Lines Matching +full:memory +full:- +full:mapped

1 # SPDX-License-Identifier: GPL-2.0-only
7 	bool "Support non-linear mappings of flash chips"
13 	tristate "Flash device in physical memory map"
17 	  ROM driver code to communicate with chips which are mapped
18 	  physically into the CPU's memory. You will need to configure
21 	  with config options or at run-time.
42 	  This is the physical memory location at which the flash chips
43 	  are mapped on your particular target board. Refer to the
44 	  memory map which should hopefully be in the documentation for
54 	  physical memory map between the chips, this could be larger
55 	  than the total amount of flash present. Refer to the memory
70 	bool "Memory device in physical memory map based on OF description"
74 	  and RAM driver code to communicate with chips which are mapped
75 	  physically into the CPU's memory. The mapping description here is
79 	bool "Baikal-T1 Boot ROMs OF-based physical memory map handling"
86 	  This provides some extra DT physmap parsing for the Baikal-T1
87 	  platforms, some detection and setting up ROMs-specific accessors.
90 	bool "ARM Versatile OF-based physical memory map handling"
100 	bool "Cortina Gemini OF-based physical memory map handling"
111 	bool "Intel IXP4xx OF-based physical memory map handling"
122 	bool "GPIO-assisted Flash Chip Support"
131 	tristate "CFI Flash device mapped on PMC-Sierra MSP"
135 	  in which user-programmable flash chips are connected on the
136 	  PMC-Sierra MSP eval/demo boards.
139 	prompt "Maximum mappable memory available for flash IO"
158 	  which user-programmable flash chips are connected on various
163 	tristate "CFI Flash device mapped on AMD SC520 CDP"
166 	  The SC520 CDP board has two banks of CFI-compliant chips and one
167 	  Dual-in-line JEDEC chip. This 'mapping' driver supports that
171 	tristate "CFI Flash device mapped on AMD NetSc520"
179 	tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
184 	  This provides a driver for the on-board flash of the Technologic
185 	  System's TS-5500 board. The 2MB flash is split into 3 partitions
197 	tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
200 	  This provides a driver for the on-board flash of Arcom Control
201 	  Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
208 	tristate "CFI Flash device mapped on Intel XScale PXA2xx based boards"
214 	tristate "Flash device mapped with DOCCS on NatSemi SCx200"
217 	  Enable support for a flash chip mapped using the DOCCS signal on a
229 	  as an MTD device - with this you can reprogram your BIOS.
238 	  as an MTD device - with this you can reprogram your BIOS.
247 	  as an MTD device - with this you can reprogram your BIOS.
256 	  as an MTD device - with this you can reprogram your BIOS.
265 	  as an MTD device - with this you can reprogram your BIOS.
292 	  as an MTD device - with this you can reprogram your BIOS.
304 	tristate "CFI Flash device mapped on Hitachi SolutionEngine"
311 	tristate "CFI Flash device mapped on StrongARM SA11x0"
319 	tristate "CFI Flash device mapped on DC21285 Footbridge"
327 	tristate "CFI Flash device mapped on Intel IXP4xx based systems"
336 	tristate "JEDEC Flash device mapped on impA7"
347 	  Mapping for accessing flash devices on add-in cards like the Intel XScale
357 	  Map driver for accessing PCMCIA linear flash memory cards. These
358 	  cards are usually around 4-16MiB in size. This does not include
390 	tristate "Map driver for platform device RAM (mtd-ram)"
402 	  This driver enables access to the Dreamcast Visual Memory Unit (VMU).
407 	  vmu-flash.
414 	  This driver allows for discovery of PISMO modules - see
416 	  up to five memory devices (eg, SRAM, flash, DOC) described by an