Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/kernel/drivers/mmc/host/Kconfig

12 	  This is an option for use by developers; most people should
13 	  say N here. This enables MMC host driver debugging. And further
21 	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
32 	  This selects the Qualcomm Data Mover lite/local on SD Card controller.
33 	  This option will enable the dma to work correctly, if you are using
43 	  This selects the STMicroelectronics STM32 SDMMC host controller.
52 	  This selects the Intel(R) PXA(R) Multimedia card Interface.
62 	  This selects the generic Secure Digital Host Controller Interface.
75 	  This is silent Kconfig symbol that is selected by the drivers that
83 	  This option is selected by drivers running on big endian hosts
86 	  This endian mapping mode is called "data invariance" and
90 	  This is the case for the Nintendo Wii SDHCI.
99 	  This selects the PCI Secure Digital Host Controller Interface.
111 	  This adds a pci quirk to disable Ricoh MMC Controller. This
125 	  This selects support for ACPI enumerated SDHCI controllers,
137 	  This selects the common helper functions support for Secure Digital
151 	  This selects the Arasan Secure Digital Host Controller Interface
152 	  (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
164 	  This selects the ASPEED Secure Digital Host Controller Interface.
176 	  This selects the Atmel SDMMC driver
185 	  This selects the Freescale eSDHC controller support.
197 	  This selects the Secure Digital Host Controller Interface (SDHCI)
212 	  This selects Synopsys DesignWare Cores Mobile Storage Controller
222 	  This selects the Secure Digital Host Controller Interface (SDHCI)
234 	  This selects the Cadence SD/SDIO/eMMC driver.
245 	  This selects the SDHCI support for CNS3xxx System-on-Chip devices.
257 	  This selects the Freescale eSDHC controller support for
271 	  This selects the Freescale eSDHC/uSDHC controller support
284 	  This selects the Secure Digital Host Controller Interface in
298 	  This selects the Tegra SD/MMC controller. If you have a Tegra
308 	  This selects the Secure Digital Host Controller Interface (SDHCI)
322 	  This selects the SDHCI support for SiRF System-on-Chip devices.
335 	  This selects the Marvell(R) PXAV3 SD Host Controller.
348 	  This selects the Marvell(R) PXAV2 SD Host Controller.
360 	  This selects the Secure Digital Host Controller Interface (SDHCI)
383 	  This selects the Broadcom Kona Secure Digital Host Controller
385 	  This is used in Broadcom mobile SoCs.
394 	  This selects the Secure Digital Host Controller Interface (SDHCI)
405 	  This selects the Secure Digital Host Controller Interface (SDHCI)
419 	  This selects the iProc SD/MMC controller.
431 	  This selects support for the Amlogic SD/MMC Host Controller
432 	  found on the S905/GX*/AXG family of SoCs.  This controller is
443 	  This selects support for the SDHC Host Controller on
457 	  This selects support for the SD/MMC Host Controller on
467 	  This selects support for the MOXART SD/MMC Host Controller.
478 	  This selects the Secure Digital Host Controller Interface in
489 	  This selects the TI OMAP Multimedia card Interface.
499 	  This selects the TI OMAP High Speed Multimedia card Interface.
509 	  This selects the Winbond(R) W83L51xD Secure digital and
527 	  This selects the AMD Alchemy(R) Multimedia card interface.
536 	  This selects the Atmel Multimedia Card Interface driver.
550 	  This selects the Secure Digital Host Controller Interface (SDHCI)
562 	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
572 	  This selects the Freescale SSP MMC controller found on MXS based
585 	  This option 'selects' (turns on, enables) 'TIFM_CORE', but you
598 	  This selects the Marvell SDIO host driver.
609 	  This selects the TI DAVINCI Multimedia card Interface.
617 	  This selects the Goldfish Multimedia card Interface emulation
627 	  instead of using a "native" MMC/SD/SDIO controller.  This has a
639 	  This selects a driver for the MCI interface found in
663 	  move the data. This has been the traditional default for
694 	  This selects the SDIO Host Controller in Spreadtrum
709 	  This provides support for the SD/MMC cell found in TC6393XB,
717 	  This provides support for the SDHI SD/SDIO controller found in
725 	  This provides DMA support for SDHI SD/SDIO controllers
726 	  using SYS-DMAC via DMA Engine. This supports the controllers
735 	  This provides DMA support for SDHI SD/SDIO controllers
736 	  using on-chip bus mastering. This supports the controllers
737 	  found in arm64 based SoCs. This controller is also found in
746 	  This provides support for the SD/eMMC controller found in
755 	  This option enables support for MMC/SD part of ENE CB710/720 Flash
759 	  This driver can also be built as a module. If so, the module
766 	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
768 	  some motherboards manufactured by VIA. This card reader supports
778 	  This selects Cavium OCTEON SD/MMC card Interface.
790 	  This selects Cavium ThunderX SD/MMC Card Interface.
799 	  This selects support for the Synopsys DesignWare Mobile Storage IP
808 	  This selects the common helper functions support for Host Controller
810 	  is present as a platform device. This is the common interface for the
822 	  This selects support for Mellanox BlueField SoC specific extensions to
831 	  This selects support for Samsung Exynos SoC specific extensions to the
840 	  This selects support for HiSilicon Hi3798CV200 SoC specific extensions to the
849 	  This selects support for Hisilicon K3 SoC specific extensions to the
857 	  This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
869 	  This selects support for Rockchip SoC specific extensions to the
878 	  This selects support for ZTE SoC specific extensions to the
886 	  This selects the MMC Host Interface controller (MMCIF) found in various
894 	  This selects support for the SD/MMC controller on Ingenic
904 	  This selects support for Elan Digital Systems' VUB300 chip.
935 	  This selects support for USB SD Host Controllers based on
950 	  This selects support for the SD/MMC Host Controller on
960 	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
981 	  This selects support for the SD/MMC Host Controller on
988 	  This selects the Command Queue Host Controller Interface (CQHCI)
991 	  This controller supports eMMC devices with command queue support.
1000 	  This selects the MMC Host Software Queue support. This may increase
1016 	  This selects the BCM2835 SDHOST MMC controller. If you have
1031 	  This selects the MediaTek(R) Secure digital and Multimedia card Interface.
1033 	  This is needed if support for any SD/SDIO/MMC devices is required.
1040 	  This selects the Secure Digital Host Controller Interface (SDHCI)
1054 	  This selects support for the SDIO/SD/MMC Host Controller on
1063 	  This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1074 	  This selects the Secure Digital Host Controller Interface (SDHCI)
1089 	  This selects the Secure Digital Host Controller Interface (SDHCI)
1102 	  This selects support for the SD/MMC Host Controller on