 0x%04X\n", mClientID);
3507       DBG( "release 0x%04X\n", pDev->mQMIDev.mpClientMemList->mClientID );
3565                      DBG( "forcing close of open file handle\n" );
3593       DBG( "Bad SetControlLineState status %d\n", result );
3616          DBG( "cdev in use by %d tasks\n", ref - 1 ); 
3669       DBG( "Invalid device\n" );
3785    DBG( "QMI Ready after %u milliseconds\n", curTime );
3839       DBG( "Invalid device\n" );
3857       DBG( "WDS callback failed to get data\n" );
3879       DBG( "bad WDS packet\n" );
3928          DBG( "Net device link reset\n" );
3937                 DBG( "Net device link is connected\n" );
3944                 DBG( "Net device link is disconnected\n" );
3961       DBG( "unable to setup next async read\n" );
3991       DBG( "Invalid device\n" );
4114       DBG( "unable to setup async read\n" );
4132       DBG( "Bad SetControlLineState status %d\n", result );
4165       DBG( "Invalid device\n" );
4223       DBG( "bad get MEID resp\n" );
4260    DBG("\n");
4264       DBG( "Invalid device\n" );
4352       DBG( "Data Format Cannot be set\n" );