28 #define REG_NORTHBRIDGE_CAP		0xe8
31 #define REG_PROCESSOR_TDP		0x1b8
34 #define REG_TDP_RUNNING_AVERAGE		0xe0
35 #define REG_TDP_LIMIT3			0xe8
44 #define PCI_DEVICE_ID_AMD_15H_M70H_NB_F4 0x15b4
67 	return boot_cpu_data.x86 == 0x15 && boot_cpu_data.x86_model >= 0x60;  in is_carrizo_or_later()
90 		running_avg_capture = (val >> 4) & 0x3fffff;  in power1_input_show()
94 	running_avg_range = (val & 0xf) + 1;  in power1_input_show()
106 		tdp_limit = (val >> 16) & 0x1fff;  in power1_input_show()
167 	memset(data->cu_on, 0, sizeof(int) * MAX_CUS);  in read_registers()
196 	return 0;  in read_registers()
217 		return 0;  in power1_average_show()
219 	for (cu = 0; cu < cu_num; cu++) {  in power1_average_show()
226 		return 0;  in power1_average_show()
230 		return 0;  in power1_average_show()
232 	for (cu = 0, avg_acc = 0; cu < cu_num; cu++) {  in power1_average_show()
234 		if (data->cu_on[cu] == 0)  in power1_average_show()
279 	/* the interval value should be greater than 0 */  in power1_average_interval_store()
280 	if (temp <= 0)  in power1_average_interval_store()
296 	if (c->x86 == 0x15 &&  in fam15h_power_init_attrs()
297 	    (c->x86_model <= 0xf ||  in fam15h_power_init_attrs()
298 	     (c->x86_model >= 0x60 && c->x86_model <= 0x7f)))  in fam15h_power_init_attrs()
312 	n = 0;  in fam15h_power_init_attrs()
314 	if (c->x86 == 0x15 &&  in fam15h_power_init_attrs()
315 	    (c->x86_model <= 0xf ||  in fam15h_power_init_attrs()
316 	     (c->x86_model >= 0x60 && c->x86_model <= 0x7f)))  in fam15h_power_init_attrs()
326 	return 0;  in fam15h_power_init_attrs()
343  * initialize the running average range (was: 0xE, now: 0x9). This avoids
349 	{ 0 }
366 	if ((val & 0xf) != 0xe)  in tweak_runavg_range()
369 	val &= ~0xf;  in tweak_runavg_range()
370 	val |=  0x9;  in tweak_runavg_range()
380 	return 0;  in fam15h_power_resume()
395 	tmp = val & 0xffff;  in fam15h_power_init_data()
400 	data->tdp_to_watts = ((val & 0x3ff) << 6) | ((val >> 10) & 0x3f);  in fam15h_power_init_data()
419 		return 0;  in fam15h_power_init_data()
426 	data->cpu_pwr_sample_ratio = cpuid_ecx(0x80000007);  in fam15h_power_init_data()
474 	data->groups[0] = &data->group;  in fam15h_power_probe()
478 							   &data->groups[0]);  in fam15h_power_probe()