Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/kernel/drivers/mmc/host/Kconfig

12 	  This is an option for use by developers; most people should
13 	  say N here. This enables MMC host driver debugging. And further
21 	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
32 	  This selects the Qualcomm Data Mover lite/local on SD Card controller.
33 	  This option will enable the dma to work correctly, if you are using
34 	  Qcom SOCs and MMC, you would probably need this option to get DMA working.
43 	  This selects the STMicroelectronics STM32 SDMMC host controller.
52 	  This selects the Intel(R) PXA(R) Multimedia card Interface.
62 	  This selects the generic Secure Digital Host Controller Interface.
64 	  and Toshiba(R). Most controllers found in laptops are of this type.
66 	  If you have a controller with this interface, say Y or M here. You
75 	  This is silent Kconfig symbol that is selected by the drivers that
83 	  This option is selected by drivers running on big endian hosts
86 	  This endian mapping mode is called "data invariance" and
90 	  This is the case for the Nintendo Wii SDHCI.
99 	  This selects the PCI Secure Digital Host Controller Interface.
102 	  If you have a controller with this interface, say Y or M here.
111 	  This adds a pci quirk to disable Ricoh MMC Controller. This
115 	  useless. It is safe to select this even if you don't
125 	  This selects support for ACPI enumerated SDHCI controllers,
129 	  If you have a controller with this interface, say Y or M here.
137 	  This selects the common helper functions support for Secure Digital
140 	  If you have a controller with this interface, say Y or M here.
151 	  This selects the Arasan Secure Digital Host Controller Interface
152 	  (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
154 	  If you have a controller with this interface, say Y or M here.
164 	  This selects the ASPEED Secure Digital Host Controller Interface.
166 	  If you have a controller with this interface, say Y or M here. You
176 	  This selects the Atmel SDMMC driver
185 	  This selects the Freescale eSDHC controller support.
187 	  If you have a controller with this interface, say Y or M here.
197 	  This selects the Secure Digital Host Controller Interface (SDHCI)
201 	  If you have a controller with this interface, say Y or M here.
212 	  This selects Synopsys DesignWare Cores Mobile Storage Controller
214 	  If you have a controller with this interface, say Y or M here.
222 	  This selects the Secure Digital Host Controller Interface (SDHCI)
225 	  If you have a Sparx5 SoC with this interface, say Y or M here.
234 	  This selects the Cadence SD/SDIO/eMMC driver.
236 	  If you have a controller with this interface, say Y or M here.
245 	  This selects the SDHCI support for CNS3xxx System-on-Chip devices.
247 	  If you have a controller with this interface, say Y or M here.
257 	  This selects the Freescale eSDHC controller support for
260 	  If you have a controller with this interface, say Y or M here.
271 	  This selects the Freescale eSDHC/uSDHC controller support
274 	  If you have a controller with this interface, say Y or M here.
284 	  This selects the Secure Digital Host Controller Interface in
287 	  If you have a controller with this interface, say Y or M here.
298 	  This selects the Tegra SD/MMC controller. If you have a Tegra
308 	  This selects the Secure Digital Host Controller Interface (SDHCI)
312 	  If you have a controller with this interface, say Y or M here.
322 	  This selects the SDHCI support for SiRF System-on-Chip devices.
324 	  If you have a controller with this interface, say Y or M here.
335 	  This selects the Marvell(R) PXAV3 SD Host Controller.
348 	  This selects the Marvell(R) PXAV2 SD Host Controller.
360 	  This selects the Secure Digital Host Controller Interface (SDHCI)
364 	  If you have a controller with this interface, say Y or M here.
383 	  This selects the Broadcom Kona Secure Digital Host Controller
385 	  This is used in Broadcom mobile SoCs.
387 	  If you have a controller with this interface, say Y or M here.
394 	  This selects the Secure Digital Host Controller Interface (SDHCI)
396 	  If you have a controller with this interface, say Y or M here.
405 	  This selects the Secure Digital Host Controller Interface (SDHCI)
407 	  If you have a controller with this interface, say Y or M here.
419 	  This selects the iProc SD/MMC controller.
431 	  This selects support for the Amlogic SD/MMC Host Controller
432 	  found on the S905/GX*/AXG family of SoCs.  This controller is
435 	  If you have a controller with this interface, say Y here.
443 	  This selects support for the SDHC Host Controller on
448 	  If you have a controller with this interface, say Y or M here.
457 	  This selects support for the SD/MMC Host Controller on
460 	  If you have a controller with this interface, say Y or M here.
467 	  This selects support for the MOXART SD/MMC Host Controller.
470 	  If you have a controller with this interface, say Y here.
478 	  This selects the Secure Digital Host Controller Interface in
481 	  If you have a controller with this interface, say Y or M here.
489 	  This selects the TI OMAP Multimedia card Interface.
499 	  This selects the TI OMAP High Speed Multimedia card Interface.
509 	  This selects the Winbond(R) W83L51xD Secure digital and
527 	  This selects the AMD Alchemy(R) Multimedia card interface.
536 	  This selects the Atmel Multimedia Card Interface driver.
550 	  This selects the Secure Digital Host Controller Interface (SDHCI)
554 	  If you have a controller with this interface, say Y or M here.
562 	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
572 	  This selects the Freescale SSP MMC controller found on MXS based
585 	  This option 'selects' (turns on, enables) 'TIFM_CORE', but you
590 	  To compile this driver as a module, choose M here: the
598 	  This selects the Marvell SDIO host driver.
602 	  To compile this driver as a module, choose M here: the
609 	  This selects the TI DAVINCI Multimedia card Interface.
617 	  This selects the Goldfish Multimedia card Interface emulation
627 	  instead of using a "native" MMC/SD/SDIO controller.  This has a
639 	  This selects a driver for the MCI interface found in
663 	  move the data. This has been the traditional default for
671 	  Currently, the DMA support in this driver seems to not be
672 	  working properly and needs to be debugged before this
684 	  To compile this driver as a module, choose M here: the
694 	  This selects the SDIO Host Controller in Spreadtrum
695 	  SoCs, this driver supports R11(IP version: R11P0).
697 	  If you have a controller with this interface, say Y or M here.
709 	  This provides support for the SD/MMC cell found in TC6393XB,
717 	  This provides support for the SDHI SD/SDIO controller found in
725 	  This provides DMA support for SDHI SD/SDIO controllers
726 	  using SYS-DMAC via DMA Engine. This supports the controllers
735 	  This provides DMA support for SDHI SD/SDIO controllers
736 	  using on-chip bus mastering. This supports the controllers
737 	  found in arm64 based SoCs. This controller is also found in
746 	  This provides support for the SD/eMMC controller found in
747 	  UniPhier SoCs. The eMMC variant of this controller is used
755 	  This option enables support for MMC/SD part of ENE CB710/720 Flash
759 	  This driver can also be built as a module. If so, the module
766 	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
768 	  some motherboards manufactured by VIA. This card reader supports
770 	  If you have a controller with this interface, say Y or M here.
778 	  This selects Cavium OCTEON SD/MMC card Interface.
790 	  This selects Cavium ThunderX SD/MMC Card Interface.
799 	  This selects support for the Synopsys DesignWare Mobile Storage IP
800 	  block, this provides host support for SD and MMC interfaces, in both
808 	  This selects the common helper functions support for Host Controller
809 	  Interface based platform driver. Please select this option if the IP
810 	  is present as a platform device. This is the common interface for the
813 	  If you have a controller with this interface, say Y or M here.
822 	  This selects support for Mellanox BlueField SoC specific extensions to
823 	  the Synopsys DesignWare Memory Card Interface driver. Select this
831 	  This selects support for Samsung Exynos SoC specific extensions to the
832 	  Synopsys DesignWare Memory Card Interface driver. Select this option
840 	  This selects support for HiSilicon Hi3798CV200 SoC specific extensions to the
841 	  Synopsys DesignWare Memory Card Interface driver. Select this option
849 	  This selects support for Hisilicon K3 SoC specific extensions to the
850 	  Synopsys DesignWare Memory Card Interface driver. Select this option
857 	  This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
858 	  Select this option if the IP is present on PCI platform.
860 	  If you have a controller with this interface, say Y or M here.
869 	  This selects support for Rockchip SoC specific extensions to the
870 	  Synopsys DesignWare Memory Card Interface driver. Select this option
878 	  This selects support for ZTE SoC specific extensions to the
879 	  Synopsys DesignWare Memory Card Interface driver. Select this option
886 	  This selects the MMC Host Interface controller (MMCIF) found in various
894 	  This selects support for the SD/MMC controller on Ingenic
904 	  This selects support for Elan Digital Systems' VUB300 chip.
924 	  To compile this mmc host controller driver as a module,
935 	  This selects support for USB SD Host Controllers based on
939 	  CSR boards with this device include: USB<>SDIO (M1985v2),
950 	  This selects support for the SD/MMC Host Controller on
953 	  To compile this driver as a module, choose M here: the
960 	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
981 	  This selects support for the SD/MMC Host Controller on
988 	  This selects the Command Queue Host Controller Interface (CQHCI)
991 	  This controller supports eMMC devices with command queue support.
993 	  If you have a controller with this interface, say Y or M here.
1000 	  This selects the MMC Host Software Queue support. This may increase
1003 	  If you have a controller/driver supporting this interface, say Y or M
1016 	  This selects the BCM2835 SDHOST MMC controller. If you have
1021 	  sdhost controller (supported by this driver).
1031 	  This selects the MediaTek(R) Secure digital and Multimedia card Interface.
1033 	  This is needed if support for any SD/SDIO/MMC devices is required.
1040 	  This selects the Secure Digital Host Controller Interface (SDHCI)
1043 	  If you have a controller with this interface, say Y or M here.
1054 	  This selects support for the SDIO/SD/MMC Host Controller on
1063 	  This selects Marvell Xenon eMMC/SD/SDIO SDHCI.
1064 	  If you have a controller with this interface, say Y or M here.
1074 	  This selects the Secure Digital Host Controller Interface (SDHCI)
1078 	  If you have a controller with this interface, say Y or M here.
1089 	  This selects the Secure Digital Host Controller Interface (SDHCI)
1093 	  If you have a controller with this interface, say Y or M here.
1102 	  This selects support for the SD/MMC Host Controller on