Kconfig - OpenGrok cross reference for /OK3568_Linux_fs/kernel/drivers/i2c/busses/Kconfig

16 	  If you say yes to this option, support will be included for the SMB
21 	  This driver can also be built as a module.  If so, the module
28 	  If you say yes to this option, support will be included for the SMB
33 	  This driver can also be built as a module.  If so, the module
40 	  If you say yes to this option, support will be included for the
43 	  This driver can also be built as a module.  If so, the module
50 	  If you say yes to this option, support will be included for the AMD
55 	  This driver can also be built as a module.  If so, the module
62 	  Enabling this option will add specific SMBus support for the Tyan
63 	  S4882 motherboard.  On this 4-CPU board, the SMBus is multiplexed
68 	  This driver can also be built as a module.  If so, the module
75 	  If you say yes to this option, support will be included for the
78 	  This driver can also be built as a module.  If so, the module
85 	  If you say yes to this option, support will be included for the AMD
88 	  This driver can also be built as modules.  If so, the modules will
98 	  This driver can also be built as a module. If so, the module
107 	  If you say yes to this option, support will be included for the Intel
152 	  This driver can also be built as a module.  If so, the module
163 	  This driver can also be built as a module. If so, the module
170 	  If you say yes to this option, support will be included for the Intel
173 	  This driver can also be built as a module.  If so, the module will be
180 	  If you say yes to this option, support will be included for the Intel
204 	  controllers. This driver will attempt to use both controllers
207 	  This driver can also be built as a module.  If so, the module
214 	  If you say yes to this option, support will be included for the
218 	  Note this controller is hooked up to a TI bq24292i charger-IC,
226 	  If you say yes to this option, support will be included for the Nvidia
229 	  This driver can also be built as a module.  If so, the module
236 	  Enabling this option will add specific SMBus support for the Tyan
237 	  S4985 motherboard.  On this 4-CPU board, the SMBus is multiplexed
242 	  This driver can also be built as a module.  If so, the module
249 	  If you say yes to this option, support will be included for the
251 	  Type-C controller. This driver can also be built as a module called
258 	  If you say yes to this option, support will be included for the
261 	  This driver can also be built as a module.  If so, the module
268 	  If you say yes to this option, support will be included for the
271 	  This driver can also be built as a module.  If so, the module
278 	  If you say yes to this option, support will be included for the SiS
289 	  This driver can also be built as a module.  If so, the module
297 	  If you say yes to this option, support will be included for the VIA
300 	  This driver can also be built as a module.  If so, the module
307 	  If you say yes to this option, support will be included for the VIA
322 	  This driver can also be built as a module.  If so, the module
332 	  This driver supports the SMBus Control Method Interface. It needs the
336 	  To compile this driver as a module, choose M here:
349 	  This supports the use of the I2C interface in the Apple Hydra Mac
353 	  This support is also available as a module.  If so, the module
361 	  This exposes the various PowerMac i2c interfaces to the linux i2c
365 	  This support is also available as a module.  If so, the module
375 	  If you say yes to this option, support will be included for the
378 	  This driver can also be built as a module.  If so, the module
385 	  If you say yes to this option, support will be included for the
388 	  This driver can also be built as a module.  If so, the module
395 	  This supports the use of the I2C interface on Atmel AT91
401 	  unless your system can cope with this limitation.
407 	  are facing this situation, use the i2c-gpio driver.
414 	  If you say yes to this option, support for the slave mode will be
415 	  added. Caution: do not use it for production. This feature has not
426 	  If you say yes to this option, support will be included for the
429 	  This driver can also be built as a module.  If so, the module
440 	  Please note that this controller is limited to transfers of maximum
449 	  If you say yes to this option, support will be included for the
454 	  This support is also available as a module.  If so, the module
463 	  If you say yes to this option, support will be included for the
473 	  If you say yes to this option, support will be included for the
484 	  If you say yes to this option, support will be included for the
493 	  Say yes here to select Cadence I2C Host Controller. This controller is
503 	  This driver can also be built as a module.  If so, the module
510 	  This supports the use of the I2C interface on Freescale
513 	  This driver can also be built as a module.  If so, the module
522 	  This driver can also be built as a module.  If so, the module
525 	  Please note that this driver might be needed to bring up other
538 	  If you say yes to this option, support will be included for the
541 	  This is not a standalone module, this module compiles together with
550 	  If you say yes to this option, support will be included for the
553 	  This driver can also be built as a module.  If so, the module
563 	  This driver enables managed host access to the PMIC I2C bus on select
574 	  If you say yes to this option, support will be included for the
577 	  This driver can also be built as a module.  If so, the module
586 	  This driver can also be built as a module.  If so, the module
593 	  This driver supports the i2c block found in Energy Micro's EFM32
600 	  This driver is for PCH(Platform controller Hub) I2C of EG20T which
602 	  This driver can access PCH I2C bus device.
604 	  This driver also can be used for LAPIS Semiconductor IOH(Input/
616 	  If you say yes to this option, support will be included for the
632 	  This is a very simple bitbanging I2C driver utilizing the
639 	  This adds some functionality to the i2c-gpio driver which can inject
641 	  This is for debugging. If unsure, say 'no'.
647 	  If you say yes to this option, support will be included for
650 	  FPGAs. This is wholly unrelated to the SoC I2C.
652 	  This driver can also be built as a module.  If so, the module
662 	  This driver can also be built as a module.  If so, the module
672 	  This driver can also be built as a module.  If so, the module
682 	  This driver can also be built as a module.  If so, the module
692 	  This driver can also be built as a module. If so, the module
702 	  This driver can also be built as a module.  If so, the module
709 	 If you say yes to this option, support will be included for the
718 	  This enables support for the I2C bus interface on some Kontron ETX
721 	  This driver can also be built as a module. If so, the module
728 	  This driver supports the I2C interface found several NXP
731 	  This driver can also be built as a module.  If so, the module
739           Enabling this option will add I2C SMBus support for Mellanox BlueField
742           This driver can also be built as a module. If so, the module will be
745           This driver implements an I2C SMBus host controller and enables both
753 	  If you say yes to this option, support will be included for the
760 	  If you say yes to this option, support will be included for the
764 	  This driver can also be built as a module.  If so, the module
771 	  This selects the MediaTek(R) Integrated Inter Circuit bus driver
787 	  If you say yes to this option, support will be included for the
789 	  This driver is also used for Allwinner SoCs I2C controllers.
791 	  This driver can also be built as a module.  If so, the module
802 	  This driver can also be built as a module.  If so, the module
809 	  If you say yes to this option, support will be included for the
817 	  If you say yes to this option, support will be included for the
825 	  If you say yes to this option, support will be included for the
829 	  This driver can also be built as a module.  If so, the module
837 	  If you say yes to this option, support will be included for the
859 	  This driver supports a memory mapped Philips PCA9564/PCA9665
862 	  This driver can also be built as a module.  If so, the module
869 	  This driver supports the PMC TWI controller on MSP devices.
871 	  This driver can also be built as module. If so, the module
878 	  This driver supports the Philips IP3204 I2C IP block master and/or
881 	  This driver can also be built as a module.  If so, the module
888 	  If you have devices in the PXA I2C bus, say yes to this option.
889 	  This driver can also be built as a module.  If so, the module
900 	  Support I2C slave mode communications on the PXA I2C bus.  This
908 	  If you say yes to this option, support will be included for the
911 	  This driver can also be built as a module.  If so, the module
919 	  This driver supports GENI serial engine based I2C controller in
921 	  yes to this option, support will be included for the built-in I2C
924 	  This driver can also be built as a module.  If so, the module
931 	  If you say yes to this option, support will be included for the
934 	  This driver can also be built as a module.  If so, the module
941 	  If you say yes to this option, support will be included for the
944 	  This driver can also be built as a module.  If so, the module
954 	  This driver can also be built as a module. If so, the module will
960 	  This will include I2C support for Samsung SoCs. If you want to
961 	  include I2C support for any machine, kindly select this in the
975 	  This driver supports the 2 I2C interfaces on the Renesas SH7760.
977 	  This driver can also be built as a module.  If so, the module
984 	  If you say yes to this option, support will be included for the
987 	  This driver can also be built as a module.  If so, the module
994 	  If you say yes to this option, support will be included for
995 	  the Simtec Generic I2C interface. This driver is for the
999 	  This driver can also be built as a module. If so, the module
1006 	  If you say yes to this option, support will be included for the
1009 	  This driver can also be built as a module.  If so, the module
1017 	  If you say yes to this option, support will be included for the
1024 	  Enable this option to add support for STMicroelectronics SoCs
1027 	  This driver can also be built as module. If so, the module
1034 	  Enable this option to add support for STM32 I2C controller embedded
1037 	  This driver can also be built as module. If so, the module
1046 	  Enable this option to add support for STM32 I2C controller embedded
1049 	  This driver can also be built as module. If so, the module
1057 	  If you say yes to this option, support will be included for the
1062 	  This driver can also be built as a module. If so, the module
1070 	  If you say yes to this option, support will be included for the
1075 	  This interface is used to connect to specific PMIC devices (like the
1085 	  This driver can also be built as a module. If so, the module
1093 	  If you say yes to this option, support will be included for the
1101 	  If you say yes to this option, support will be included for the I2C
1104 	  This I2C driver is a 'virtual' I2C driver. The real driver is part
1105 	  of the BPMP firmware, and this driver merely communicates with that
1112 	  If you say yes to this option, support will be included for
1120 	  If you say yes to this option, support will be included for
1132 	  This driver can also be built as a module.  If so, the module
1142 	  This driver can also be built as a module. If so, the module will be
1152 	  This driver can also be built as a module.  If so, the module
1163 	  This driver can also be built as a module.  If so, the module
1170 	  If you say yes to this option, support will be included for the
1173 	  This driver can also be built as a module.  If so, the module
1180 	  This driver enables support for the on-chip I2C interface of
1183 	  This driver can also be built as a module.  If so, the module
1190 	  This driver enables support for the on-chip I2C interface of
1193 	  This driver can also be built as a module.  If so, the module will
1203 	  If you say yes to this option, support will be included for the
1206 	  This driver can also be built as a module.  If so, the module
1215 	  If you say yes to this option, support will be included for Diolan
1218 	  This driver can also be built as a module.  If so, the module
1225 	 If you say yes to this option, support will be included for Diolan
1228 	 This driver can also be built as a module.  If so, the module
1237 	  This supports parallel port I2C adapters such as the ones made by
1240 	  no extra chipset is supported by this driver, or could be. Please
1243 	  This support is also available as a module.  If so, the module
1250 	  If you say yes to this option, support will be included for the
1253 	  This driver can also be built as a module.  If so, the module
1262 	  This supports TAOS evaluation modules on serial port. In order to
1263 	  use this driver, you will need the inputattach tool, which is part
1268 	  This support is also available as a module.  If so, the module
1275 	  If you say yes to this option, support will be included for the
1279 	  This driver can also be built as a module.  If so, the module
1309 	  This supports the PCF8584 ISA bus I2C adapter.  Say Y if you own
1312 	  This support is also available as a module.  If so, the module
1320 	  This supports the PCF8584 Zorro bus I2C adapter, known as ICY.
1323 	  This support is also available as a module.  If so, the module
1333 	  This exposes the Mellanox platform I2C busses to the linux I2C layer
1337 	  This driver can also be built as a module. If so, the module will be
1345 	  This driver supports ISA boards using the Philips PCA9564/PCA9665
1348 	  This driver can also be built as a module.  If so, the module
1351 	  This device is almost undetectable and using this driver on a
1352 	  system which doesn't have this device will result in long
1368 	  connected there. This will work whatever the interface used to
1389 	  This support is also available as a module.  If so, the module
1397 	  This exposes the PowerNV platform i2c busses to the linux i2c layer,
1400 	  This driver can also be built as a module. If so, the module will be
1408 	  Selecting this option will add ZX2967 I2C driver.
1409 	  This driver can also be built as a module. If so, the module will be
1420 	  This driver can also be built as a module. If so, the module will be