Lines Matching +full:bd71828 +full:- +full:pmic

1 # SPDX-License-Identifier: GPL-2.0-only
57 non-sleeping contexts. They can make bitbanged serial protocols
115 tristate "GPIO driver for 74xx-ICs with MMIO access"
119 Say yes here to support GPIO functionality for 74xx-compatible ICs
135 If driver is built as a module it will be called gpio-altera.
285 tristate "Generic memory-mapped GPIO controller support (MMIO platform device)"
288 Say yes here to support basic platform_device memory-mapped GPIO controllers.
316 ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8
334 depends on ARM # For <asm/mach-types.h>
352 bool "Loongson-2/3 GPIO support"
355 driver for GPIO functionality on Loongson-2F/3A/3B processors.
442 Say yes here to support the on-chip GPIO lines on the OCTEON
463 tristate "Spreadtrum PMIC EIC support"
468 Say yes here to support Spreadtrum PMIC EIC device.
477 tristate "Renesas R-Car GPIO"
481 Say yes here to support GPIO on Renesas R-Car SoCs.
495 A 32-bit single register GPIO fixed in/out implementation. This
516 maintain their value during backup/self-refresh.
534 via a SIOX bus and have a number of fixed-direction I/O lines.
542 This is a single-register MMIO GPIO driver for complex cases
611 tristate "TS-4800 DIO blocks and compatibles"
616 This driver support TS-4800 FPGA GPIO controllers.
619 tristate "Cavium ThunderX/OCTEON-TX GPIO"
626 Say yes here to support the on-chip GPIO lines on the ThunderX
627 and OCTEON-TX families of SoCs.
645 tristate "NEC VR4100 series General-purpose I/O Uint support"
648 Say yes here to support the NEC VR4100 series General-purpose I/O Uint
670 bool "APM X-Gene GPIO controller support"
673 This driver is to support the GPIO block within the APM X-Gene SoC
679 tristate "APM X-Gene GPIO standby controller support"
685 This driver supports the GPIO block within the APM X-Gene
742 tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)"
745 as found on G-series SOCs (eg. GX-412TC)
752 menu "Port-mapped I/O GPIO drivers"
756 tristate "ACCES 104-DIO-48E GPIO support"
761 Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E,
762 104-DIO-24E). The base port addresses for the devices may be
767 tristate "ACCES 104-IDIO-16 GPIO support"
772 Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16,
773 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The
779 tristate "ACCES 104-IDI-48 GPIO support"
784 Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A,
785 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for
793 This option enables support for GPIOs found on Fintek Super-I/O
797 be called f7188x-gpio.
800 tristate "Diamond Systems GPIO-MM GPIO support"
804 Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12.
806 The Diamond Systems GPIO-MM device features 48 lines of digital I/O
840 system from the Suspend-to-RAM state.
846 Twenty-one are powered by the core power rail and 9 from the
859 be called gpio-sch311x.
862 tristate "TS-5500 DIO blocks and compatibles"
867 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600
880 boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO
884 be called gpio-winbond.
916 tristate "Avionic Design N-bit GPIO expander"
939 This driver provides an in-kernel interface to those GPIOs using
940 platform-neutral GPIO calls.
947 Expander. This is used at least on the Cambria GW2358-4.
953 GPIO driver for Maxim MAX7300 I2C-based GPIO expander.
956 tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
958 Say yes here to support the MAX7319, MAX7320-7327 series of I2C
960 Input (designated by 'I'), Push-Pull Output ('O'), or Open-Drain
991 Say yes here to provide access to several register-oriented
1016 tristate "PCA9570 4-Bit I2C GPO expander"
1021 be called gpio-pca9570.
1028 Say yes here to provide access to most "quasi-bidirectional" I2C
1045 This driver provides an in-kernel interface to those GPIOs using
1046 platform-neutral GPIO calls.
1049 tristate "TPIC2810 8-Bit I2C GPO expander"
1054 be called gpio-tpic2810.
1062 Series supported include TS-4100, TS-4900, TS-7970 and TS-7990.
1069 tristate "GPIO Support for ADP5520 PMIC"
1072 This option enables support for on-chip GPIO found
1093 Support for GPIOs on ROHM BD70528 PMIC. There are four GPIOs
1094 available on the ROHM PMIC in total. The GPIOs can also
1098 will be called gpio-bd70528.
1101 tristate "ROHM BD71828 GPIO support"
1104 Support for GPIOs on ROHM BD71828 PMIC. There are three GPIOs
1105 available on the ROHM PMIC in total. The GPIOs are limited to
1110 will be called gpio-bd71828.
1116 Support for GPIOs on ROHM BD9571 PMIC. There are two GPIOs
1117 available on the ROHM PMIC in total, both of which can also
1121 will be called gpio-bd9571mwv.
1124 tristate "GPIO support for Crystal Cove PMIC"
1128 Support for GPIO pins on Crystal Cove PMIC.
1130 Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC
1134 called gpio-crystalcove.
1159 The Dialog DA9055 PMIC chip has 3 GPIO pins that can be
1162 If driver is built as a module it will be called gpio-da9055.
1174 will be called gpio-dln2.
1185 tristate "Janz VMOD-TTL Digital IO Module"
1188 This enables support for the Janz VMOD-TTL Digital IO module.
1200 called gpio-kempld.
1218 called gpio-lp873x.
1228 called gpio-lp87565.
1237 tristate "GPIO support for PMIC MAX77620 and MAX20024"
1241 GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor.
1242 MAX77620 PMIC has 8 pins that can be configured as GPIOs. The
1250 GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor.
1286 called gpio-sl28cpld.
1361 tristate "TQ-Systems QTMX86 GPIO"
1372 Say yes here to access the GPIO signals of various multi-function
1390 tristate "GPIO support for Whiskey Cove PMIC"
1394 Support for GPIO pins on Whiskey Cove PMIC.
1396 Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC
1400 called gpio-wcove.
1448 This chip can be found on Miro, Hauppauge and STB TV-cards.
1453 Documentation/driver-api/gpio/bt8xxgpio.rst
1492 Hub) which is for IVI(In-Vehicle Infotainment) use.
1512 tristate "ACCES PCI-IDIO-16 GPIO support"
1515 Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is
1521 tristate "ACCES PCIe-IDIO-24 GPIO support"
1524 Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24,
1525 PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated
1531 tristate "RDC R-321x GPIO support"
1552 tristate "74x164 serial-in/parallel-out 8-bits shift register"
1555 Driver for 74x164 compatible serial-in/parallel-out 8-outputs
1564 MAX31953 and MAX31963 industrial serializer, a daisy-chainable
1573 GPIO driver for Maxim MAX7301 SPI-based GPIO expander.
1576 tristate "Freescale MC33880 high-side/low-side switch"
1578 SPI driver for Freescale MC33880 high-side/low-side switch.
1582 tristate "Generic parallel-in/serial-out shift register"
1584 GPIO driver for SPI compatible parallel-in/serial-out shift
1588 tristate "EXAR XRA1403 16-bit GPIO expander"
1591 GPIO driver for EXAR XRA1403 16-bit SPI-based GPIO expander.
1626 - Assign permissions for a collection of GPIO lines to a user,
1627 - Export a collection of GPIO lines to a virtual machine,
1628 - Provide a generic driver for a GPIO-operated device in an
1640 tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in